Question about Apple iPhone Smartphone

1 Answer

My iphone cant power on

My iphone cannot restart

Posted by on

  • Joel915 May 23, 2008

    I installed "Mobile Enhancer" from installer and it told me to restart iphone to take effect. I turned it off and when I turned it back on it displayed the apple and then this:



    .

    AppleMRVL868x: Ethernet address 00:1c:b3

    :46:65:5b

    AppleMRVL868x: Command line options and

    current values used by driver

    AppleMRVL868x: marvel-debug=0xc8

    AppleMRVL868x: marvell-feature-flags

    =0x7

    AppleMRVL868x: marvell-inactivity-ti

    meout=0

    AppleMRVL868x: marvell-powersave-tim

    eout=0

    AppleMRVL868x: marvell-powersave-lis

    tenint=1

    AppleMRVL868x: marvell-ps-confirm-de

    lay=15

    AppleMRVL868x: marvell-retry-limit=1

    5

    AppleMRVL868x: marvell-sdio-pulldown

    s=0

    AppleMRVL868x: WTE=0x0

    AppleMRVL868x: Loading Main Program

    AppleMRVL868x: Firmware Loaded.

    AppleMRVL868x Hardware Details:

    Firmware Version: 8.108.3.p65 (0x41086

    c03)

    I/O Version: 0x0002

    Hardware Version: 0x0011

    Mac Address: 00:1c:b3:46:65:5b

    :/ root#







    I can't sync it with iTunes. I restarted it again by pressing both buttons and same thing happens. Any help please?

  • Joel915 May 23, 2008

    I installed "Mobile Enhancer" from installer and it told me to restart iphone to take effect. I turned it off and when I turned it back on it displayed the apple and then this:



    .

    AppleMRVL868x: Ethernet address 00:1c:b3

    :46:65:5b

    AppleMRVL868x: Command line options and

    current values used by driver

    AppleMRVL868x: marvel-debug=0xc8

    AppleMRVL868x: marvell-feature-flags

    =0x7

    AppleMRVL868x: marvell-inactivity-ti

    meout=0

    AppleMRVL868x: marvell-powersave-tim

    eout=0

    AppleMRVL868x: marvell-powersave-lis

    tenint=1

    AppleMRVL868x: marvell-ps-confirm-de

    lay=15

    AppleMRVL868x: marvell-retry-limit=1

    5

    AppleMRVL868x: marvell-sdio-pulldown

    s=0

    AppleMRVL868x: WTE=0x0

    AppleMRVL868x: Loading Main Program

    AppleMRVL868x: Firmware Loaded.

    AppleMRVL868x Hardware Details:

    Firmware Version: 8.108.3.p65 (0x41086

    c03)

    I/O Version: 0x0002

    Hardware Version: 0x0011

    Mac Address: 00:1c:b3:46:65:5b

    :/ root#







    I can't sync it with iTunes. I restarted it again by pressing both buttons and same thing happens. Any help please?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Its good
-- not avilible in india

Posted on May 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant open bejewled blitz


You can try restarting your phone by holding down the power button, swiping to power off, then holding down the power button again to restart. You can also try deleting the app and re-downloading it.

Mar 16, 2016 | Apple iPhone 6

1 Answer

My iphone 3gs touch screen is not working, i cant unlock it because it will not slide. how do i get this fixed?


Try holding the power and home button, restarting your phone. Continue holding until Apple logo appears and then let go of power, continuing to hold home.

Aug 13, 2013 | Apple iPhone Smartphone

1 Answer

Fring


Restart iPhone

Sometimes all it takes is a restart for the iPhone to become responsive again. To restart your iPhone when it is unresponsive, press and hold the sleep/wake and home buttons until the Apple logo appears (~10 seconds).

Very low battery

It is possible for an iPhone to become unresponsive if the battery drops to an extremely low level. Plug the iPhone into your computer or wall charger and allow it to charge for at least 20 minutes before using it again.
God bless you

May 24, 2013 | Nokia 6120 classic Cellular Phone

1 Answer

IPhone 3g s froze and the screen is white, cant get it to turn off


Press and hold the HOME button and the POWER button together for 30 seconds to force shutdown.

Hold until the screen turns off

Then press the power button to restart.

Mar 26, 2011 | Apple iPhone 3G

1 Answer

I cant slide to unlock my iphone or power it off either


Try holding the top button and the home button until it shuts down. Then power it on again w/ the top button. Hopefully a hard restart will allow you to use the touch screen again.

