Question about Hauppauge WinTV PVR2 (99016) Video Capture

2 Answers

Capture of the Composite Video Channel

Hello,

I installed the last Version 4.4 of WinTV V6 on Windows Vista Home Edition and the last MPEG-Decoders. I have a problem capturing the Composite Video Channel with the WinTV-PVR USB2 24xxx device. No audio is to hear and no picture is to see. Screen stays black. Any idea to solve this? None of the described solutions works (Primary, MPEG-Decoders ...).

Best regards

Pierre Falzone

Posted by on

  • 1 more comment 
  • qwarg May 10, 2008

    Problem was: Video-out Cable had a problem. Now it is OK and WinTV-PVR USB2 works fine.

  • Anonymous Mar 12, 2014

    How to remove the status bar ot the top of the screen while i`m watching a channel. This bar describes the features of the tv such as: HD, Mpeg etc? TELEFUNKEN

  • Anonymous Mar 12, 2014

    How to remove the status bar ot the top of the screen while i`m watching a channel. This bar describes the features of the tv such as: HD, Mpeg etc?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 91 Answers

You won't like this solution but it's the best.
Wipe off Vista and install XP with all the MS updates.
Vista is a nightmare due to a lack of a well overdue service pack.
Also it works with mostly just newer software and T.V PCI cards will soon be a thing of the past. If you want to keep Vista, I suggest you go and buy yourself a USB digital receiver for around £40.
If you want to edit analog video try visiting http://www.pinnaclesys.com

Regards

Phill.

Posted on May 08, 2008

  • Phillip Thorne
    Phillip Thorne May 11, 2008

    How were either of these answers inappropriate you ****? It's idiots like you that won't get help in the future. If it turned out to be the cable was faulty then your a complete **** as I assumed you would have at least the small amount of common sence to check that first. Plonker!

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,224 Answers

Did you get your rca jacks put in the right connectors and put sound settings where there to be

also vista might be having conflict of interests with your files if it worked before with older files it quite can be vista havin a hellava time adjusting
vista so far has been known to do that
and try this update your Codec's files this could help
if you dont know what Codecs is its your audio and video drivers

Posted on May 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is the sony mpeg encoder board used for and do I need it?


do you have a secondary sound card? if so then it shouldn't bother anything as long as you select the appropriate card in your configuration

Apr 26, 2012 | Sony VAIO RC210G (027242690530) PC Desktop

6 Answers

I have bought a cannon XH-A1 HDV camera but find i cannot capture scenes using Pinnacle Studio plus v9 could you please advise me on what is required, may be studio 11 plus for windows XP will solve this?


Hi there

Pinnacle Studio Plus V.9 can only be used for editing DV and not HDV however Pinnacle Studio Plus V.11 can be used to edit both DV and HDV.

Please remember to put a good rating on this post.

Keep us posted and thank you for using our service.
FixYa for all your troubleshooting needs.

Jun 27, 2008 | Cameras

1 Answer

I CAN NOT PLAY MUSIC USING MY MEDIA PLAY


windows media does not support all extensions. Below are the examples. if you have the right format and still you are not able to play then best option is to upgrade or reinstall media player. Windows Media Player 6.0 loadTOCNode(2, 'moreinformation');
  • Windows Media formats
    File name extensions: .asf, .asx, .avi, .wav, .wma, .wax, .wm, .wmv, .wvx
  • RealAudio and RealVideo (version 4.0 or earlier)
    File name extensions: .ra, .ram, .rm, .rmm
  • Moving Pictures Experts Group (MPEG)
    File name extensions: .mpg, .mpeg, .m1v, .mp2, .mpa, .mpe

    Note MPEG 2 requires third-party software or hardware decoders.
  • Musical Instrument Digital Interface (MIDI)
    File name extensions: .mid, .rmi
  • Apple QuickTime (version 2.0 or earlier)
    File name extensions: .mov
  • Macintosh AIFF Resource
    File name extensions: .aif, .aifc, .aiff
  • Intel Video File
    File name extensions: .ivf
  • UNIX
    File name extensions: .au, .snd
Windows Media Player 6.1, 6.2, 6.4, 7, 7.1, Windows Media Player for Windows XP, and Windows Media Player 9 Series loadTOCNode(2, 'moreinformation');
  • Windows Media formats
    File name extensions: .asf, .asx, .avi, .wav, .wax, .wma, .wm
  • Audio Visual Interleave
    File name extension: .avi
  • Moving Pictures Experts Group (MPEG)
    File name extensions: m3u, mp2v, .mpg, .mpeg, .m1v, .mp2, .mp3, .m3u, .mpa, .mpe, mpv2

    Note MPEG 2 requires third-party software or hardware decoders.
  • DVD Video
    File name extension: .vob

