Question about Computers & Internet

4 Answers

Trouble with logging in on my account

I had tried to log on the yahoo mail,but i cannot, for 2 months consecutively. i do clear my browse caches and cookies but its still the same issue. my e-mail address ended with "yahoo.co.uk" please help me to regain my e-mail address and to read all my messages in my inbox. what can i do?

Posted by on

  • 7 more comments 
  • ping_zi_mm Sep 12, 2008

    I have trouble in logging in Yahoo email from yesterday. Please help out with the problem. Many thanks.

  • franchonh Sep 26, 2008

    how do you fix this

  • Anonymous Oct 01, 2008

    can't log on to yahoo mail.

  • Anonymous Oct 21, 2008

    I cannot log into my yahoo account

  • Anonymous Oct 25, 2008

    i cant log on and excess my emails

  • Anonymous Oct 25, 2008

    i can log on my accnt on yahoo on my one laptop but not on the other any1 kno y?

  • no email Nov 04, 2008

    I am unable to access yahoo email on my laptop but can access it from other computers. Just wondering if it is the new email set up and it was not installed into my computer properly?

  • bijju Nov 17, 2008

    i have trouble logging yahoo.com

  • Henru Mentz
    Henru Mentz May 11, 2010

    hi funy

    what is your email adres and password currently set to?

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I cant log into my email.... i can log into my yahoo accout but when i click on the mail it will not let me into the email tab

Posted on Nov 21, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have been trying to log on to my yahoo mail, but I can't. I keep getting a "Loading" message but nothing happens.

Posted on Nov 12, 2008

  • Rosie281 Nov 12, 2008

    I have two different email address, and I am able to log into the other but not my rosie_alvarez910@yahoo.com

×

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 39 Answers

Are you able to access your email on any other computer? What happens when you try to log in?

Posted on May 08, 2008

Hi,
go to yahoo.com and in the support section choose "forgot password"

Posted on May 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is poweredge 1800 display led connector


http://www.dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/Print?he Embedded System Management (ESM) log - also called System Event Log (SEL) or hardware log - reports potential hardware problems in Dell PowerEdge servers. Sometimes, simply turning off the server and disconnecting it from the electrical outlet will remove the error message. Wait approximately 10 seconds, and then reconnect the power cable and restart the server.

Other times, you will need to clear the ESM log to remove the error message. For instance, error code SEL FULLindicates that you will need to clear the ESM log. (You will lose the server's event history.) There are different ways to clear the ESM log.

To use DSET to Clear the ESM Log
  1. Download and open the DSET utility.
  2. Click the plus (+) next to System, and then click the plus (+) next to Logs.
  3. Click ESM to highlight it.
  4. Click Clear ESM Log located in the upper-right corner of the page.
To use OpenManage Server Administrator (OMSA) to clear the ESM log
  1. Start OpenManage Server Administrator (OMSA).
  2. Log in to OMSA by entering your username and password, and then press Enter.
  3. Click the Logs tab, and then click Hardware.
  4. Click Clear Log located next to Options.
To use Dell IT Assistant to clear the ESM log
  1. Start IT Assistant.
  2. From the middle System Tree bar, select your server by clicking it.
  3. Click the Logs tab, and then click Clear Log in the upper-right corner of the page.
Find your Dell PowerEdge server model in the chart below for other ways to clear the ESM log:

PowerEdge server model How to clear the ESM log 2300, 2400, 2450, 2500, 2500SC, 2550, 4300, 4350, 4400, 6300, 6350, 6400, 6450
Use the Log2Txt.exe utility to clear the ESM log:
  1. Start your server to the Log2Txt utility.
  2. When you see the ESM Log main menu appear, press 2 on your keyboard to select Clear ESM log.
  3. When the ESM Log main menu reappears, press 5on your keyboard to exit the utility.
1650, 1850, 1800, 2600, 2650, 2800, 4600, 6600, 6650, 7150, 6800, 6850, R900
Use the DRAC or ERA to clear the ESM log:
  1. Type the IP address of the Remote Access Controller (RAC) in the web browser address bar, and then press Enter.
  2. Log in to the RAC.
  3. Click the Logs tab, and then click Hardware.
  4. Click Clear Logs located in the upper-right corner of the page.
1850, 2800, 2850, 6800, 6850
Use the program BMCCFG.exe to clear the ESM logs:
  1. Download and extract the Dell OpenManage Deployment Toolkit here.
  2. Go to x:\Dell\Toolkit\Tools, where x is your primary hard disk drive.
  3. Copy the file BMCCFG.exe to a bootable floppy disk.
  4. Start the server from the bootable floppy disk.
  5. At the command prompt, type bmcc - clearsel, and then press Enter.
    The message "Clearing SEL" will display while the log clears.
1950, 2900, 2950, DP500, DP600, NF500, NF600
Use the BMC/BIOS to clear the ESM log:
  1. To open the BMC menu, press the Control + Ekeys during POST.
  2. From the list, select System Event Log, and then press Enter.
  3. Select Clear System Event Log, and then pressEnter.
=8590&doclang=EN

Jun 09, 2014 | Dell PowerEdge 1800 Server

Tip

Understanding windows account lockups


Common Causes for Account Lockouts

This section describes some of the common causes for account lockouts The common troubleshooting steps and resolutions for account lockouts are also described in this section.

To avoid false lockouts, check each computer on which a lockout occurred for the following behaviors:

* Programs: Many programs cache credentials or keep active threads that retain the credentials after a user changes their password.

* Service accounts: Service account passwords are cached by the service control manager on member computers that use the account as well as domain controllers. If you reset the password for a service account and you do not reset the password in the service control manager, account lockouts for the service account occur. This is because the computers that use this account typically retry logon authentication by using the previous password. To determine whether this is occurring, look for a pattern in the Netlogon log files and in the event log files on member computers. You can then configure the service control manager to use the new password and avoid future account lockouts.

* Bad Password Threshold is set too low: This is one of the most common misconfiguration issues. Many companies set the Bad Password Threshold registry value to a value lower than the default value of 10. If you set this value too low, false lockouts occur when programs automatically retry passwords that are not valid. Microsoft recommends that you leave this value at its default value of 10. For more information, see "Choosing Account Lockout Settings for Your Deployment" in this document.

* User logging on to multiple computers: A user may log onto multiple computers at one time. Programs that are running on those computers may access network resources with the user credentials of that user who is currently logged on. If the user changes their password on one of the computers, programs that are running on the other computers may continue to use the original password. Because those programs authenticate when they request access to network resources, the old password continues to be used and the users account becomes locked out. To ensure that this behavior does not occur, users should log off of all computers, change the password from a single location, and then log off and back on.

noteNote
Computers running Windows XP or a member of the Windows Server 2003 family automatically detect when the users password has changed and prompt the user to lock and unlock the computer to obtain the current password. No logon and logoff is required for users using these computers.

* Stored user names and passwords retain redundant credentials: If any of the saved credentials are the same as the logon credential, you should delete those credentials. The credentials are redundant because Windows tries the logon credentials when explicit credentials are not found. To delete logon credentials, use the Stored User Names and Passwords tool. For more information about Stored User Names and Passwords, see online help in Windows XP and the Windows Server 2003 family.

noteNote
Computers that are running Windows 95, Windows 98, or Windows Millennium Edition do not have a Stored User Names and Passwords file. Instead, you should delete the user's .pwl file. This file is named Username.pwl, where Username is the user's logon name. The file is stored in the Systemroot folder.

* Scheduled tasks: Scheduled processes may be configured to using credentials that have expired.

