Question about PC Desktops

1 Answer

From where can i download turbo c++ ide?

Please refer me a link o download urbo c++ ide.

Posted by on

  • Anonymous Mar 03, 2009

    from which website can i download turbo c++ ide

  • gsaf Mar 27, 2009

    pandi lun

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • PC Desktops Master
  • 13,433 Answers

Heres one for DOS

http://www.vetusware.com/download/Borland%20Turbo%20C++%203.0/?id=163

Year 1991 is this the one you are lookin for?

Posted on May 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Skimatice for hard drive connections


Schematic

The eMachines T6532 uses an MSI MS-7207 motherboard.
Also known as the KN8GM2-L,

http://www.msi.com/product/mb/K8NGM2-FID--IL--L.html

[ http://www.newegg.com/product/product.aspx?Item=N82E16813130041 ]

The MSI motherboard has provisions for using, EITHER an
IDE (PATA) harddrive, or a SATA harddrive. (Or more than one)

Two different technologies.
I will explain both, using an IDE (PATA) harddrive,
OR;
Using a SATA harddrive;

On the MSI Support page above, click on the Download tab.
(Overview / Specifications / Download / Support / etc)

In the drop down list click on - Manual

Language > English > 7.1MB > E7207v2.0.zip
Click on the blue E7207v2.0.zip

On the next page click on the country name nearest yours.
A small window will come up -
Opening E7207v2.0.zip

Make SURE there is a Green dot in the small circle, to the left of Save File.
IF not; Left-click in the small circle to the left of Save File.
Now go below in the small window, and click on OK

A small download window will come up. Allow the file to download ALL the way, then DOUBLE-click right on it.

In the next small window go to the far left, and click on -
Extract all files.

At the bottom of the next 3 small windows, click on -
Next, Next, and Finish.

In the last small window DOUBLE-click right on the file name.
(7207v2.0(G52-M7207X5) next to the red Adobe PDF icon)

There is the Motherboard Manual

The MS-7207 has two IDE slots;

IDE 1, which is Yellow in color, and close to the outside edge of the motherboard.
Should have IDE 1 silkscreened on the motherboard, below it.

IDE 2 is Yellow in color also, and right next to IDE 1.

(IDE 2 is in-between IDE 1 and the Ram Memory slots.
The Purple, Slot 4, ram memory slot to be specific. {DIMM 4 )

IDE 1 is used for an IDE harddrive.
IDE 2 is used for an IDE optical drive.

TWO IDE harddrives can be put on a single flat ribbon IDE cable,

http://en.wikipedia.org/wiki/File:ATA_cables.jpg

NOTE that there are two styles of IDE flat ribbon cables;
40-wire cable,
OR;
80-wire cable.

BOTH have 40 socket holes in their connectors.
(ONLY 39 are used, so one hole May, or May Not be blocked off)

How to connect to a 40-wire IDE cable, or an 80-wire IDE cable,

http://www.mikeshardware.com/howtos/howto_connect_ide_hd.html

An IDE cable usually has a Locating Lug on it's connectors, in the middle of the connector; and on one side,

http://en.wikipedia.org/wiki/File:PATA-cable.jpg

Here you see the Locating Lug as being two separate 'ridges'.
Some styles the Locating Lug is single block.

The motherboard connector has a matching Cutout on one side.
The Locating Lug lines up with the cutout when installing the cable.

The Harddrive, and optical drive (CD/DVD drive), will have a cutout on their circuit boards.

There are 40-pins. (Only 39 are used if so)
One of them is the number 1 pin.
The IDE cables are plugged into the motherboard, with number 1 pin lining up with number 1 wire, in the IDE cable.

Same when the IDE cable is plugged into a Harddrive, or optical drive.

IF, there is no Locating Lug on the IDE cable;
Look for the faint RED stripe, on the side of the IDE cable.
Number 1 wire is on the same side, as the faint Red stripe.

When plugging into a motherboard, Number 1 pin is on the Bottom.
The faint red stripe on the cable, goes towards the BOTTOM of the motherboard.
(Motherboard installed in computer case)

When plugging into a Harddrive, or optical drive; the faint red stripe ALWAYS goes toward the power cable,

http://www.playtool.com/pages/psuconnectors/connectors.html#peripheral

This shows you the Back of an IDE (PATA) harddrive, and the power cable used for it.
If -> No Locating Lug on IDE cable, the faint Red stripe goes towards the power cable.

This is a 4-pin standard Peripheral power cable.
Note when installing the rounded corners ALWAYS goes UP.

[This power cable is frequently, and erroneously; referred to as a 'Molex' power cable.
Molex was just the first manufacturer of the power cable CONNECTOR. Name STUCK.

Kind of like calling an adjustable open-end wrench, a 'Crescent wrench ]

A SATA power cable is used for a SATA harddrive, or SATA optical drive,

http://www.playtool.com/pages/psuconnectors/connectors.html#sata

There is an L-shape in the SATA power cable's connector.
It matches an L-shape on the Harddrive, or optical drive.

Between a SATA power cable's connector, and a SATA data cable's connector; a SATA power cable connector is the LARGER of the two.
A SATA power cable has 15-contact pins.
A SATA data cable has 7-contact pins.

A SATA power cable's connector may have a LOCK on it.
Usually a Tab, or 'bulb' type affair.
It is pressed down with the thumb when installing, or removing the SATA power cable.

This is a general example of a SATA data cable,

http://en.wikipedia.org/wiki/File:SATA_Data_Cable.jpg

Now you can see the L-shaped opening a little better, that both the SATA data cable have, and the SATA power cable, has.

