Question about Konica Minolta DiMAGE G400 Digital Camera

1 Answer

What is system error MFOOC - Konica Minolta DiMAGE G400 Digital Camera

Posted by on

  • Tome Joao Bosco Sep 30, 2011

    O que fazer para resolver o erro do sistema MFOOC

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

The problem is that the lens has become stuck in the barrel after dropping it. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

Hope the advise is useful.

Regards
Andrea

Posted on Aug 29, 2010

  • vonnyf1 Sep 26, 2010

    well well well happy that hoover sugestion was awsome, as sonn as i read it my mrs took it to the hoover give it a go n hey presto the lens popped out n now seems 2 b working fine,, !!!!!!! TRIPPIN MAN the wonderfull web, thanx a million andrea as we love this little camera

×

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 420 Answers

SOURCE: Error system MFOOC

try these:-

  • connect it to pc and on it
  • vaccum the barrel of lens
  • changing mem. card and batt. for 2min.
  • shake it.
  • on and off in different positions
  • hit the part near lens softly with palm (trust me this made mine work)

Posted on Sep 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Long beep at startup


Probable Causes
Error
Beep Codes
Defective system board.
Memory refresh failure.
1
Faulty DIMM or defective system board.
Error occurred in first 64 KB of main memory.
2
Faulty DIMM.
Read or write error occurred in first 64 KB of main memory.
3
Defective system board.
Timer on system board malfunctioned.
4
Defective microprocesor.
Microprocessor error.
5
Defective system board.
Gate A20 failure.
6
Defective microprocessor.
Microprocessor-execption interrupt error.
7
Missing or faulty video adapter.
Video memory read/write error.
8
Corrupted system BIOS program or defective system BIOS chip.
ROM checksum value does not match value encoded in system BIOS.
9
Defective system board.
NVRAM shutdown register read/write error.
10
Defective microprocessor or cache card.
Cache memory error.
11
Faulty video adapter.
Video adapter failure.
12
Loose video cable connection or defective video cable.Faulty video adapter.
No monitor connected.
13
14

May 09, 2013 | Lenovo 3000 N100 CoreDT2080 VB PC Notebook

1 Answer

Dell 4 beeps


POST Beep Codes

How to fix Dell BIOS 8 beep error.


Probable Causes
Error
Beep Codes
Defective system board.
Memory refresh failure.
1
Faulty DIMM or defective system board.
Error occurred in first 64 KB of main memory.
2
Faulty DIMM.
Read or write error occurred in first 64 KB of main memory.
3
Defective system board.
Timer on system board malfunctioned.
4
Defective microprocesor.
Microprocessor error.
5
Defective system board.
Gate A20 failure.
6
Defective microprocessor.
Microprocessor-execption interrupt error.
7
Missing or faulty video adapter.
Video memory read/write error.
8
Corrupted system BIOS program or defective system BIOS chip.
ROM checksum value does not match value encoded in system BIOS.
9
Defective system board.
NVRAM shutdown register read/write error.
10
Defective microprocessor or cache card.
Cache memory error.
11
Faulty video adapter.
Video adapter failure.
12
Loose video cable connection or defective video cable.Faulty video adapter.
No monitor connected.
13
14

May 09, 2013 | Dell Inspiron 1018 Notebook

5 Answers

My computer has a critical error on the adress 0x3BC3, how do i solv it?


It might be a fake error message. Use this code 754-896-324-589-742 to unlock your computer. More information about this infections:
http://deletemalware.blogspot.com/2011/07/system-process-at-address-0x3bc3-have.html

Jun 26, 2011 | ASUS Eee PC 901 20G Notebook

7 Answers

Sir, there is an error i.e system error e225 in my canon mf 4350d machine please help me shut out this problem


Sir, there is an error i.e system error e225 in display my canon mf 4350d machine please help me shut out this problem

Apr 11, 2011 | Canon ImageCLASS MF4350d Laser All-in-One ...

1 Answer

What is this error mean that i get during boot up? 312.198 Eth0:(185488) System Error Occurred (0) 312.199 Eth0:(185489) System Error Occurred (0) 312.200 Eth0:(185490) System Error Occurred...


Hi,

I think this is related to to the NIC (Ethernet port).

Go into the BIOS and set it to default settings, see if that resolves the problem.



Let me know how you get on.



Regards.

Jun 30, 2010 | MSI P4MAM2-V Motherboard

1 Answer

System error


This eroor usually comes due to faulty sliding mechanism.Put a bit of force on the focussing lense to push it back into camera casing. That's the reason the sliding mechanism won't work. The lense is stuck and if you force it back in, the sliding mechanism will work again. Not responsible if your camera screws up, so try at your own risk.

Or else try out this method

Pull the lens fully out and then it will work.It will be bit tricky to get the lens out. Use your nail to "grab" between the outer glass and the little plastic cover.

Hope this will work for others too.

Aug 28, 2009 | Konica Minolta DiMAGE G400 Digital Camera

1 Answer

Error system MFOOC


try these:-
  • connect it to pc and on it
  • vaccum the barrel of lens
  • changing mem. card and batt. for 2min.
  • shake it.
  • on and off in different positions
  • hit the part near lens softly with palm (trust me this made mine work)

Aug 08, 2008 | Konica Minolta DiMAGE G530 Digital Camera

1 Answer

Lens will not retract


When the lens will not retract and camera is not functional (no picture on display, and does not shoot) , and you already tried replacing batteries with a new fresh set (ensure please) , and then restarting camera with no memory card inside, then camera is faulty.

Try an easy fix by pushing gently the lens (do not force them, just help them) while you turn off camera at same time. Try also switching the mode selector.

If still no luck , then the camera must be disassembled to fix the problem.

Possible reasons are :

  • Faulty lens mechanism or jammed lens (camera usually turns off by itself in this case)
  • Main board faulty.
  • Ribbon cable to main board broken or connector defective.
  • If there is no power at all it is the connector from batteries to main board, this is also a ribbon cable.

If the camera is less than one year old will be replaced by manufacturer.

If your warranty is expired you can get an estimate for repair from manufacturer, or from a third party like Advance Camera here :Advance Camera Repair you can book the repair online.

Aug 03, 2008 | Fuji FinePix F20 Digital Camera

4 Answers

Lens will not retract


In my case, there was dust in the switches that sense the cover movement.
  1. Close the sliding door and wait until the lens is drown inside (timeout).
  2. Open the screws that secure the front cover.
  3. Remove the sliding door covering the lens. There is no trick (hidden screws etc) so just use the force. The door is mounted by two-sided tape and adhesive.
  4. Remove the front cover. This is also mounted by two-sided tape / adhesive in the center, so you have to be a bit brave.
  5. The sliding door rails and the movement sensors are now visible. Clean all dirt.
  6. Try the door functionality.
  7. Mount the front cover after the lens works as it should. Close the screws.
  8. Mount the sliding door.

May 27, 2006 | Konica Minolta DiMAGE G400 Digital Camera

Not finding what you are looking for?
Konica Minolta DiMAGE G400 Digital Camera Logo

298 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Cameras Experts

kakima

Level 3 Expert

102366 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Willem.
Willem.

Level 2 Expert

359 Answers

Are you a Konica Minolta Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...