* Persistent drive mappings: Persistent drives may have been established with credentials that subsequently expired. If the user types explicit credentials when they try to connect to a share, the credential is not persistent unless it is explicitly saved by Stored User Names and Passwords. Every time that the user logs off the network, logs on to the network, or restarts the computer, the authentication attempt fails when Windows attempts to restore the connection because there are no stored credentials. To avoid this behavior, configure net use so that is does not make persistent connections. To do this, at a command prompt, type net use /persistent:no. Alternately, to ensure current credentials are used for persistent drives, disconnect and reconnect the persistent drive.

* Active Directory replication: User properties must replicate between domain controllers to ensure that account lockout information is processed properly. You should verify that proper Active Directory replication is occurring.

* Disconnected Terminal Server sessions: Disconnected Terminal Server sessions may be running a process that accesses network resources with outdated authentication information. A disconnected session can have the same effect as a user with multiple interactive logons and cause account lockout by using the outdated credentials. The only difference between a disconnected session and a user who is logged onto multiple computers is that the source of the lockout comes from a single computer that is running Terminal Services.

* Service accounts: By default, most computer services are configured to start in the security context of the Local System account. However, you can manually configure a service to use a specific user account and password. If you configure a service to start with a specific user account and that accounts password is changed, the service logon property must be updated with the new password or that service may lock out the account.

noteNote
You can use the System Information tool to create a list of services and the accounts that were used to start them. To start the System Information tool, click Start, click Run, type winmsd, and then click OK.

Other Potential Issues

Some additional considerations regarding account lockout are described in the following sections.
Account Lockout for Remote Connections

The account lockout feature that is discussed in this paper is independent of the account lockout feature for remote connections, such as in the Routing and Remote Access service and Microsoft Internet Information Services (IIS). These services and programs may provide their own unrelated account lockout features.
Internet Information Services

By default, IIS uses a token-caching mechanism that locally caches user account authentication information. If lockouts are limited to users who try to gain access to Exchange mailboxes through Outlook Web Access and IIS, you can resolve the lockout by resetting the IIS token cache. For more information, see "Mailbox Access via OWA Depends on IIS Token Cache" in the Microsoft Knowledge Base.
MSN Messenger and Microsoft Outlook

If a user changes their domain password through Microsoft Outlook and the computer is running MSN Messenger, the client may become locked out.

In this case, since the user has multiple devices connected to the exchange at given time , if he changes the password without disconnecting the other deivices. The account would get locked. You can inform him disconnect all the devices from the exchange except for one machine to change the paswword and then reconnect other devices with new creditentials.


Thanks
Proton

on May 29, 2010 | Computers & Internet

1 Answer

Power is 2950 i912 sel full


Namrata_stha,

The I912 error is referring to the System Event Log is full of events and because of this is unable to log anymore. You must clear the log in order for the Server Management controller to log any more events. Now depending on the OS installed there are different ways to clear it. If Windows Server 2k8 you would use this command - wevtutil el ' foreach { wevtutil cl $_ }
Where with Server 2003 you can go tot he Event viewer and clear it.

Let me know if this helps.

Feb 04, 2014 | Dell PowerEdge Computers & Internet

1 Answer

Howto clear log on server ibm


Hi,
Server is model is not mentioned.

You can clear logs by this way..
1: Get into BIOS and there you could see server logs. Clear those logs
2: Get into IMM and you can find logs there. Clear those logs (This is applicable to servers with IMM and Uefi firmwares)
3: Get into BIOS and find out IPMI logs. Its under Advanced settings.
Clear those (This is applicable for older x series machines with BIOS firmwares)

Thanks

Nov 21, 2012 | IBM xSeries Computers & Internet

1 Answer

Sel full 1912 error


Hello,

You will get the "Sel Full 1912 error" on your server when the system event log is full and unable to record further events. You must clear the event log before the error will cancel. Boot your system into the BIOS/CMOS, locate the system logs and select clear log, reboot your system. Once the system is back up, I would go into the admin task folder and make sure the logs are clear there as well.

Good Luck.

