Question about HP PSC 1610 All-In-One InkJet Printer

1 Answer

Shiki my 1610 printer will do print test page but it wont print anything else, The icon comes up but nothing happens, Plz help me

Posted by on

  • Anonymous May 08, 2008

    printer indicates ready,but it does not print . the printer gives a message the printer is not aligned

  • shikisan May 09, 2008

    So Sorry but nothing is printing off the internet. thankyou so very much for your help.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 51 Answers

I am trying to do this from memory as I don't have that model in front of me. turn the printer on. then while the printer is on unplug the power lead (don't turn the printer off first)
hold the OK and cancel buttons and plug the power supply back in. keep holding the buttons until the printer powers off. release the buttons, unplug the power lead and after 10 seconds replug in the lead and and switch the printer on.
this is an NVM reset whcih should clear any "hangs" in the printer.
Let me know!

Posted on May 08, 2008

  • Fred Fisher May 09, 2008

    If it is printing fine from your computer (documents etc) then it sounds like software rather than hardware. What happens if you save an internet page to your computer and then try to print?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It has ink and it has no problem lights on but it wont print anything


anything come on the monitor when you print ?
wont you to try print test page..... and see what the happen ?
if it s nothing, open the document print... and what the status ?
if you use Windows 7, there is usually came on a massage of information to resolve ?

Jun 06, 2011 | Epson Stylus C80 InkJet Printer

1 Answer

Color image or text will print but nothing black will


Please reseat your blackcartrige of the Printer , if it still does not work , get it replaced.

Hope this Help.
Cheers!!!!

Jul 16, 2009 | Epson Stylus CX6000 All-In-One InkJet...

1 Answer

HP PSC 1610 All-in-One not printing anything including test page


try this.. i got the same problem before.. and the main problem is the NO MECH MODE.. try pressing the setup button then take the plug out of your printer.. (still pressing the setup button) and put the plug back.. and it will remove the no mech mode.. then you could print like before.. i hope this helps

Jun 15, 2009 | HP PSC 1610 All-In-One InkJet Printer

1 Answer

Hp psc 1610 all in one printer wont print


Normal 0 Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud


Jan 26, 2009 | HP PSC 1610 All-In-One InkJet Printer

1 Answer

Printer installed & ready but wont print


found solution: driver software had an error while installing & only installed half the proper software. i had to uninstall the lexmark 5200 serious software completely & download it again from the lexmark website.
i talked to the lexmark customer service live chat line on their website & found out what the problem was. they are very helpful, i highly recommend using it if you have a problem with your lexmark product!

pretty simple solution, its just a little time consuming.

Nov 22, 2008 | Lexmark X5250 All-In-One InkJet Printer

1 Answer

Plz help me


do an nvm reset. When the printer is on, pull out the power cord. Hold OK and cancel and reinsert the power cord. When the scree goes blank, release the buttons and unplug the power cord. After 10 seconds, reinsert the power cord and start up. That might clear the problem

May 09, 2008 | HP PSC 1610 All-In-One InkJet Printer

1 Answer

HP 1610 prints color blocks all over a black and white page.


You are lucky you can print ANYTHING! My unit has NEVER worked (3 years) due to a hardware defect of HP. I downloaded patches, cleaned/replaced cartridges, etc.
Spoke to HP last nite-Was told printer was junk-they don't carry it or any parts to fix it anymore!! I was told to replace it!

Apr 20, 2008 | HP PSC 1610 All-In-One InkJet Printer

1 Answer

My hp 1610 all in one


Is the color missing on the calibration page? Maybe some color or cartridge is empty and the printer can not calibrate... Without calibration no work !!!

Sep 04, 2007 | HP PSC 1610 All-In-One InkJet Printer

1 Answer

HP LASERJET 1100 WONT PRINT


go to Start, Settings, Control panel, printers and faxes is your printer there? is there a checkmark? no, then right click and set as default, put your mouse over it does it say Ready? no, then change cable.

 

send test page, it should print, if not the USB or Parrallel input of your printer has a problem.

Aug 14, 2007 | HP LaserJet 1100 Printer

Not finding what you are looking for?
HP PSC 1610 All-In-One InkJet Printer Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96333 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...