    Note DVD playback requires third-party software or hardware decoders and is supported only in Windows XP.
  • Musical Instrument Digital Interface (MIDI)
    File name extensions: .mid, midi, .rmi
  • Apple Macintosh AIFF Resource
    File name extensions: .aif, .aifc, .aiff
  • Sun Microsystems and NeXT
    File name extensions: .au, .snd
  • Intel Video File
    File name extensions: .ivf

    Note Intel Video File support requires the Intel Video 5.x codec.
  • Windows Media Player Skins
    File name extensions: .wmz, .wms
  • QuickTime Content
    File name extensions: .avi, .mov, .qt

    Note Windows Media Player can play back older forms of the QuickTime format only. For additional information, click the following article number to view the article in the Microsoft Knowledge Base: (http://support.microsoft.com/kb/316992/EN-US/ ) Windows Media Player Multimedia File Formats
  • Algebraic-Code-Excited Linear Prediction
  • UNIX
    File name extensions: .au, .snd
  • Macromedia Flash
    File name extension: .swf

Dec 10, 2010 | Gateway M350CS PC Notebook

1 Answer

Is that this card(canopus acedvio pro version) any problem with windows 7


MPN 770-10116-900

Adapter Type Video Capture
Interface with Host PCI
Video Input Composite Video • i.Link (IEEE1394)
Video Output Composite Video
Platform PC • Mac
Hey no problem....It is best for Video capture...the datails are this.... i still useing it.........
Technical Features

Audio Support Stereo

System Requirements

Operating System Apple MacOS 9.x or later • Microsoft Windows 2000• Microsoft Windows XP Home Edition • Microsoft Windows XP Professional

Warranty 3 Years

Included Accessories 1 x Firewire (IEEE1394) Cable • Composite to S-Video Cable

Nov 18, 2010 | Canopus ACEDVio/EDIUS Pro 3 Bundle...

1 Answer

MPEG VIO Driver Error photo explosion special edition 3.0


How to correct a Load MPEG VIO Driver Error in Windows Vista.

If you are experiencing this issue with Windows Vista, please follow these directions:

Note: These steps are only for Windows Vista. If you are experiencing the problem on Windows XP, please see the directions found here: KB Article 1469

1. Uninstall Photo Explosion 3.0.
2. Reinstall Photo Explosion 3.0.
3. Restart the computer.
4. Download the Vista update for Photo Explosion 3.0 from the following link:

http://www.novadevelopment.com/Support/Updates.aspx

Note: Please make sure you download the correct one for your version of Photo Explosion 3.0. If you have the Deluxe version, download the Deluxe update. If you have the regular version, download the non-Deluxe update.
5. Save the update to an easily accessible location, such as your Desktop.
6. Once downloaded, go to where the update was saved and double-click the update.
7. After installing the update, you should no longer experience this problem.

Note: It is extremely important that you do not run Photo Explosion until you have restarted the computer and installed the update. If you run the program before installing the update, you will need to start the steps over from the beginning.

This comes directly from the Nova FAQs. Hope this helps!

Jun 30, 2010 | Nova Development Photo Explosion Deluxe...

1 Answer

Help me..whats going on with windows xp home edition


When installing a new operating system, all file saved will be deleted. Since you've lost all data, you might as well format the entire drive, and then reinstall the vista inspirat thing. Then, download an Avast! anti virus form avast.com. Download the home version, which is free and scan the computer for any viruses. Delete every last one of the suckers.

Jul 03, 2008 | Microsoft Windows XP Home Edition

1 Answer

Is this the right product for me


Hello,

Yes, but make sure the model type is what is listed below although they should all be the same today as there are no standards war. For your PC you will need a video capture card unless your video card has it, chances are it doesn't. You would have an adapter already that came with your video card that has plugs coming out. There would be 5 or 6. If you don't go to tigerdirect.ca or newegg.com and do a search for "video capture card" Prices range from $50 and up. Get one with the best warranty is my advice and if you wish I will find one for you from a reputable card maker. Just ask me by commenting below. And if you have any questions about the details below just ask me by commenting back to me.

Regards,
Worldvet

SmartDisk Real-Time Video Producer (DPS-70000)

Adapter Type Video Capture
Interface with Host FireWire 400 (IEEE 1394)
Video Input S-Video • Composite Video
Video Output S-Video • Composite Video

Platform PC

Technical Features
Supported Digital Video Standards
AVI • MPEG-1 • DV • MPEG-2

Audio Support Included

Analog Video Format NTSC • PAL

Capture Resolution 720 x 480 • 720 x 576
System Requirements
Operating System MS Windows 2000 • MS Windows XP

Jun 04, 2008 | Zio Corporation CameraMate RealTime...

