Question about Pioneer DEH-P6800MP CD Player

1 Answer

Md/cd changer not playing

I just bought this car with a pioneer stereo (don't know which model) and it has a Clarion CD changer in the back. It appears to be hooked up. The guy I bought it from removed his CD's when I bought it. (I should have asked him how it works). Anyway There is a little controller that shows which cd is playing (1-5) and which track. You can see that it is playing the cd, but I can't figure out how to tune the stereo into it. I have tried turning the aux on. (doesn't come through there). I have put it in CD mode, and tried to his the different number on sterero (doesn't work). I have tried all the AM stations to see if it was hooked up through that. (didn't work). Help Please! The guy I bought the car from has not responded to my emails.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,224 Answers

You gotta goto where it says mutly cd usually source button
whats the model number i might be able to find you a manual for the sterio
most sterios are built on the same principles just different workings the source button is most likely the colprit you need to push the source button

see if that works let me know

Posted on May 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

DOES THIS STEREO RUN A SONY CD DISC CHANGER?


No, it will not run any cd-changer, if the model number has a letter "p" before the number then it will run a Pioneer CD Changer.

Dan

Dec 07, 2009 | Pioneer DEH-2100 CD Player

1 Answer

Installation Guides


Click on Clarion (below FIXYA)on this website, type in your model No & search. You will get a shortlist; click on your model,below the page u will get Manual/Guides. Click on the blue, voila! u hv your manual on line.

Nov 26, 2007 | Clarion ARX7470

1 Answer

CD changer output not working


There is an obscure setting for 'AUX' on/off that is hard to find unless you know what you're doing or looked in the manual. Typical Pioneer for ya.

Apr 19, 2009 | Pioneer DEH-P3600 CD Player

1 Answer

Installed a clarion radio it powers up but no music thru speakers


sounds like a short in your wiring to your speakers the best thing to do to check this is run a speaker wire directly to the speaker from the stereo check it that way and see if it works.If that don't work it's the wires on the stereo connection.The speaker wires on most aftermarket stereos are mostly colored 2 of each green,purple,white & grey.

Nov 09, 2008 | Clarion DB538RMP CD Player

1 Answer

AUX input on Pioneer DEH P31000


There is a plug on the back called an IP-BUS. You should be able to hook the ipod directly up to that with a simple homemade adapter. I built one for mine and it works fine.

http://stereophonik.com/gutterslide/IP-BUS_Hack/

Oct 07, 2008 | Pioneer DEH-P3100 CD Player

1 Answer

Ipod wire


I had the same problem with my 4600mp series. I had to go thru my function key button and enable the aux. By default even if you plug in something the aux is off.

Mar 11, 2008 | Pioneer DEH-P3100 CD Player

2 Answers

Kenwood KDC-2025 won't play CDs


source http://www.kenwood.nl/support/veelgestelde_vragen/ Changer Error Codes ? E-00: Poor Cable connection. ? E-01: Magazine not properly set in changer. ? E-02: No Disc in magazine. ? E-03: CD does not have selected track number. ? E-04: Disc is dirty, upside down or unreadable. ^^^^ ? E-10: No data is recorded on the MD. The player plays the next disc automatically. ? E-99: Changer malfunction, disc may be caught in machine or changer requires service. I suggest the lens needs a clean, or someone has dropped it and broken the delicate lens mech. Luck

Apr 30, 2007 | Kenwood KDC-2025 CD Player

1 Answer

KDC-MP228 cd no play w/ codes


Gave up on it and bought a pioneer. Kenwood said to take it in to a service center. The service center would have cost me more than the crappy stereo.

Jan 11, 2007 | Kenwood KDC-MP228 CD Player

3 Answers

MD/CD Changer Control Options


press source button repeatedly to select "CD" or "MD" be aware that in order to connecting Ipod to a car stereo you will need to use an extension cable with 3.5 mm stereo connectors on each end to connect iPod to your car stereo system's aux input, or use a cassette adapter if your car stereo doesn't have a sound input jack. Either of these items can be purchased at stores that sell car stereo accessories. good luck!

Nov 12, 2005 | Sony CDX-CA400 CD Player

Not finding what you are looking for?
Pioneer DEH-P6800MP CD Player Logo

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Car Audio Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

xxxxxx xxx

Level 3 Expert

4706 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Are you a Pioneer Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...