In the photo the SATA data cable's connector, is a 90 degree bent Elbow.
This style of connector is usually used on the Harddrive, or on the optical drive.

A Straight connector style is usually used for the Motherboard.
However, you can use a SATA data cable, that has a Straight connector on both ends.

Looking at your motherboard, installed in a computer case; there are 2 SATA connectors on the motherboard.

(CAN, be up to FOUR)

I see one motherboard reference where they (2) are Orange in color, (Newegg), and the motherboard manual shows them (2) to be Purple in color.

They are located towards the Bottom/Right corner of the motherboard.
Above the CMOS battery.

The SATA connector that is closest to the Outside edge of the motherboard, is SATA1 (SATA 1)

The Harddrive plugs into SATA 1.

An optical drive that is SATA, will plug into the SATA2 connector.
To the Left of the SATA1 connector.

KNOW THIS;

DOES NOT MATTER, which SATA connector you plug the Harddrive, or optical drive; into.

The beauty of SATA, is that you can plug the Harddrive or optical drive into ANY SATA connector, (On ANY motherboard), and BIOS will find those devices.

BIOS looks FIRST, to see which drive has the Operating System on it. (Windows)
THAT, is the Harddrive.

After finding the drive with the O/S on it, then BIOS will find all the other drives. Removable, or not.

So there you have it. A lot of reading.
You need a power cable, and a data cable to the Harddrive.
Same thing for the optical drive/s.

To have me clarify anything I have stated above, please post in a Comment.

For additional questions please post in a Comment.
Regards,
joecoolvette

Apr 15, 2013 | E-Machines T6532 PC Desktop

1 Answer

Pavilion a1630n ide/atapi host controller


You need to go to the link below and select the operating system you need the driver for and then you need to download the "chipset" driver.

Link:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=3245027&

Jul 30, 2012 | HP Pavilion PC Desktops

1 Answer

Invalid configuration information-please run setup program. Performing automatic IDE configuration...... how to solve this problem.. tq..


Did you install a new hard drive, CD drive or DVD drive?
When a new drive is installed it needs to be configured in the BIOS. If so you need to go into the setup (BIOS) menu and then hold down the and keys and the press the and key to re detect newly installed IDE drives.
IDE (Integrated Drive Electronics) refers to the interface circuit that the motherbrd uses to communicate with your hard drive, CD drive or DVD drive.

Feb 17, 2011 | Dell Optiplex G240 (OPTIG240) PC Desktop

1 Answer

How to install an ata ide hard drive


See this link for installing an IDE hard drive:

http://freepctech.com/pc/001/installing_ide_devices.shtml

Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.

Thanks, Joe

Nov 11, 2010 | PC Desktops

1 Answer

I am getting a stop error that leads me to believe the MBR is messed up on my RAID drives. It may also be because the boot sector has become infected. Is there any way that I can set the system up to boot...


If you can install an IDE drive as a first boot drive and install Windows on this hard drive with the SATA RAID drives as the secondary drives, then you may be able to recover your data from the RAID drives.
You may be able to fix the MBR first before installing Windows.
To fix the MBR run the DOS command - fdisk /mbr
To download Hirens please click on this link, click on one of these links to download HIREN'S BOOTCD :-

http://www.hirensbootcd.net/
http://67.20.82.163/

Oct 13, 2010 | Dell Dimension E510 Dual Core 2.8 Ghz...

1 Answer

What drive is the dvd rom inserted. i'm trying to download turbo tax


The DVD-ROM drive is the same thing as the CD drive or optical drive, generally. It is near the top of the tower.

Download refers to getting something off the internet - if you have a DVD, you are trying to install it.

Apr 15, 2010 | HP Pavilion a400n (DQ173A#ABA) PC Desktop

1 Answer

Slave drive


If you are referring to creating a slave HDD, then it is not necessary - as this model utilizes SATA hard drives, there is no master / slave concept; it is in the order in which you connect the drives to the connectors on the motherboard. If your reference is to the Optical drives with IDE, then connect the slave drive to the middle connector in the IDE (flat ribbon) cable & ensure the jumpers on both the drives are set to Cable select (CS) - this would be at the rear end of the drive. Connect the IDE cable to the motherboard & the BIOS will automatically assign the drive connected to the end as master & the middle as slave.

Mar 16, 2010 | Dell OptiPlex 210L N (210LNDCELMIN) PC...

1 Answer

Raid 1 needed to replace single IDE disk


go to hp.ca you can download ide driver updates

Jan 12, 2010 | HP Pavilion a1220n (A1220NED904AA) PC...

3 Answers

I want to install a 2nd dvd burner. But I don't know how to hook it up. My new pc does not have the ribbons like my old one does.


If your 2nd DVD burner is on IDE interface, you may need to get an IDE to SATA cable. Please refer to the picture below as to how it looks like:

china_product_c20076614223772717_usb2_0_to_ide_sata_cable_convertor.jpg

Oct 29, 2009 | Compaq Presario 5000 PC Desktop

1 Answer

Maximum IDE HD size for HP d530 SFF (Bios 786B2 v1.11 07/10/2003)


no its not a hdd problem, its a mobo problem max u can use is 160 with that pc, what u can try is a bios upgrade and hopefull it helps

go here for the updates:

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=316715&lang=en&cc=us&prodTypeId=12454&prodSeriesId=316713&taskId=135

choose ur os like xp or vista

than download the updates

Jan 02, 2009 | HP Compaq d530 SFF PC Desktop

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...