Question about Printers & Copiers

1 Answer

Error code CF323

Can't find this code in any manuals as to origin of problem and how to correct

Posted by on

  • Anonymous Sep 04, 2008

    hello everyone,

    Just figured I'd follow up with what fixed the problem,
    all CF codes are system errors ( which ones i still don't know )

    1) reinstalled all the original boards less the fax board.
    2) restored the copier to factory default.
    3) reformatted the HDD.
    4) powered up and tested. ( made a test /system config copy and ensured fax was uninstalled.)
    5) powered down. unplugged.
    6) reinstalled the original fax board leaving the phone lines disconnected.
    7) powered up and tested for new hardware being installed.
    8) powered down and connected phone line.
    9) powered up and tested fax options and TX/RX confirmations.
    10) called the boss, said the "jobs done!, ya owe me a beer.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Starter get low

Posted on May 07, 2008


Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the calibrating code of toshiba e studio 2303a


(1)While pressing [0] and [5] simultaneously, turn the power ON. ? Adjustment Mode
(2) [SETTINGS] ? [USER FUNCTIONS] ? Select [DRAWER] ? Select [DRAWER1] ? Set the paper size to A4/LT. ? [OK] ? Set A4/LT for the paper in upper drawer.
(3) [CANCEL] ? [CANCEL] ? [SETTINGS] (Return to code entry screen.)
? [10]? [SETTINGS]? [START] (A gamma adjustment patch chart is printed out.)
(4)Place the patch chart for adjustment printed in step (3) face down on the original glass. Place the chart aligning its black side of the gradation pattern against the original scale.
(5)Key in a code "7165" and press the [START] button.
(6)If process finishes successfully, select "Yes" and press the [OK] button to apply the adjustments. (To cancel the reflection of adjustment results, press the [CANCEL] button.) In the case of an abnormal ending, "Error" is shown.
Press the [CANCEL] button to clear the error display. Next, confirm that the patch chart is oriented correctly on the platen and not at an angle, then do the process from step (4) again.
(7)Press [20] ? Press [SETTINGS] ? Press [START].
Notes:
•Compare with chart output in step (3), there should be no differences in patterns and no faint colors.
(8)Place the patch chart for adjustment printed in step (7) face down on the original glass. Place the chart aligning its black side of the gradation pattern against the original scale.
(9)Key in a code "7167" and press the [START] button.
(10)If process finishes successfully, select "Yes" and press the [OK] button to apply the adjustments. (To cancel the reflection of adjustment results, press the [CANCEL] button.)
In the case of an abnormal ending, "Error" is shown. Press the [CANCEL] button to clear the error display. Next, confirm that the patch chart is oriented correctly on the platen and not at an angle, then do the process from step (9) again.
(11)Turn the power OFF.

Sep 04, 2016 | Toshiba Printers & Copiers

1 Answer

What do i do when the printer indicates error


Your printer manual will have a list of error codes with instructions on what to do to correct them. If you didn't get a printed manual, you can find one on the original setup discs that came with the printer, or on the manufacturer's web site (usually on a page labeled "Support").

Oct 31, 2014 | Printers & Copiers

1 Answer

I tried to install my printer. I do not have the original set-up cd. The error light does not go off. I don't know if insatlled properly.What do I do?


Please try to download and install the correct drivers from support.lexmark.com website, make sure you filter the correct operating system.

If the error light does not go off, please press the continue button to display the secondary error codes.

For further assistance, please contact Lexmark Technical Support

Sep 10, 2011 | Lexmark E250dn Laser Printer

1 Answer

Designjet 2500cp error 010036 00000100


Hello. You probably have a worn out trailing cable. The manual says:

System Error: 010036 (see next page for 010036 0000XX00)
Problem Description: ADC Test Failure in the Main PCA.
Corrective Action: Try the following:
 Switch the Printer OFF from the back and
then disconnect the Trailing Cable from the
Electronics Module. Switch the Printer ON and
see if the Error Code now changes to “010037”.
If the error code remains as “010036”, replace
the Electronics Module �� page 8-6.
 If the Error Code changes to “010037” then try
the following:
Make sure that the Trailing Cable is
connected correctly.
Replace the Trailing Cable �� page 8-36.
Replace the Carriage Assembly �� page 8-42.

