Question about Fuji FinePix S5100 Digital Camera

1 Answer

Date on camera

I need to get the date to show on the film when it is developed how do i do that..i have the time and date set on camera but when i print the picture no date on the picture ..how do i put it on there.thanks for any help

Posted by on

  • datsc Oct 31, 2008

    date won't show when viewing picture on PC, but I've set the date per
    page 72 of the manual. Do I have to just believe it will print
    when I take this in to be made into pictures?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Http://www.rug.nl/rechten/voorzieningen/audiovisueledienst/productendiensten/handleidingen/finepix_s5500_manual.pdf
this the link for the manual for the fuji finepix s5100, if you download the manual to your computer (if is a pdf file) open it and scroll to page 72. It says to set the power switch to play and press the F (function button), then press the left or right until you see the DPOF. then you use the up or the down to select the with date or without date to print to you pictures.

Posted on Aug 21, 2008

1 Suggested Answer

  • 82 Answers

SOURCE: My camera shows that the date and time are set up

Even though the date is set in the camera, there is another setting for the date to appear on the pictures. If you go through the menu items you will find a setting for this. I will say something like, "show/display date". When this is turned on it should also show in the viewing screen.

Posted on Apr 10, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Film not developing


I have the same problem as you. Pictures are in black and photo cartridges already wasted 3. Today I opened my camera and not a spring tea that is attached to the lever capture modes (sunny, noblado etc) was detached. Because I remember when the camera is turned on (pulling the lens) capture modes to move too. So every time you take a photo you must manually set the capture mode, and it stopped working. I hope it is resolved by attaching the spring. You already solved?

uma_t5 (a) hotmail.com

Jan 21, 2014 | FUJIFILM instax mini 7 Digital Camera

1 Answer

Set the time and date


If you want your camera to automatically deface all your photos by scrawling a string of numbers across them, press the MENU button, use up/down-arrow to select SETUP (three horizontal slider), press the OK button, use up/down-arrow to select "Date Stamp", select the desired setting, and press OK.

Oct 27, 2012 | Kodak EasyShare CX7530 Digital Camera

2 Answers

My camera shows that the date and time are set up but date does not print on picture when developed. it's a new camera and I just developed my first set of prints and there is no date on any of them. ...


On digital cameras, the data is stored with the filename. Check the back of your prints to see if the dates were not printed there. Most companies do put at least the date information on the back of the prints as well as any other metadata stored with the file produced by the digital camera. Unlike film cameras, which could only record the date by actually putting it on the picture, digital pictures contain metadata that can include things such as people tags, location tags (geotagging), etc. depending upon the capabilities of your camera. The date and time is always stored along with the filename on all digital cameras. If the company that printed your pictures did not include the date on the back of the picture, ask them if they can do it or find another source to print your pictures that can.

If this did not address your issue, please reply with any amplifying information so that I may more accurately address your issue.

I hope this helped!

Apr 10, 2011 | Kodak C195 Digital Camera

1 Answer

I have a kodak easyshare c195. when i set the time and date imprint although it shows on the camera when i upload the pictures to my computer the imprint is not there. I need this imprint for work.


How do I get the date printed on my photo?

I'm sorry, but very likely you can't. The thing is, this was a useful feature on film photos, but the concept has been overtaken by technology, and is no longer relevant. Heh - you probably disagree with me, so let me explain that fully! When you take a photo with a digital camera, the current date and time are automatically stored in the photo file. In some cameras, it will be the same as the file date. Some cameras date the file with the date of download rather than the date of capture, but the date inside the file will always be the capture date. The date of capture is one of the items of EXIF data. You can read about this 'metadata' on wikipedia.

So how does EXIF data fulfill the benefits of the old 'print on film' date? From the point of view of indexing your library and simply not forgetting when the photo was taken, the EXIF data should always be present in the file, unless you choose to erase it. Thus, you will never lose track of the date of capture; if you have the image, you have the date. You can read the date with many tools, and in fact even Windows explorer will tell you the date if you simply hover over the picture. Here's an example; the bubble help shows the time of capture where the picture was taken, (windows shows me the time of capture in my own time zone).

andythechikn_6.png

What about legal proof of something? Sorry, you can't really do that any more. You couldn't have done it if you'd printed it on the image, either; it's just too easy to fake. The date of capture is editable, so it doesn't prove anything. If you need proof, get legal advice... in the heat of the moment, include a cellphone in-frame showing the date and time; you could fake that too, but it would be much harder.

Oh, you wanted your dates printed on physical pictures? Find a print shop that will print the EXIF capture date on the reverse of your photo; that way the face of your picture won't be spoiled. There is software that will print index sheets of your images and list their capture dates and times, too.

