Question about Kitchen Ranges

1 Answer

Hi I have a Fagor Innova Under counter washer-dryer. Tts about 3 years old but barely used. I have just moved into the flat and cant get it to work. There is water in the drum and it wont move. i tried various programmes but it never drains. Also there is no instruction manual so I actually dont know which setting I should even use to wash my clothes! Please help!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Kitchen Ranges Master
  • 17,129 Answers

It ispossible that your program controller is faulty. since you have tried many programs without any result the controller is not outputing any power to the drain valve and to the wash motor.
So while you moved is it possible that some damage has happened. If so look under for any break in wires to the controller, possible damage to the controller.
It is quite possible that one of this has happened and made the washer inactive.
Please take good look with a good lighting . look out for any wires that have ccome out during the transit.
Hope you get this right.

Posted on Aug 28, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How can I purchase a manual for a Innova pressure cooker model number 42008

You don't have to buy it. You can download the INNOVA pressure cooker manual from here, for free!

Oct 19, 2014 | Crock Pots & Slow Cookers

1 Answer

My Fagor dishwasher won't fill.

Check the water in-let electrovalve, could have dirt or the coil damage

Apr 30, 2014 | Fagor Dishwashers

1 Answer

My singer is only 4 years old an may have been used 10 times and had stopped working about 2 years ago. I have borrowed someone elses and now am wanting to get mine going. I took it to the repair place and...

DO NOT TURN COUNTER CLOCKWISE, IT MESSES UP THE TIMING. I hope that it is going to be saved. You must have something caught under the faceplate. Get a screw driver and take it off, remove the bobbin case and now clean out the whole thing with a brush (tooth and paint brushes work great). Then oil it using your manual as your guide. Then insert a new needle (flat side facing away from you) and rethread. Now when you are rethreading, have your presser foot up, pull top thread, it should move easily, now put the presser foot down, pull thread, it should barely move. This should seat the thread in your tension discs. Or call Brother at 1-877-276-8437 or go to their website, you can download a free manual under customer support or email them, If, this does not work, I can only say, bite the bullet and get it repaired or buy a new one.

Mar 09, 2011 | Singer 1120 Mechanical Sewing Machine

1 Answer

My dryer is not working, a repair man said that

Its sad to say. But most of the new machine's break in the first 2 to 5 years. your console probably is electronic. I did a washer today that was only 3 years old and had same problem $297.00 for the repair.

If we can help you with something. let us know. Make sure to give us the model and make of your machine.

Have a good day

Jan 09, 2010 | Dryers

1 Answer

Zanussin tc7103w not drying clothes

The belt can be replaced as follows.
1 remove top and front of dryer shell
2 belt goes around drum around motor pully then under tentioner wheel
3 replace front and top of dryer
(top pops off use a slotted screw driver)
Thanx for using Fixya Please take your time to rate me

Jun 17, 2009 | Zanussi TC7114W Electric Dryer

1 Answer


you might try here fill in your model and search for user manual download

Mar 28, 2009 | Washing Machines

1 Answer

Frigidare Gas Dryer - get some heat, but NOT hot enough!!

You say its a gas dryer...there is no element. Have you cleaned the lint trap. Is the vent clear of obstructions? I suspect one of these issues will be the problem

Mar 16, 2009 | Frigidaire FGQ1442ES Gas Dryer

1 Answer

Child lock flashing and cant use machine

Press and hold the child lock button for at least 3 seconds.
This should reset the washer to normal use.

Plz rate my solution.

Jan 28, 2009 | Hotpoint Aquarius WD640 Front Load...

2 Answers


First try power off reset,.. unplug and re try

Jul 19, 2008 | Zanussi WJS1265W Front Load Washer/Dryer

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers


Level 3 Expert

75822 Answers


Level 3 Expert

2463 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides