Question about Kyocera FS-2000D Laser Printer

3 Answers

Call Service F000 error

Can you tell me what call service F000 error means?

Posted by on

  • Anonymous Mar 15, 2014

    Call service F000

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

F000 is a panel communication error... update firmware... firmware as far as i know isnt available to the public... contact kyocera

Posted on Jan 15, 2009

  • vishal raj
    vishal raj May 27, 2016

    GIVE ME CONTACT OF KYOCERA
    MY CONTACT NO IS 7301145529

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 56 Answers

Hi, call service.
Probably just firmware error, or defective some PWB
Regards.

Posted on May 09, 2008

I solve it by turn off the printer and later on after one minute turn on again, it works perfectly.

Posted on Sep 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi Fixya,can you please help us how to fix kyocera taskalfa 1800 call service f000


Heat code. You will need to reset in service mode.1087 1087 function find reset fixing assembly and activate. If it comes back you have a bad bulb or a bad thermistor. Could be a thermal switch . It's the fuser assembly.

Feb 12, 2017 | Kyocera Office Equipment & Supplies

1 Answer

I have a f000 fault drum does not turn and will not empty


f000 means a catastrophic failure, usually the motor, belt or just the water pump is jammed.

Oct 11, 2014 | Washing Machines

1 Answer

Hotpoint w640 F000 error code


see this mean :Usually means that either the touch pad or the oven control (also called clock or ERC) is defective and needs to be replaced. If this fault code cannot be cancelled, replace the oven control (also called clock or ERC), touch pad, or both.
Read more: http://www.appliancepartspros.com/repair-help/hotpoint-fault-codes.html#ixzz2gUdlkOnE
http://www.appliancepartspros.com

Oct 01, 2013 | Hotpoint Aquarius WD640 Front Load...

1 Answer

My lap top get this f3-f000-0001 what shod I do?


error message means, hard drive is ruined..what you can do is replace the hard drive!

Mar 17, 2012 | Computers & Internet

1 Answer

Error call service 4000:00433933


The codes on this model are the same as on the Kyocera Mita copiers.
ie: 4-digit codes
Call service 0150 engine pcb EEPROM error
Call service 0420 option paper feeder communication error
Call service 1010 lift motor lock error
Call service 1140 lift motor going up error
Call service 1150 lift motor going down error
Call service 2000 main motor error
Call service 2200 drum motor error
Call service 4000 laser scanner unit (polygon motor) error
Call service 4200 laser scanner unit (pin photo sensor) error
Call service 5100 short-circuited main charger output
Call service 6000 broken fuser heater lamp M wire
Call service 6020 abnormally high fuser thermistor M temperature
Call service 6030 broken fuser thermistor M wire
Call service 6400 zero-crossing signal problem
Call service 7000 toner motor lock error
Call service 7410 drum unit non-installing error
Call service F000 communication error between the main controller board and operation panel board
Call service F010 main board (system DIMM board) checksum error
Call service F020 main or expanded memory error
Call service F030 general failure
Call service F040 communication problem between main board and engine board
Call service F226 main pcb video data control error

May 18, 2011 | Kyocera FS-3900DN Laser Printer

1 Answer

Verifone vx610 decline code 248


This is tricky to answer... different processing service use different codes. If the software you are running is built on a St. Pete's platform, this code means that the transaction you were processing was a 'reversal' (void) and the amount entered didn't match the original.

If you were running a sale and received this code and the display or receipt actually printed "declined" - it is a valid response indicating the customer card was declined and the code tells the service rep at your processing center why it was turned down (over limit, high risk, frozen account, etc...). If the response did show the word "declined", you can call your customer service department for your processor and they should be able to tell you what the code means in their system. If they don't - change processors as this is a standard service.

Aug 25, 2009 | VeriFone VX510

1 Answer

"Service Req E095"


This is an HSYNC Error and probably means the Laser unit on your machine is faulty.

Possible causes of the error :
Laser Scanner
LSU Harness
C585 Main MCU Board

For more info get a service manual HERE

May 28, 2008 | Epson AcuLaser 2600N Printer

2 Answers

I Have a Xerox colour printer 621 and getting the error message (power off, wait 5 seconds then switch on (15-384) or call for service quote on the above fault code) what dose this mean?


Your printer power supply internal is not proper, get help from service provider by telling them error code (15-384), if possible they will try tell u solution online or will attend the complaint.

Apr 02, 2008 | Office Equipment & Supplies

1 Answer

Machine code question


Hi Alexandra,
I hate to be the messenger of bad news but Machine Error 7C mean Engine PCB Error. This error code is for servicer reference and may not appear on the service manual. If it does, it will tell you to unplug the unit and try again. If the problem persists, you have to bring it to an Authorized Brother Service center for repair.

The link below will take you to a Service Manual page where the error code is defined.
http://tinyurl.com/yvcv35

Best Regards,

Jan 15, 2008 | Brother IntelliFAX 4100 Laser Fax

2 Answers

Xerox 8400 error code 37,063.45


Vpp measurement too low.

The printhead power cable may be disconnected.

Xerox All error booklet download LINK

Please rate as Thankyou

Dec 26, 2007 | Xerox Phaser 8400DP Thermal Printer

Not finding what you are looking for?
Kyocera FS-2000D Laser Printer Logo

6,681 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

NewYork kyocera HP...

Level 3 Expert

513 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Tech Bravo
Tech Bravo

Level 2 Expert

337 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...