Question about Konica Revio KD-310Z Digital Camera

1 Answer

System error s0041 - Konica Revio KD-310Z Digital Camera

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

The problem is that the lens has become stuck in the barrel after dropping it. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

Hope the advise is useful.

Regards
Andrea

Posted on Aug 29, 2010

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

heatman101
  • 43501 Answers

SOURCE: once i switch on my

Hi,

Checkout this tip about digital camera error messages


Lens Errorfix for Digital Camera

heatman101

Posted on May 03, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Long beep at startup


Probable Causes
Error
Beep Codes
Defective system board.
Memory refresh failure.
1
Faulty DIMM or defective system board.
Error occurred in first 64 KB of main memory.
2
Faulty DIMM.
Read or write error occurred in first 64 KB of main memory.
3
Defective system board.
Timer on system board malfunctioned.
4
Defective microprocesor.
Microprocessor error.
5
Defective system board.
Gate A20 failure.
6
Defective microprocessor.
Microprocessor-execption interrupt error.
7
Missing or faulty video adapter.
Video memory read/write error.
8
Corrupted system BIOS program or defective system BIOS chip.
ROM checksum value does not match value encoded in system BIOS.
9
Defective system board.
NVRAM shutdown register read/write error.
10
Defective microprocessor or cache card.
Cache memory error.
11
Faulty video adapter.
Video adapter failure.
12
Loose video cable connection or defective video cable.Faulty video adapter.
No monitor connected.
13
14

May 09, 2013 | Lenovo 3000 N100 CoreDT2080 VB PC Notebook

1 Answer

Dell 4 beeps


POST Beep Codes

How to fix Dell BIOS 8 beep error.


Probable Causes
Error
Beep Codes
Defective system board.
Memory refresh failure.
1
Faulty DIMM or defective system board.
Error occurred in first 64 KB of main memory.
2
Faulty DIMM.
Read or write error occurred in first 64 KB of main memory.
3
Defective system board.
Timer on system board malfunctioned.
4
Defective microprocesor.
Microprocessor error.
5
Defective system board.
Gate A20 failure.
6
Defective microprocessor.
Microprocessor-execption interrupt error.
7
Missing or faulty video adapter.
Video memory read/write error.
8
Corrupted system BIOS program or defective system BIOS chip.
ROM checksum value does not match value encoded in system BIOS.
9
Defective system board.
NVRAM shutdown register read/write error.
10
Defective microprocessor or cache card.
Cache memory error.
11
Faulty video adapter.
Video adapter failure.
12
Loose video cable connection or defective video cable.Faulty video adapter.
No monitor connected.
13
14

May 09, 2013 | Dell Inspiron 1018 Notebook

5 Answers

My computer has a critical error on the adress 0x3BC3, how do i solv it?


It might be a fake error message. Use this code 754-896-324-589-742 to unlock your computer. More information about this infections:
http://deletemalware.blogspot.com/2011/07/system-process-at-address-0x3bc3-have.html

Jun 26, 2011 | ASUS Eee PC 901 20G Notebook

7 Answers

Sir, there is an error i.e system error e225 in my canon mf 4350d machine please help me shut out this problem


Sir, there is an error i.e system error e225 in display my canon mf 4350d machine please help me shut out this problem

Apr 11, 2011 | Canon ImageCLASS MF4350d Laser All-in-One ...

1 Answer

What is this error mean that i get during boot up? 312.198 Eth0:(185488) System Error Occurred (0) 312.199 Eth0:(185489) System Error Occurred (0) 312.200 Eth0:(185490) System Error Occurred...


Hi,

I think this is related to to the NIC (Ethernet port).

Go into the BIOS and set it to default settings, see if that resolves the problem.



Let me know how you get on.



Regards.

Jun 30, 2010 | MSI P4MAM2-V Motherboard

1 Answer

CAMERA GIVES AN "SYSTEM ERROR S0041" MESSAGE


I have this error too, except for me, the lens won't go back in, so I can't close the camera.

Feb 25, 2008 | Konica Revio KD-500Z Digital Camera

1 Answer

CAMERA GIVES AN "SYSTEM ERROR S0041" MESSAGE


Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance.

Regards
Andrea

Sep 28, 2006 | Konica Revio KD-310Z Digital Camera

Not finding what you are looking for?
Konica Revio KD-310Z Digital Camera Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Cameras Experts

kakima

Level 3 Expert

102366 Answers

Robert A. Watson
Robert A. Watson

Level 3 Expert

707 Answers

Tony Parsons
Tony Parsons

Level 3 Expert

3981 Answers

Are you a Konica Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...