Question about Vizio High Definition Sound Bar

2 Answers

Looking for remote codes for vizio sound bar and comcast remote

Posted by on

  • kris Jan 22, 2012

    Can some one please help me here. When I followed these steps I did not get two blinks at the end of each assigned code series. Furthermore, it did some thing to my remote where the vilume up button is turning the vizion soundbar off all together.
    - I am also unsure of the sequence.....to double check what seems otherwise obvious,
    press AUX, then press and hold setup until it blinks twice, then press the 994, then the code, then setup again. (are we holding setup down like we had to the first time around and the start of the sequence?)
    it seems pretty straight forward but as you can see, its anything but. If anyone would elaborate a step by step that is exact it would be greatly appreciated. I have been messing with this remote for hours and have pretty much given up unless anyone cares to revive me with better instructions. Thanks ahead of time.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

After much research, here is a step-by-step for getting your Vizio Soundbar to work with the Comcast remote using EFC codes (mine is the newer charcoal grey one, works great!)
Aux - Setup (2 blinks) - 11144 (2 blinks)Aux - Setup (2 blinks) - 994 - Setup - 00169 - Vol Up - Should get 2 blinksAux - Setup (2 blinks) - 994 - Setup - 00168 - Vol Down - Should get 2 blinksAux - Setup (2 blinks) - 994 - Setup - 00037 - Mute - Should get 2 blinksAux - Setup (2 blinks) - 994 - Setup - 00165 - Power - Should get 2 blinksAux - Setup (2 blinks) - 994 - Setup - 00164 - Input - Should get 2 blinks
These are optional, I didn't use them:Aux - Setup (2 blinks) - 994 - Setup - 00036 - <button to use for TVOL> - Should get 2 blinksAux - Setup (2 blinks) - 994 - Setup - 00101 - <button to use for TSHD> - Should get 2 blinks
Then set the volume control on the remote and other settings according to the Remote's manual.
ENJOY!! Hope this helps someone...

Posted on Nov 18, 2011

  • Rick M Nov 18, 2011

    Here it is in a more readable form... sorry :/

    Aux - Setup (2 blinks) - 11144 (2 blinks)
    Aux - Setup (2 blinks) - 994 - Setup - 00169 - Vol Up - Should get 2 blinks
    Aux - Setup (2 blinks) - 994 - Setup - 00168 - Vol Down - Should get 2 blinks
    Aux - Setup (2 blinks) - 994 - Setup - 00037 - Mute - Should get 2 blinks
    Aux - Setup (2 blinks) - 994 - Setup - 00165 - Power - Should get 2 blinks
    Aux - Setup (2 blinks) - 994 - Setup - 00164 - Input - Should get 2 blinks

    These are optional, I didn't use them:
    Aux - Setup (2 blinks) - 994 - Setup - 00036 -

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 3 Answers

Code 10178 works with Comcast's red OK/Select button remote for the Visio Sound Bar. Here is what I did.

1. Press AUX and wait for the blink.
2. Press and hold Setup and wait for two blinks.
3. Enter 10178.
4. Press Vol t key.
5. Press AUX and wait for the blink.
6. Press Setup and wait for blink.

Now test you remote using your up and down volumn controls. Note: I turned my TV volumn down to 0 so I can only hear my Sound Box. I hope that this helps.

Posted on Dec 27, 2015

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: looking for remote codes for vizio sound bar and

After much research, here is a step-by-step for getting your Vizio Soundbar to work with the Comcast remote using EFC codes (mine is the newer charcoal grey one, works great!)
Aux - Setup (2 blinks) - 11144 (2 blinks)Aux - Setup (2 blinks) - 994 - Setup - 00169 - Vol Up - Should get 2 blinksAux - Setup (2 blinks) - 994 - Setup - 00168 - Vol Down - Should get 2 blinksAux - Setup (2 blinks) - 994 - Setup - 00037 - Mute - Should get 2 blinksAux - Setup (2 blinks) - 994 - Setup - 00165 - Power - Should get 2 blinksAux - Setup (2 blinks) - 994 - Setup - 00164 - Input - Should get 2 blinks
These are optional, I didn't use them:Aux - Setup (2 blinks) - 994 - Setup - 00036 - <button to use for TVOL> - Should get 2 blinksAux - Setup (2 blinks) - 994 - Setup - 00101 - <button to use for TSHD> - Should get 2 blinks
Then set the volume control on the remote and other settings according to the Remote's manual.
ENJOY!! Hope this helps someone...

Posted on Nov 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I find a comcast remote code?


use universal remote pairing feature on tv .

Sep 04, 2014 | Craig Electronics CHT912 Bluetooth TV...

1 Answer

Need 3 digit code for vizio vsb200 audio bar for a clikr-5 UR5U-8780L-TWM remote


There is no listed 3 digit code. You will have to do a code search. Press and hold the Ok and Aux button for 3 seconds. You will have to press the CH+ or CH- (does not matter which) for upwards of 400 times but the code is in there somewhere between 290 and higher, I lost count. Here are two tips. Move the cable box out of site of the remote and expect the TV to turn off when it hits its code. This will make you think you have found the code as the sound will go off. Don't fall for it. Look at the light on the sound bar only. Once the TV turns off you will need to have it;s remote handy to turn it back on so you will hear the sound again.

