Question about New Balance 1400 Treadmill

1 Answer

Have a new balance 1400 treadmill. when i power it on the screen goes blue and it will not doing anything.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Does the screen turn on (blue) and then go black or does it stay blue? Mine has a similar problem where when the main power switch is flipped, it lights up, shows the initialization screen, then goes dark. Pressing any button on the console does nothing. I opened the console up and suspect one programmable microcontroller is bad. I'm going to see if I can get that part from FitnessQuest instead of replacing the whole board.

Posted on Jan 02, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Start button doesn't work

Tooshy, sounds like a faulty control board.

Mar 06, 2016 | New Balance 1400 Treadmill

1 Answer

I have an older NB 1400 Treadmill (7 years old)

Motor controls for New Balance can be found by doing a Google search on Treadmill Analyzer and look for the MCB List page of repairs offered :-)

Jul 15, 2014 | New Balance 1400 Treadmill

1 Answer

My New Balance 1400 treadmill recently stopped working. There is power going to the motor. The lights are on but there is no power to the display. nothing lights up and none of eh controls work. The...

It sound like either the wire harness that goes to upper console is bad or the Motor Control Board that has the 5v or 12v is missing. Here is the bad news New Balance is out of the Treadmill business and do not carry these items anymore. Their might be one other thing you might try is that if this unit was not maintain as owner's manual suggests, then the fuse may have open up. You must open the motor shroud locate motor control board find the fuse, if you have a multi meter check continuity of the fuse if open replace it with the same value ( maybe 15amps). Plug unit in if the display returns then proceed to do the prescribe maintenance in owner's hopefully that the belt and deck was not damaged when it went dead.
Good Luck!!

May 09, 2011 | New Balance 1400 Treadmill

1 Answer

I can not get the treadmill to power on.

I have the same problem and have isolated it to the main console board. When you flip the main power switch, does the console display light up briefly and then go dark?

Aug 25, 2010 | New Balance 1400 Treadmill

1 Answer

The belt on my New Balance 1400 has become kinked up. I tried adjusting it by loosening it up, straightening it out, then tightening it back up, but it kinks up again. Before it kinked up for the first...

Unfortunately once the belt has a crease that all she wrote. Belt replacement is the next step.Call Fitness Quest they are the makers of your treadmill @ 1-800-321-9236

Jul 31, 2010 | New Balance 1400 Treadmill

1 Answer

I havea new balance 1400 I keep getting two error codes on my screen the first is E1 and then A E3 on elevation.?

Hi This is dinesh here,

The E1 Error is for the sensor problem and the E3 error is for the IC crasg in the machine...

Jul 22, 2010 | New Balance 1400 Treadmill

1 Answer

I have a 1400 that when it has been running for 20 or 30 minutes goes to Power Failure and generally throw me against the rail to an abrupt stop. I do believe it is home electrical as I run a 20 amp...

This generally means that lubrication is needed to be applied between the belt and belt. You may purchase these kits thru the products name is Lube and Walk follow the instructions that come with it to apply the lubrication.

Jun 11, 2010 | New Balance 1400 Treadmill

1 Answer

Power will not stay on

Greetings to you,
1.Check the connections to the PC board
2.Ensure that the belt is well aligned
3.Check moving parts for friction or oil the parts

Mar 10, 2010 | New Balance 1400 Treadmill

Not finding what you are looking for?
New Balance 1400 Treadmill Logo

Related Topics:

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top New Balance Exercise & Fitness Experts

Matt Olenzek
Matt Olenzek

Level 2 Expert

297 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers


Level 2 Expert

115 Answers

Are you a New Balance Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides