- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Put a cd in the dvd player then tune to the channel and it should work, then try a dvd.
When dvd player does not boot up and display the Kia logo, try moving the door as the hinge turns on the screen and sometimes the connection in the hinge can play up a bit.
there is a safety brake wire that needs to be hooked up. If it was installed professionally, have them explain it to you.There is not supposed to be any video players in view of the driver while in motion. Stop your car and put on the parking brake. If you installed it yourself, you probably didnt hook up the wire. Look inthe install manual for DVD safety wire.
jensen is not such a great brand for indash. if you have the receipt or warranty you might want to return it and get yourself a new one. I know this because when i bought my phase linear i didnt want to eject the cd and the guy told me that they come very defective sometimes
You have to use a sequence of the brake, on/off/on, for 3-5 seconds at a time, in order for it to play. Want an easier way? Try this:
This will work with out haveing to do anything to the pink wire just
tape it and leave it alone. But the next time you unhook ur battery
cable you will have to put the code in again. Put in DVD right when the blue screen comes up hit STOP twice punch in 1,2,6, and 4 hit DOWN 1 time not 2 hit PLAY/ENTER **at this point the display became visible and i could now see the menu which made it much easier. hit DOWN one more time to change macrovision hit PLAY/ENTER hit SYS SETUP twice to save and exit menu
I did it on mine and it works perfectly - no more messing with switches and ebrakes:)