After printing documents successfully, i sent a further document to print and received Print Mode Error message. Now printer won't print anything. I think the document which caused the problem was marked as a read only document which may have caused the problem but i'm not sure. Help anyone?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I have an HP 1350 all in one printer/scanner. It was printing fine until I wanted to scan a document. I pressed the scan button and now its stuck there. I can't get it out of scanning. I tried turning it off, unpluging and replugging. Can you help me.
1. Check that you are using the latest print driver - from kyocera website. 2. If the issue is when you print pdf files then make sure you set the printer in KPDL Auto mode - check the print driver settings about this and the printer menu. 3.You may check if you have the latest firmware installed within the printer - print a service status page (Menu->Others->Service).
This sounds like an issue with your web browser. Which web browser are you using? Do you get any error message when you print? Also, when you print, make sure it is printing to the printer you think you have set up. The web browser will allow you to print to a different printer, then remember those settings.
I assume the print driver is on the server and shared. I would start there. I would think someone changed the default setting on that driver. Go to printing preferences, job tab, and see how it is set.
Or re-install the print driver and start over.
Of course, on any problem, Kyocera will always ask you if you have the latest software installed on the machine.