Samsung softjig interface unit regarding...........
MY NAME IS ASHOKKUMAR.
KINDLY TELL ME WHERE CAN I GET THE UNIT FOR RECTIFICATION OF SAM SUNG MONITORS . I DOWNLOADED ALL THE SOFTWARE WHICH IS NEED FULL FOR US. I HAD MORE THAN 5 MONITORS PENDING COMPLAINTS DUE TO COMPLETEEE-PROM SHORT/ NOT WORKING .KINDLY TELL ME WHERE CAN I PURCHASE THE ADOPTER FOR MY USAGE .
I AM WAITING FOR YOUR RESPONSE .
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I would tell you to replace the Interface/Control board on this unit, but it is next to impossible to find parts for these units. They are so cheap, most people just replace the unit.
I recommend you do the same.
Drop up on www.newegg.com or www.tigerdirect.com and buy a replacement.
laqbot7000, If you have opened unit, what is the brand name of capacitors (electrolytic's) printed on them. CapXon, Elite, Jun-Fu, are some you don't want to find on the smps board. Are any of the rubber seals pushed out of the bottoms of any capacitors? Is fuse still ok? Did you use a magnifying glass or low power "inspection" microscope(5x - 20x) to possibly find any "thinner than hair" fractured solder connections to component leads soldered to the copper foil circuit traces?? Also "visual" the black bodies of all solid state (transistors, bipolar, mosfet) devices for "burns" and "distortion" from overheating. 12fixlouie
Good morning! kindly review the operations manual included when you bought the unit, takeing note on the best set-up settings of the display properties. Otherwise, you may opt to set it to other resolutions that will support the best display. best regards.
Good morning! please review the operations manual of the unit for its proper set-up settings. probably, there is a defective part of the unit which should be replaced, try to bring the unit to its authorized service center. best regards.