Question about Gaggia Titanium Espresso Machine

2 Answers

When I turn on my Gaggia Titanium Machine it automatically goes on to rince cycle, and continues on rinse cycle, only stopping when it asks me to fill watertank. Its now switched off all the time as everytime it goes on it just goes onto rinse cycle.

Posted by on

  • Heidi OConner Aug 30, 2010

    Can you explain in more detail, the English you use is hard to understand, can I get another opinion

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Contributor
  • 1,070 Answers

Welcome to FixYa
Dear User
Follow this Link.There is Some Question and Solved Answers.Read it Carefully to Solve your Problem

Posted on Aug 30, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 944 Answers

Hi,

Did the machine stop after a you pour water?
If it stops after a
pour water then you have to replace the flow meter.The flow meter is the defective part.It costs less.
If you have hands on do it else take it to a
Gaggia service persons.

Note:Sometimes the printed circuit board might be damaged,you have to reset it.
Gaggia service persons can reset it

Thank you for using fixya.

Posted on Aug 28, 2010

  • Natarajan Ramasamy
    Natarajan Ramasamy Aug 31, 2010

    Did the machine stop after a you pour water?If yes this is because the flow meter is the defective one.

    It look likes the above image you have to replace this.Some times cleaning this could also help you
    out.Some times the printed circuit board might be damaged.They do programming stuffs inside the board.So when there is error in it this problem could occur,Only Gaggia service persons can reset it.

    Please do rate the solution if the issue is resolved or post a comment for further assistance.
    Thank you for using fixya have a nice day:-)

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gaggia Titanium Multiple Problems--


Hello!

Please check the "troubleshooting" guide of the manual to Gaggia Titanium.

Hope it will help!
https://manualsbrain.com/en/manuals/1441405/?page=40

Oct 05, 2017 | Gaggia Coffee Makers & Espresso Machines

1 Answer

Gaggia Titanium: stuck on 'rinse'.


Try first unplugging power cable for five minutes, see if this reset machine.

Aug 20, 2008 | Gaggia Titanium Espresso Machine

Tip

Gaggia Titanium, cycle is stuck on rinse and does not complete.



This problem is common on Gaggias. Sometimes if you wait 30 minutes or more, the machine will complete the cycle and go back to normal functions.
Just wait to allow time for the rinse cycle to complete, when machine is stuck it can take over 30 mins.
You can do this by continuing to fill up the water resovoir four or five times to see if the machine completes the rinse cycle on its own.

If that doesn't work contact Gaggia, US number is 888-389-4123, for contact number in your area consult your user manual.

Gaggias may give you some trouble of this kind from time to time, but they are good Italian brand coffeemakers, and the coffee is usually really great.

on Aug 26, 2008 | Gaggia Titanium Espresso Machine

2 Answers

Rinsing cicle is not stoping.Mashine not responding to any baton.How to stop Rinsing cicle and go to normal mode? Thanks Radan


If its is only the rinsing cycle at start up you can go into the menu and turn the rinsing cycle off.
If its the rinsing cycle for the descale, it has to run out of water to finish. Then reprime the machine and it will start to heat again.

Oct 28, 2010 | Gaggia Titanium Espresso Machine

2 Answers

Our Gaggia Tianium is stuck on rinse cycle, water pouring out


Just let it run the cycle,don't press any buttons.
When it runs out of water refill it and let it continue.
I get this problem a lot,

Dec 26, 2009 | Gaggia Titanium Espresso Machine

1 Answer

Gaggia Titanium stuck on RINSING CYCLE


Let it rinse it may run for some time.
you will not be able to remove the brew unit as it is engaged to be rinsed.

Nov 17, 2008 | Gaggia Titanium Espresso Machine

1 Answer

Titanium plus stuck on rinsing cyle


go in the menu remove rince cycle after it say ventilate put water in container start machine open valve it should ventilate if it doesnt remove water container take turkey blaster put water in it put the blaster in the hole were the water container goes force pressure with the blaster at the same time open valve you vented by now put cointainer back fill with water enjoy thanks for using fixya pierre

Feb 10, 2008 | Gaggia Titanium Espresso Machine

1 Answer

The rinsing cycle stays on and DOES not pump water


Try first to continue filling up the water resovoir (UP TO FOUR times) to see if the machine completes the rinse cycle on its own. If that doesn't work contact Gaggia Customer Service in the US at 888-389-4123. Sally there was VERY helpful and should be able to resolve your problem.

Jan 03, 2007 | Gaggia Titanium Espresso Machine

2 Answers

My machine was stuck on rinse cycle now on ventilate...


Try first to continue filling up the water resovoir (UP TO FOUR times) to see if the machine completes the rinse cycle on its own. If that doesn't work contact Gaggia Customer Service in the US at 888-389-4123. Sally there was VERY helpful and should be able to resolve your problem.

Dec 31, 2006 | Gaggia Titanium Espresso Machine

Not finding what you are looking for?

Open Questions:

See all Gaggia Titanium Espresso Machine Questions

Gaggia Titanium Espresso Machine Logo

Related Topics:

259 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gaggia Coffee Makers & Espresso Machines Experts

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you a Gaggia Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...