Question about Canon PIXMA iP1300 Printer

1 Answer

How to refile the cartridge of canon pixma ip1300 printer

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 472 Answers

Hi,
Instructions :

  1. Remove the old ink jet cartridge from the printer following the manufacturer instructions. Close the lid on the printer to keep it free from dust and debris while you are refilling the Canon ink cartridge.
  2. Locate the ink tank on the cartridge. Put a 3mm drill bit in a drill. Drill a hole in the top of the ink tank on the cartridge.
  3. Gently insert the needle on the bottle of ink into the hole you just drilled in the ink cartridge. Avoid squeezing the bottle until the needle is completely inserted in the ink tank.
  4. Squeeze the ink bottle gently to refill the cartridge. Fill the tank with a little at a time until the cartridge is full.
  5. Remove the needle from the ink tank. Wipe the top of the Canon ink cartridge off with a paper towel. Place a small piece of duct tape over the drilled hole. Rub the tape to remove air bubbles and to make sure it adheres to the cartridge.
  6. Put the refilled ink cartridge back into the printer. Clean the head of the printer by running the printer software and following the instructions for head cleaning.
Good Luck!

Posted on Aug 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon pixma ip1300 showing ink is running low


i think you must searching "kontol" at google

Jan 31, 2014 | Canon PIXMA iP1300 Printer

1 Answer

5100 ...................Carriage control error


Sorry, can't be solvable.. for e5 error.

If you refill your color cartridge that's what it happens.

For Canon, if you refill 4~5 times... (only apply to color), your cartirdge is not readable.

The only solution would be replace your cartridge with new one.

Apr 11, 2011 | Canon PIXMA iP1300 Printer

1 Answer

I have just refilled the color cartridge of canon PIXMA iP1300 printer and it shows cartridge can't be recognised !!


most manufacturers put a chip in the cartridge to tell the printer that it is new and full.
you need to tell the cartridge its been refilled.

you can buy reset devices for cartridges off ebay etc.

---


Please dont forget to vote if you liked my answer


thanks

Feb 09, 2011 | Canon PIXMA iP1300 Printer

1 Answer

Refills canon ip1300 cartridge was not recognize


clean contacts on both cartridge and cartridge holder with a lint free lightly damped cloth and try again

Nov 26, 2010 | Canon PIXMA iP1300 Printer

1 Answer

Problem with my canon printer ip1300


You can try this it works for my 1500 printer.
Go to the printer settings and turn off the ink low messages.
Switch your printer on and hold the paper feed switch down for the count of five the orange light should flash. Then switch off the power and switch back on again the green light should stay steady. If you do not come right on this one you can email me at grayjem@mweb.co.za

Aug 10, 2009 | Canon PIXMA iP1300 Printer

3 Answers

Ink cartridges cannot be recognized in canon printer


Hello!
Remove the cartridges and gently wipe the cartridge contacts with a dry cloth, then put them back in. Then, hold the "resume" button for 10 seconds for each cartridge, that should reset them.
If that doesn't work, one of your cartridges (sadly) needs to be replaced.

Apr 15, 2009 | Canon PIXMA iP1300 Printer

2 Answers

Canon pixma ip 1300


Make sure the cartridge is seated properly in the correct place. If the cartridge is a refilled compatible, throw it in the bin and get a new one. Approx 30% of compatibles can be faulty.

Jul 16, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Canon PIXMA iP1300 Printer Logo

Related Topics:

211 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1924 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...