Question about Polaroid FLM-3232 Television

1 Answer

TV has been off for awhile. Turn on with remote or along the side of set. Light goes from red to blue.No picture. Unplug cord from back of set and plug back in. Repeat the turn on process and the set comes on with picture. No problem. I can turn off and on with either remote or manually and it will be OK. It is when it has been off for extended period, I have to repeat the unplug and plug back in. Its as if it resets itself but the process is getting old of pugging in and out. Any suggestions to correct.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

Most likely you have bad caps (capacitors) in the power supply. Google "bad caps" and you'll find a wealth of info on this problem.

Posted on Aug 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my flat screen tv turn on and off by it self and the only way to stop it is unplug power cord?


This is an indication that they capacitors in the power supply are going bad.

Jan 20, 2015 | Televison & Video

2 Answers

I have a Sharp flat panel model LC-20SH4U. The units power LED light is red. No effect (sound or picture) when remote or on/off switch is activated. The LED light slightly blinks.


Resetting the TV
If the buttons on the remote AND the buttons on the TV case do not work (channels do not change and you cannot open or navigate the menu), the TV has stopped responding. Reset the TV as follows:

NOTE:
Some TVs have a reset button. If available and accessible, try using the reset buttons before using the steps below. Using the reset buttons can save time.

clip_image001.jpg
1. Unplug the TV power cord from the power outlet.
2. Unplug any connected devices (DVD, Set-top boxes, etc...)
3. Press and hold the TV power button for five seconds.
4. Plug the TV power cord back into the power outlet and turn on the TV.
5. Open the on-screen menu to confirm that the TV is responding again.
6. Turn off the TV and reconnect the devices.
7. Turn on the TV.

Hope this may help;

Regards,
VOTIT

Aug 09, 2008 | Televison & Video

1 Answer

My name is shakena brown, i have a sanyo 32in flatscreen TV that I brought from Wal-Mart. The TV is not an year old yet and it will not show anything. When I plugin the cord in and turn the TV on the...


Your set is still under a manufacturer warranty. Take your set back to Wal-Mart and they will send it out to be repaired, or give you a new one.

May 19, 2011 | Sanyo Televison & Video

1 Answer

No sound/picture and red power light always on (Hitachi 43FDX15B)


When u turn the tv on,u hear alot of clicking?That mean the Ballast that help the projection bulb to work is dead.Change the Ballast,might as well change the bulb too.U don't know what is the condition of the projection bulb in.

May 29, 2010 | Hitachi 43FDX15B 43" Rear Projection...

2 Answers

My polaroid TV will turn on but there is no picture or sound


blown caps in the power supply a 470m at 16 volt cap it will be puffed up

Sep 18, 2009 | Polaroid FLM-323B Television

4 Answers

Tv tunrns on then goes to stand by flashes 4 times & repeats


turn tv on picture comes up 2to3 seconds later tv blacks out then stand by red light flashes 4 times in a row repeatedly..can not turn on or off when stand by light starts flashing but before tv blacks out you can turn tv on and off repeatedly and picture and sound work.You have to unplug power cord for 30 seconds after stand by light comes on to get tv to turn on.

Mar 13, 2009 | Sony BRAVIA KDL-32S2000 32 in. LCD HDTV

1 Answer

TV won't turn off


Problem solved. I opened the configuration menu, went to Setup, More, Light Effect, changed setting from "Always" to "In Watching TV".

Dec 09, 2008 | Samsung LN-T4071F 40 in. LCD HDTV

1 Answer

No Picture on screen


THIS PROBLEM HAS HAPPEN TO ME WHEN MY LAMP WAS
ABOUT TO DIE. WHAT I DID WAS UNPLUG THE TV SET FOR
A SHORT WHILE, THEN WHEN PLUGGED AGAIN IT CAME ON BUT THE PICTURE WAS DIM AND THE LAMP ONLY
LAST FOR FEW DAYS AFTERWARDS.
W.J.M.

Jun 23, 2008 | Hitachi 50VS810 50" Rear Projection HDTV

5 Answers

No picture but has sound


My LG TV
switch on no picture but short period of sound then nothing

Jan 20, 2008 | Sony KP-51HW40 51" Rear Projection...

Not finding what you are looking for?
Polaroid FLM-3232 Television Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74198 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...