Please rate my solutions here on FixYa.com

Jan 01, 2012 | Dell PowerEdge 2950 (becwfk1_6) Server

1 Answer

Everytime I try logging into facebook it tells me that the page is temporarily unavailable and to try again later or that it might be a network problem, but all other websites are working fine. What can I...


Sometimes, facebook do maintenance for their servers and you'll experience that thing. But usually it doesn't take more than one day.

Is it a home pc where you're trying to logon into? Or is it an office computer? If it is an office computer, your network admin might blocked the website.

You can also try clearing your cache. For firefox, click tools, clear recent history and clear everything. For internet explorer, tools - internet options - delete - and delete everything. After this, try browsing facebook.

If it does not work, you can try other browser like google chrome which you can download for free at http://www.google.com/chrome

Or, you can try changing your DNS.
- Click start, right-click my network places then click properties
- Right click the local area connection you are using
- Double click internet protocol
- Change the preferred dns server to 8.8.8.8 and the alternate dns server to 8.8.4.4
- click ok, then ok
- try browsing

Good luck!

May 31, 2010 | Computers & Internet

1 Answer

Can i get may e mails from in.com to my pop account


Possibly! I do this with my yahoo account into outlook Express using the following:

Open Outlook Express
  1. From the Tools menu, choose Accounts.
  2. Select the Mail tab.
  3. Click the Add button.
  4. From the Add menu, click Mail.
  5. In the text box labelled Display Name, type your name and click Next.
  6. In the Email Address and the reply address box , type your in.com mail address (be sure to include @in.com) and click Next.
  7. Under My incoming mail server is a... select POP3.
  8. Type POP.mail.in.com in the Incoming Mail (POP3, IMAP4, or HTTP) Server box.
  9. Type smtp.mail.in.com in the Outgoing Mail (SMTP) Server box. Click Next.
  10. In the Account Name box, type your in.com Mail ID (your email address without the @in.com).
  11. In the Password box, type your in.com mail password.
  12. If you want Outlook Express to remember your password, check the Remember password box.
  13. Do not check the boxes labelled Log on using Secure...
  14. Click Next.
  15. Click Finish.
Important: Most SMTP servers require authentication. To turn this setting on:
  1. From the Tools menu, choose Accounts.
  2. Select the Mail tab.
  3. Double-click the account labelled POP.mail.in.com
  4. Select the Servers tab.
  5. Check the box next to My Server Requires Authentication.
  6. Click OK.
To control deletion of messages from the in.com mail server:
  1. From the Tools menu, choose Accounts.
  2. Select the Mail tab.
  3. Double-click the account labelled POP.mail.in.com.
  4. Select the Advanced tab.
  5. In the Delivery section at the bottom of the window, check Leave a copy of messages on server if you want to save your in.com mail messages on the in.com mail server as well as on your local computer. Do not check this box if you want your messages to be deleted from the in.com mail server once you have received them in Outlook Express. If you want to access your email from both the Outlook Express client and the in.com web based client then you need to leave a copy of the mail on the server.
Please let me know if this helps!

Feb 21, 2009 | Computers & Internet

1 Answer

02A2: BMC System Event Log(SEL) Full


In HP prolliant server sets, setup also logs system events. This error is due to that log. Enter setup, trace log and clear all events.

Jan 28, 2009 | HP Compaq ProLiant ML110 G4 Server

1 Answer

Yahoo mail log in


If your personal info is not correct for the password recovery process, then there is no way that you can recover this password.  You will have to create a new account :(

Oct 31, 2008 | Computers & Internet

1 Answer

Log in error 81003005


Here's how I solve it:
1. Open your Internet Explorer
2. Go to Tools > Internet Options then click the Connections tab
3.Click the LAN Settings button and a new dialog box will open
4. At the new dialog box, look for the Proxy server checkbox, if this is checked, uncheck it.
5. Then your done, click OK button for the dialog boxes.
6. Try logging in to your Yahoo Messenger account.

Oct 18, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

kakima

Level 3 Expert

98694 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...