Feb 06, 2011 | Apple iPhone 3GS Black (16 GB)

1 Answer

My iphone wont turn on past the apple logo


Ehmm try restoring with redsn0w? cuz im sure you cant access itunes. Just download your current firmware (search iphone(x) firmwares on google) and download latest version of redsn0w. thats the only thing that comes in my mind.

You could also try to hold home+power botton like 15 sek and force-restart it. Im sure that wont help but... give it a shot

Feb 04, 2011 | Apple iPhone Smartphone

1 Answer

My iphone cant finish restarting!!


Try this fix:

http://jacko0.wordpress.com/2009/12/19/how-to-reset-an-unresponsive-iphone-and-get-it-working-again/


It might stop it booting in a loop, if it wont help you need to restore the phone and jailbreak it again

Jan 07, 2010 | Apple iPhone Smartphone

6 Answers

ITunes cant connect/recognise my iPhone 3G


Disconnect iPhone and close iTunes.

Go to Start, Control Panel, Administrative Tools.

Under Administrative Tools, Go to Services and look for 2 services.

Apple Mobile Device
iPod service

Both services should be started If they are not, start both of them.

Start iTunes and wait for it to finish loading.

Reconnect iPhone.

Jun 09, 2009 | Apple iPhone Smartphone

1 Answer

I cant open sms and cant open settings and cant restart


http://www.apfelphone.net/2007/10/07/iphone-neustarten-reboot/
  1. Homebutton und Sleepbutton gleichzeitig drücken
  2. Wenn die Meldung “Power off” kommt, ignorieren und warten bis das Apple logo kommt
----------
http://www.tuaw.com/2007/07/18/iphone-troubleshooting-how-to-restart-quit-frozen-apps-and-res/

iPhone Troubleshooting: How to Restart, quit frozen apps and Reset iPhoneby David Chartier on Jul 18th 2007 at 9:00AM
iphone_225.jpgI'm starting to think there is some sort of bad luck attached to my iTunes Store account, as tonight I experienced the third iTunes Store song that completely locked up an iPod - only this time it was my iPhone. While listening to 'Again with the Subtleties' from the Yppah album You Are Beautiful At All Times (US iTunes link) in my iPhone's iPod app, the phone completely locked up at the end of the track with an almost-faded out display. What was worse, the iPhone became completely unresponsive - the display wouldn't accept any of my taps, and even the external buttons were ignored. Momentarily wishing I could simply yank the battery to cut the power and reset the phone, I realized Apple must have some sort of a contingency in place for lock-ups like these.

Fortunately, I was right: The iPhone troubleshooting section of Apple's main iPhone support site contains a walkthrough for situations like this, complete with instructions on how to restart the phone, force quit a frozen app or reset the phone in cases like mine where it has completely locked up. Here are these steps in a nutshell:
  • Restart your iPhone: Most people probably already know how to do this, but just in case, you can simply hold the sleep/wake button on the top for a few seconds to bring up a red slider at the top of the display which allows you to power off the phone.
  • Quit a frozen iPhone app: I know it's a crazy thought, but it is entirely possible that Apple's wondrous iPhone apps can lock up from time to time. In this case, simply hold the Home button when in the app for about 6 seconds to kill the app. You should be able to jump back into the app without restarting the phone itself.
  • Reset your iPhone: Note that this is not Restoring your iPhone; that's the button in iTunes that wipes the iPhone and all your information on it. Resetting an iPhone is nothing more than a hard reset or a forced reboot - you're simply cutting the power and making it reboot. To do this, hold the sleep/wake button and Home buttons simultaneously for a few seconds; the display will quickly wipe itself and you should see the black background and white Apple logo, signifying a reset well done.
Fortunately, that reset fixed my problem and I'm jamming again with my iPhone as I write this. Still, you can be sure that I'll ping iTunes support to find out what's going on with these files, as this is the third one I've downloaded from the iTS that's caused an iPod to stop dead in its tracks. Anyone else experience something like this? You know where to sound off.


Dec 30, 2008 | Apple iPhone Smartphone

1 Answer

Iphone 3 g


Try to restart your phone by holding the power button till it say tun off. I had this problem and found that it was fixed by restarting!

Jul 31, 2008 | Apple iPhone 3G

Not finding what you are looking for?
Apple iPhone Smartphone Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apple Cell Phones Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Lesley Cameron
Lesley Cameron

Level 3 Expert

353 Answers

Are you an Apple Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...