The manual can be downloaded at: www.lpscomputer.com/ec/manuals.htm

Apr 28, 2010 | HP DesignJet 2500cp InkJet Printer

1 Answer

Mp145


A Canon MP145 E4 Error Code means that your Printer didn't detect the Ink Cartrigde. It sometimes happen when you're using a non-original cartridge or infusing it. When Canon Printer detect this abnormality, the first Canon self defense system is by Stop Printing. And then displaying some messages on your Computer Screen, indicating that your ink cartridge have to be replaced because it's EMPTY.
Below are the manual way to correct this problem :
1. Turn On Your Printer. 2. Wait Till The Printer Led Screen Show The Error Code ( E4). 3. Then Press and Hold Black & Color Button for about 5 - 10 seconds.
Hope that your problem is solved.Dont forget to give a positive feedback after pressing the accept button.

Sep 03, 2009 | Canon PIXMA MP150 All-In-One InkJet...

2 Answers

I have a problem on my canon mp145 with an error code E4. But I already change it to a new cartridge but still the error code still appears. I also reinstall the drivers but still the same.


Hi, I found this answer on the net. Let me know if this helps
A Canon MP145 E4 Error Code means that your Printer didn't detect the Ink Cartrigde. It sometimes happen when you're using a non-original cartridge or infusing it. When Canon Printer detect this abnormality, the first Canon self defense system is by Stop Printing. And then displaying some messages on your Computer Screen, indicating that your ink cartridge have to be replaced because it's EMPTY. Below are the manual way to correct this problem : Turn On Your Printer. Wait Till The Printer Led Screen Show The Error Code ( E4). Then Press and Hold Black & Color Button for about 5 - 10 seconds.
Thanks
Ranjit

Aug 11, 2009 | Canon PIXMA MP160 All-In-One InkJet...

2 Answers

Konica bizhub C351 with a C9401 error code


The output from the CCD Sensor is a predetermined
value or less during CCD Sensor gain
adjustment.

1
Check the flat cable for proper connection and
correct or change as necessary.

2
Change PWB-C.

Aug 03, 2009 | Konica Minolta bizhub C351 All-In-One...

1 Answer

Hi! I have the Epson DX4850 All-in-one printer. I just purchased a Continuous ink system for it and tried to install it. I followed the installation manual very carefully and when I had finished installing...


IssueAn 0xc18xxxxx or 0xc19xxxxx ink system error code displays on the front panel. The printer cannot copy, receive faxes, or print. Solution
Press the On button to turn the printer off. 
Unplug the power cord from the back of the printer.
Remove all the ink cartridges.
Wait two minutes.
Plug the power cord into the back of the printer.
Press the On button to turn the printer on. 
Install the ink cartridges when prompted.
If the error code does not display, the issue is resolved.
If the 0xc18xxxxx or 0xc19xxxxx ink system error code displays on the front panel, service the printer.

Dec 25, 2008 | Epson Stylus DX4850 All-In-One InkJet...

13 Answers

Error code 4H on sharp ar 5316


WHEN THE SHARP AR-5316 PHOTOCOPIER IS SWITCHED ON THE ERROR CODE 4H APPEARSAND THE MACHINE CANNOT BE OPERATED. IHAVE TRIED THE SOLUTION SUGGESTED JUNE THIS YEAR BUT IT DID NOT WORK. WHAT CAN I DO TO GET THE MACHINE TO WORK? IT IS VERY URGENT.

Feb 18, 2008 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

Minolta CF2001 error code C3720


original glass cooling fan motor turning at abnormal timing

Jan 25, 2008 | Minolta CF2001 Copier

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96518 Answers

old marine
old marine

Level 3 Expert

1464 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...