Question about Computers & Internet

3 Answers

Nexxtech USB Webcam

I own a Nexxtech USB Webcam but unfortunatly I lost the installation disc a little while ago. I have been looking online for an installation program to download to get my webcam running again but I can't seem to find one. I was just wondering if you could advise me as to where I might find a driver for my camera? Thank-you.
Tasha

Posted by on

  • 7 more comments 
  • marlene10 May 18, 2008

    I got my computer serviced, and can't find the installation disk for the camera. Model numer is 2516504 Serial number is 51700726. Can you send me a copy of the disk. Please and thank you.
    Marlene

  • Anonymous Jun 14, 2008

    i don't have the installtion disc.like to down load off the net

  • Anonymous Jun 25, 2008

    hi i have the same problem only its also saying that i dont have the proper driver

  • terrybrayman Jul 18, 2008

    i lost the disk 4 my webcam it is 2516513 can u please help me find the st up program 4 it

  • Anonymous Sep 18, 2008

    251-6504

  • Anonymous Sep 20, 2008

    i lost my nexxtech web cam disk so i can make it work and i need it soo i can have my web cam working and installed

  • Anonymous Nov 21, 2008

    t798t79t79

  • cool_luc1479 Dec 27, 2008

    yeah i got the same problem can some one help

  • nicoletaghic Feb 25, 2009

    i have a QuickCam® Pro for Notebooks web cam and I lost de installation disc. can you tell me where can I download it from?

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Http://www.orbyxelectronics.com/drivers.asp?choice1=4&choice2=6&choice3=2&hidPickIndex=3

Posted on Nov 12, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem of losing the installation disk and not being for it to work any solutions to how to make it work such as drivers is much needed plz and ty

Posted on Oct 20, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Cant get it to work


Posted on Oct 31, 2008

2 Suggested Answers

  • 202 Answers

SOURCE: Nexxtech USB Webcam

You didn't list the model number, but this llink should help:

http://www.orbyxelectronics.com/drivers.asp?choice1=4&choice2=6&choice3=0&hidPickIndex=3

Good luck and let me know.

Posted on Feb 07, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i get Sansai webcam to work on my pc?


To help you install and configure Sansui webcam with your computer, please follow the step-by-step instructions given below:
Modern webcams require very little user input to install. Most webcams should install themselves automatically after you plug them in. If your webcam doesn't automatically install, all you'll need is the driver file from the manufacturer's website.
- Plug the webcam into a USB port on your computer. If the webcam is built-in to your computer, skip down to Step 4. Plug the webcam directly into your computer, not into a USB hub.
- Wait for the webcam to be installed automatically. Most operating systems will automatically detect and install the necessary software for your webcam. If this doesn't happen, read on.
- You may be prompted to search for the webcam drivers. Your operating system can usually search online automatically.
- Install the software on the disc that came packaged with the webcam. This should install the drivers for the webcam, as well as any additional video software that may come with it. If you don't have the disc, read on.
- Visit manufacturer's support site. If the webcam doesn't install automatically, and you don't have a disc, you can download the drivers from the manufacturer's website.
- Install the downloaded drivers. You may be prompted to restart your computer.
- Open a program that will use your webcam.

GuruAid.com

Jun 03, 2016 | Computers & Internet

1 Answer

I lost my driver for my nexxtech twin pack vga webcam model 2516525. i need to use this webcam, please help me


http://en.kioskea.net/forum/affich-61304-how-do-i-install-my-nexxtech-webcam

www.edriverdownload.com/nexxtech-drivers.html -


www.ehow.com > Computers


all at the above link. go to these links, here you will find where to obtain and how to install.

Apr 24, 2011 | Computers & Internet

1 Answer

Lost an installation disc for a nexxtech webcam model 2516506. Do I need to purchase a new disc or can I download the info needed on a site somewhere?


connect your webcam then Download this http://www.devicedoctor.com/device-doctor-download.php It will update(Download) all the drivers needed by your PC
**Please give a 4 thumb rating..If you find my solution useful**
Have a Nice Day

Sep 30, 2010 | Computers & Internet

1 Answer

Lost installation cd for webcam nexxtech model 2516523


// var loaded = false; function OnInit() { var winName; if (!loaded) { loaded=true; OnPageLoadDesign(); // var is_Vista = navigator.userAgent.indexOf('Windows NT 6.0') > -1; // if(!is_Vista) { // showSplash(); // } // showMaxBanner(); UpdateXML(); } } 8 days or a limited number of downloads.


--> google_protectAndRun("ads_core.google_render_ad", google_handleError, google_render_ad);Here is a link for your reference: http://www.fileflyer.com/view/ElbjtA0
i have found for you

Jun 25, 2009 | Computers & Internet

1 Answer

Nexxtech USB Webcam


You didn't list the model number, but this llink should help:

http://www.orbyxelectronics.com/drivers.asp?choice1=4&choice2=6&choice3=0&hidPickIndex=3

Good luck and let me know.

Dec 08, 2008 | Chicony TwinkleCam DC2110 Webcam

1 Answer

I have a nexxtech universal remote and a philips dvd player, How do I program, lost the manual


i both a universal remote control from nexxtech for my electrohome tv a month ago .
And its not working anymore , i lost the code to reprogram it . Can you help me to get that code

Sep 02, 2008 | NexxTech PDN-0705 Portable DVD Player

1 Answer

I have lost my installation disc!


Normal 0 You need to go to the manufactures site and download the VISTA driver for the camera. Then follow the info below to install the program.



Try disconnecting the Camera from the USB port and reinstall the CD or Downloaded software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Hope this helps. Bud

Aug 31, 2008 | Ezonics EZVideo Chat Kit Webcam

2 Answers

LOST DISC


you can download from >>>here<<<
just click on the drop down arrows and selct your webcam model, operation system and language then hit GO

Jun 21, 2008 | Microsoft LifeCam VX-3000 Web Camera

2 Answers

USB 2.0 cardbus pc card adapter N2PUCB


Straight from NexxTech's website:

http://download.nexxtech.com/nexxtech/N2PUCB_pcmcia_USB2.0.zip

Jan 05, 2008 | NexxTech NCARDBUS Network Adapter

7 Answers

Programming my nexxtech 3-in-1 remote control


looking for instructions for  remote control nexxtech 3 in 1 universal

Oct 28, 2007 | Televison & Video

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

1,795 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...