Question about Washing Machines

2 Answers

I could smell burning from my washing machine.When i opened the drum smoke came from the drum

Posted by on

  • 1 more comment 
  • Anonymous May 06, 2008

    same thing...smoke and the feeling that it is rubber burning...no fire though.

  • lynntownsend May 06, 2008

    not sure what model number but its an Aqua 1000 cn100

  • lynntownsend May 07, 2008

    the washing machine is Candy and have had it for about 5 years

×

2 Answers

Kelvinator...must be 20 years old..but works really well, it's on the very rapid spin cycle at the very end I think that maybe something is chafing??

Posted on May 07, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,073 Answers

What is the model number

Posted on May 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Smell of burning rubber and smoke from drawer


Sounds like your drive belt is loose or worn out. You will probably need a new belt. Is it possible something got inside the machine and jammed the belt?

Dec 12, 2014 | Hoover Washing Machines

1 Answer

I washed a load of clothes and the washer worked perfectly until the last 3 minutes where the washer does the final spin and all of sudden smoke pours out of the back of the washer and when I opened the...


well is it a smell of burning rubber? maybe the belt that turns the drum has got jammed. over time these belts get loose and when a full load of clothes are washed the belt slips creating heat hence the smoke..hope this helps..

Dec 04, 2013 | GE WSXH208A Front Load Washer

1 Answer

After wash yesterday i opened door and smoke and smell of rubber burning and small amounts of grey rubber in washer


check the inside stainless steel drum isnt moving up and down. use the plastic outer drum as a reference. If its wobbling up and down, then your drum is bad. If it isnt then for some reason, the boot is making contact the drum. I would actually get a tech out to confirm this.

Feb 13, 2013 | LG WM1814CW Front Load Washer

1 Answer

Ge front loading washer drum fills with smoke at end of last rinse cycle and smells of burning rubber


THE INNER DRUM IS BAD WITCH LETS IT RUB THE FRONT SEAL OF THE WASHER YOU NEED TO SEE IF YOU CAN MOVE THE DRUM UP ARE DOWN ARE SIDE TO SIDE IF SO ONE OF THE SUPPORTS ON THE BACK BROKE AND THE GET THE SMELL OUT WASH THEM IN WHITE VINAGER

Oct 31, 2012 | Kenmore Front-Load Washing Machine 3.5...

1 Answer

The washine machine finished it's cycle but there was smoke coming out of the drum and a burning rubber smell


The usual cause of smoke coming out of drum is that the heater element has come on or stayed on with no water in the drum
Try it on a spin cycle only, if smoke still comes out of drum, then could be a faulty pump, or main motor is burning.

Jan 20, 2010 | Baumatic BTWM4 Front Load Washer

1 Answer

My beko washing machine smells of burning


i need a motor circuit to test the motor of a defy automaid it does not spin fast

Nov 24, 2009 | Washing Machines

1 Answer

Burning smell and smoke from motor


Sounds like the transmission is jammed.  This will cause the motor to bog and burn.  

Nov 26, 2008 | Maytag Dependable Clean Top MAV5920EWW Top...

2 Answers

Smoke smell coming from my 80 series Washer


do you actually see smoke or is it you have a burning smell
if you have a smell the motor may be overloading on spin
sometimes this is due to too much soap powder in wash
and when machine spins the water cant get away due to soap suds under and around bowl
acts like a brake on motor
try no soap powder in next wash
a good way to tell is that you still have soap in washing if you lift the lid (with no soap powder added)

Dec 02, 2007 | Kenmore 15864/15862 Top Load Washer

1 Answer

Washer emitting burning smell and smoke on fast spin


Yes, the heating element is coming on when it shouldn't. A likely cause is the pressure pot (Level sensor sender unit) being blocked with sludge. You'll find this under the machine, either screwed to the RH side of the tub, near to the front of the machine secured by three Philips screws, or attached to the side of the big hose that goes from the tub to the pump,secured by a Jubilee clip, underneath the machine. disconnect the power and remove the pressure pot, in both cases it's a long rigid white plastic tube, from one end of which comes a narrow flexible plastic hose which goes up to the top of the cabinet and is attached to the pressure switch itself. This tube is likely to have a load of muck in it, as its bottom end. Clean this out, and if your element didn't burn out, then everything should now be fine.

Oct 28, 2006 | Hotpoint WMA35 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

773 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...