2 Answers

Hi8 to Computer for editing


I usbg-vx3.jpg






Color: Black Part No.USBG-VX3 VISTA COMPATIBLE USB Video Adapter USB 2.0 Audio/Video Grabber S-video& Composite
AUDIO AND VIDEO GRABBER FOR WINDOWS VISTA GrabBee X+ USB 2.0 Audio/Video Grabber New Generation USB2.0 Audio/Video grabber is the best ideal companion for your portable audio/video application. Real-time MPEG 1/2/4 recording make you have powerful video application on hand. GrabBeeX+ USB 2.0 A/V Grabber is the bridge between your computer and analog camera, VCR, camcorder or other video source. GrabBeeX+ USB 2.0 Video Grabber is small enough to fit in the palm of your hand and is ideal for both notebook and desktop computers. Applications : Video recording & editing Take photo Video email Security monitoring system Features : Small Wonder--Dimensions are (L)81mm x (W)30mm x (H)15mm Audio and video go though USB 2.0 bus (WinXP) to make best performance High speed USB 2.0 data transfer rate for best video recording Encoding MPEG 1 or MPEG 2 format directly use InstantMPEG Technology, Ideal formats for creating VCD or DVD movies Up to 25 fps motion capture capability at 720x576(PAL) & 30 fps at 720x480(NTSC) SnapShot function support Composite, S-Video analog input, NTSC, PAL and SECAM multi system support Recording period setup Composite, S-Video analog input, NTSC, PAL and SECAM multi system support Support Brightness, Contrast, Hue, Saturation, Sharpness control Powerful video editing function include Motion Video Special Effects/ Title Effects/ Picture-in- Picture Effects/ Slow & ast Motion Video Effects/ background music/?color background/ Transitional Effects Plug & Play Low power consumption. Ideal for portable computer too No Battery---No need to install batteries or run off the wall adapter
  • Specifications : Video input : One RCA composite, One S-Video.
  • Video system : NTSC, PAL and SECAM multi system support Audio input : in WinXP, go through USB; in Win2000, go through sound card
  • Motion capture : AVI format from 160x120 to 720x576 resolution MPG format from 320x240 to 720x576 resolution Still image capture : BMP/JPG/TIF/PCX/TGA file format
  • Performance : Up to 25 fps at 720x576 for PAL, 30fps at 720x480 for NTSC Power Source : 5VDC,300mA(max) through USB port Minimum System
  • Requirements : USB 2.0 equipped computer Pentium 4 1G or above 128MB of RAM Windows 2000/XP Sound card
  • Package Contents :
  • GrabBeeX+ USB 2.0 Audio/Video Grabber
  • GrabBeeX+ drivers CD
  • Ulead VideoStudio editing software
  • User's manual
    I have heard this works, going to try one today, I have tried EVERYTHING else, downloading drivers, diffferent programs, firewire cords, so I think this will work, when I googled our specific camcorder, this matches, also, some people are selling the exact sony camcorder on ebay with this included, stating they have used it to connect to their pc. Hope this helps.

  • May 06, 2008 | Sony Handycam CCD-TRV608 Camcorder

    1 Answer

    No color from VHS on DVD/VHS player


    There may be an input selection between Composite and S-Video that needs to be toggled in your Hauppauge software.

    Your Hauppauge card may also be in the wrong signal format mode (NTSC or PAL). Your source device and your Hauppauge card need to be in the same mode (both NTSC or both PAL) for the capture to work properly.

    If your NV-VP33 is a SCART output, then you may need to check your SCART adapter and your device as not all devices output both S-Video (Y/C - two signals) and Composite (CVBS - one signal) type signals.

    If your SCART adapter has both Composite and S-Video outputs, try the other one.

    And finally... if you're playing an NTSC tape/DVD in a PAL player, it doesn't mean the output is true NTSC 3.58. Most times it's NTSC 4.43 which is OK for TVs, but NOT okay for video capture devices. Video capture devices need true NTSC 3.58 to sync the color carrier properly.

    Apr 29, 2008 | Hauppauge WinTV HVR-1600 - ATSC HDTV...

    1 Answer

    DVRMS recordings


    Hello there
    Well, lowering a bit the settings may solve problems, but decoders too. a new version of DX10 is on site, depending if you use Vista, o XP.

    Dec 06, 2007 | HP Media Center m7060n PC Desktop

    Not finding what you are looking for?
    Hauppauge WinTV PVR2 (99016) Video Capture Logo

    218 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hauppauge Televison & Video Experts

    Jazz Boyce
    Jazz Boyce

    Level 1 Expert

    728 Answers

    Luc Francoeur
    Luc Francoeur

    Level 2 Expert

    102 Answers

    Brian Sullivan
    Brian Sullivan

    Level 3 Expert

    27725 Answers

    Are you a Hauppauge Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...