Question about Canon PIXMA MP160 All-In-One InkJet Printer

1 Answer

Error msg 2--will not print

Rec'd error msg 2 now will not print

Posted by on

  • Anonymous May 10, 2008

    ink absorber full

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Expert
  • 377 Answers

Hi dear

this the error code
E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error
E2-2 No paper (ASF)
E3-3 Paper jam
E4 No ink
E5-5 The ink cartridges are not installed or a non-supported ink cartridge is installed ,
or the ink cartridges are not installed properly
E8 Waste ink absorber full, or platen waste ink absorber full




First, download the software at http://www.box.net/shared/4yblbn34kg

Secondly, to run the software your printer has to be in service mode. Do that by
- unplug cable
- press and hold "power" button
- plug cable
- press "resume" and release
- release the "power" button
At this stage, your computer will detect a new hardware

Run the software.

oke


Posted on Jun 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Describe your Officejet Pro L7680 All-In-One Printer Problem I get the error message that my black ink cartridge is empty. I replaced it with a new one and still had the error msg. I went through the...


Hi rainbow1785,

To correct this issue, please follow the steps below. With the new cartridge inserted, reset the unit to its factory setting.

1. Unplug the power cord from the HP All-in-One.
2. Wait for 20 seconds.
3. Press and hold # and 3 while plugging in the power cord to the HP All-in-One.
4. Release the buttons after the HP All-in-One starts up.
5. The HP All-in-One will now be reset to factory defaults.

Hope it helps.

Thank you for using FixYa.

Aug 23, 2011 | HP Officejet Pro L7680 All-In-One Printer

1 Answer

What button do I press to generate a Fax report - this is not always generated automatically.


Sounds like your Fax Options are set to print on error only. If you want to have both confirmations and error pages do the following:
1 Press Menu until “Fax Setup” appears on the top line of the display. Press Enter.
2 Use the scroll button to find MSG Confirm. Press enter.
3 It may be selected to On-Err. Use the scroll arrow buttons to get to On. Press Enter.
4 To return to Standby mode, press Stop/Clear.
This should make your fax print out a confirmation on a successful or failure transmit of your fax.
If you want to print out the last few sent or receive faxes:
Printing a Report
1 Press Menu until “Reports” appears on the top line of the display.
2 Press the scroll arrow buttons to display the report or list you want to print on the bottom line.
•Phone Book: Phonebook list •Sent Report: Sent fax report •RCV Report: Received fax report •System Data: System data list •Scheduled Jobs: Scheduled job information •MSG Confirm: Message confirmation •Junk Fax List: Junk fax number list
3 Press Enter. The selected information prints out.
You can find your manual in English by clicking here.
Good luck!
------------------------------------------------------ Please rate this post if it helps you! :)

Dec 08, 2009 | Samsung SCX 4521F All-In-One Laser Printer

1 Answer

Error msg says "COLD PRINT HEAD"


Hello,

1. The Printhead/Controller
cable assembly is
disconnected.
2. The environment is too cold
for the printhead to sustain
operating temperature.
1. Make sure the printhead/
controller cable assembly is
connected to J401 at the
printhead and J6 on the
controller PCBA.
2. Move the printer to a
warmer location.

If none of this works you might have a bad printhead. The thermistor on the printhead has gone bad and needs to be replaced.

Please contact me if a printhead is needed or if you have any other questions. I am also an ASR for Printronix meaning I can supply you with new and used parts and printers.

Thanks

Rory Cardenas
Midrange Repair and Parts
Alsip IL 60803
708-597-4222 x240
rcardenas@mrp.to
AOL IM: RORYMRP

May 16, 2009 | Printronix T5000 Thermal Printer

1 Answer

Sc 741 error msg


Sounds like a fuser has malfunctioned, you need a new one

Nov 20, 2008 | Ricoh Aficio CL3500N Laser Printer

2 Answers

Lexmark x1185 cartridge error msg


Step 1). Try cleaning the gold contacts on the print cartridge and on the printer itself with a pen eraser and a little alcohol.

Step 2). Uninstall the printer software and reinstall it.

Step 3). If the above two steps fail try a new cartridge. If none of these solutions work there is an electronic problem with the printer and it will have to be professionally diagnosed or replaced.

Hope this was of some help to you.

George

Jun 01, 2008 | Lexmark JetPrinter X1185 All-In-One InkJet

1 Answer

Blank papers comes when the print given


D ear team, Blank papers comes when the print given. Meanwhile it shown the error msg is: LSU Hsync error cycle power pls give me the solution NHPC Ltd.

Feb 03, 2008 | Samsung ML-3051ND Laser Printer

2 Answers

Error msg 6A00


Just fixed mine. :-) I highlighted in yellow a small absorbtion pad that sits under the "home" position for the ink heads. This pad was tilted on its side and prevented mechanisms from moving. Once I put it back in its place, everything appears to be working. You might be able to reach this without taking the cover off, but it is tricky. See http://www.fixyourownprinter.com/forums/inkjet/37440 for some info on care with cover removal.

06e8dec.jpg

Jan 23, 2008 | Canon PIXMA iP6700D InkJet Photo Printer

Not finding what you are looking for?
Canon PIXMA  MP160 All-In-One InkJet Printer Logo

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96396 Answers

old marine
old marine

Level 3 Expert

1461 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...