Feb 15, 2011 | Kodak Digital Cameras

1 Answer

How do you set the time and date on my canon sure shot camera model 115u


you go to the menu and go to the little tool and go down you will see (Date\Time) and that is where you can set the time and date!! good luck !!!:)

Apr 04, 2010 | Canon Sure Shot 115u II Date 35mm Film...

1 Answer

Developing a film without opening the camera


Am i right in thinking the keystone is a old 8mm movie camera? Never had any experience with movie cameras, or developing their film- I'm goin to assume its like 35mm developing, apologies if this is completly useless advice.
I'm fairly certain you will not be able to develop film in camera (camera will end up pretty wet). If the problem you have is actually getting film out o the camera I'd suggest a changing bag- basically a light tight bag that you put the camera in with your developing tin (if your home developing) or canister if your using a lab, you then have to put your hands inside 2 holes either side and transfer your film from camera to developing container- blind.
I'd advise doing a couple practice runs first with some old unused film just to get the hang of it- it can be tricky.
Again I have no experience with 8mm film processing but I'd imagine the principles are similiar.
You can get hold of changing bags from most photographic retailers, and always follow instructions that came with your film.

Nov 05, 2009 | Digital Cameras

1 Answer

Date/time issue on Canon EOS 350D


I was wondering the same when I first got my EOS. Learned later that the digital pictures do not have date/time stamp on the front of the photos like film cameras' photos. Details of digital photos are stored digitally in each image file's EXIF.

If you want to print photos showing the date/time, some software including Zoombrowser EX can do that. In Zoombrowser, select the photos you want to print. In Step 2 (Printer & Layout Settings), in the bottom left, you can choose Date and/or Time and even the colour of the font.

Mar 29, 2009 | Canon Rebel XT / EOS 350D Digital Camera

1 Answer

Setting date on Canon elph Jr.


To set the date:
1. Press the Date button (rear left button on top of the camera)
2. Press the Select button (small round button up and to right of date button, may need pen point to press), display may show 97 1 1, with the 97 blinking.
3. Press the Set button (below the Select button) to change the value of the blinking character.
4. Press the Select button again to change to the next character. Use Set again to change. Repeat until date is set.
5. Press the Select button when all characters are set.

To set time, press the Date button again and the display should change to time (24 hour mode). Use the Select and Set buttons as above to set the correct time.

C, H, and P indicate the type of picture you want to take. C stands for Classic, and the picture will be in a standard aspect ratio. H is the wide angle setting, and the printed picture will be printed wide angle. P is panoramic, and the printed picture will be even wider angle than H. All this depends on the processor who develops your pictures for you. Ask if their equipment can read and process according to the instructions your camera will automatically put on each exposure on your film.

The three buttons on the left side are:
Top -- Flash setting. On (lightning bolt) or Off (lightning bolt with line through it).
Middle -- Film rewind button. Film should rewind automatically when fully exposed, but you can rewind before the film is fully exposed by using this button.
Bottom -- Self timer. Pressing this button puts a clock symbol on the display. When this is set, the shutter will delay 10 seconds after the shutter button is pressed. Press this button a second time to turn off the self timer.

Mar 17, 2009 | Canon Elph Jr. APS Point and Shoot Camera

1 Answer

Canon A540


The date will only show up on the picture under a limited set of circumstances on the Canon PowerShot digital cameras, of which the A540 is one. You've probably found the Date function in the menu, but discovered that it was off, grayed out, and skipped over whenever you tried to reset it.

Date stamp will only work in "Postcard" mode. Press the Function button (labeled "FUNC SET"), then press the down button until you reach the Recording Pixels selection (usually labeled "L", but not always). It's probably the bottom onscreen selection. Use the right or left buttons to select Postcard, then press the Function button again.

Press the Menu button and scroll down to Date Stamp. Now you should be able to select "Date" or "Date & Time" with the right or left button. Press Menu again and take your pictures.

Sep 29, 2008 | Canon PowerShot A540 Digital Camera

1 Answer

Display date & time on developed pictures


When you say it's displayed on the screen, do you mean while it's in playback mode, it's embedded there?

If not, you will have to put your resoltion in postcard mode and make sure in menu that your date or date/time stamp is turned on.

To get to your resolution settings, turn camera on to shooting mode, hit function/set button and arrow down to the bottom left corner where it will show your resolution (L,M,S, etc) and this is where you will find postcard mode.

This setting is the only one you can use date time stamp and will show up in prints, but only good for 4 x 6 prints, anything larger will not be good resolution, it will be pixelated because it's only enough quality for a small print.

Hope this helps!

Mar 12, 2008 | Canon PowerShot A460 Digital Camera

Not finding what you are looking for?
Fuji FinePix S5100 Digital Camera Logo

Related Topics:

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fuji Digital Cameras Experts

kakima

Level 3 Expert

96417 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Tony

Level 3 Expert

2598 Answers

Are you a Fuji Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...