Once you pass 290 or so go slow and don't miss the light going out on the sound bar or you will have to do it all over again.

Once you turn the sound bar off press the AUX button again to lock in the code.

It's a pain but the code for Vizio sound bars is in there, don't let them tell you it's not. Took me about 7 tries to find the sequence and make the mistakes but my Vizio bar is now Programmed to the Cliker-5 and works fine. Good Luck.

May 19, 2011 | Televison & Video

1 Answer

I have a vizio t.v. & remote the dogs ate our other remote and now we cannot find the numbers to program our vizio remote to our other components


what componet are u trying to hook it to. We have comcast cable and a universal remote and they keep the codes online for all tvs depending on what you use for tv services you should be ale to search that website for comcast just google comcast remote codes it will show a few diff remote styles and once u choose one it will let you download a manual with instructions and codes for all kinds of devices and options

Feb 16, 2011 | Vizio Televison & Video

2 Answers

Hey I'm trying to program my Comcast remote to control a Vizio VHT510 sound bar sound system bought at Costco. Any ideas if there is a way do do this?


After much research, here is a step-by-step for getting your Vizio Soundbar to work with the Comcast remote using EFC codes (mine is the newer charcoal grey one, works great!)


Aux - Setup (2 blinks) - 11144 (2 blinks)

Aux - Setup (2 blinks) - 994 - Setup - 00169 - Vol Up - Should get 2 blinks

Aux - Setup (2 blinks) - 994 - Setup - 00168 - Vol Down - Should get 2 blinks

Aux - Setup (2 blinks) - 994 - Setup - 00037 - Mute - Should get 2 blinks

Aux - Setup (2 blinks) - 994 - Setup - 00165 - Power - Should get 2 blinks

Aux - Setup (2 blinks) - 994 - Setup - 00164 - Input - Should get 2 blinks


These are optional, I didn't use them:

Aux - Setup (2 blinks) - 994 - Setup - 00036 - <button to use for TVOL> - Should get 2 blinks

Aux - Setup (2 blinks) - 994 - Setup - 00101 - <button to use for TSHD> - Should get 2 blinks


Then set the volume control on the remote and other settings according to the Remote's manual.


ENJOY!! Hope this helps someone...

Dec 14, 2010 | Vizio VX37L Television

2 Answers

I just bought a vizio sound bar and am trying to program it to work with my mitsubishi tv remote. I cant seem to find any codes for it. would u happen to know where i could find them at?


I found code 1517 for the Vizio sound bar for Comcast and a universal remote- I don't know if codes for your remote are 4 or 5 digit codes, but this is the only one I found that works. Hope it helps.

Nov 26, 2010 | Vizio Audio Players & Recorders

2 Answers

I have a Vizio 210 soundbar and the remote control is junk! I want the code the woeks on my Comcast universal remote control.


After much research, here is a step-by-step for getting your Vizio Soundbar to work with the Comcast remote using EFC codes (mine is the newer charcoal grey one, works great!)


Aux - Setup (2 blinks) - 11144 (2 blinks)

Aux - Setup (2 blinks) - 994 - Setup - 00169 - Vol Up - Should get 2 blinks

Aux - Setup (2 blinks) - 994 - Setup - 00168 - Vol Down - Should get 2 blinks

Aux - Setup (2 blinks) - 994 - Setup - 00037 - Mute - Should get 2 blinks

Aux - Setup (2 blinks) - 994 - Setup - 00165 - Power - Should get 2 blinks

Aux - Setup (2 blinks) - 994 - Setup - 00164 - Input - Should get 2 blinks


These are optional, I didn't use them:

Aux - Setup (2 blinks) - 994 - Setup - 00036 - <button to use for TVOL> - Should get 2 blinks

Aux - Setup (2 blinks) - 994 - Setup - 00101 - <button to use for TSHD> - Should get 2 blinks


Then set the volume control on the remote and other settings according to the Remote's manual.


ENJOY!! Hope this helps someone...

Nov 14, 2010 | Vizio High Definition Sound Bar

1 Answer

I am looking for the code for my Visio Sound Bar to program into my Dish Network remote to the AUX button. Has anyone talked with Visio Support to get this code? Thanks.


ronwright22

I have provided a link for you to Vizio's Website. The information below is for a VSB210WS sound bar. I would go to this link and research your model number and look for the code. You may try the code on this screen to see if it will work. I have also provided a link with instructions on programming your DISH remote to other components.

Vizio Website:

http://www.vizio.com/vsb210ws.html
This is the VSB210WS sound bar.

Programming a Universal Remote to operate the HD Sound Bar System If you own a VIZIO TV with a Universal Remote that uses a 5-digit programming code, you may program a device button with code 31517. This will map the Universal Remote button to operate the HD Sound Bar System as follows: Pictured at right is the VIZIO VUR8P Universal Learning remote.

Ray Calo
DISH Network

Nov 09, 2010 | DISH Network IR Remote Control

4 Answers

Looking for remote codes for vizio sound bar and comcast remote


I have a vizio universal remote and the code that works the vizio sound bar is the first one listed under audio/vizio 0660

Oct 16, 2009 | Televison & Video

Not finding what you are looking for?
Vizio High Definition Sound Bar Logo

6,134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vizio Audio Players & Recorders Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Cindy Wells

Level 3 Expert

5187 Answers

Are you a Vizio Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...