Question about Samsung BD-P1500 Blu-Ray Player

1 Answer

My Samsung Blu Ray Player is 1 year old. Recently, it began doing something strange. When I put a disc in, the main menu of the disc should appear on my Samsung 50" HD screen. Instead, the screen displays a "no signal" message although the audio for the main menu can be heard. If I press "enter" on the remote (assuming it's entering whatever should be highlighted on the main menu), the video on the disc will play on screen without any problem. This has happened with a lot of discs although some discs work 100%. It happens with standard DVD's as well as Blu Ray DVD's. I thought perhaps a firmware update would fix the problem but it didn't. Any suggestions?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The CRM codes changed, I was getting this on some new disks, Avatar and the happening.

Upgraded to the latest cod and all is OK again.

Posted on Aug 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you unlock region code on Samsung BD-H6500 smart blue- ray player


The hack for this 3D Blu Ray player is the same as for previous models.

1. Make sure NO disc or usb stick is inserted into the player.
2. Turn on your your blu ray player.
3. When the main menu appears, press the REPEAT button followed by the region code your player is currently locked to - depending on which country
you are in (eg: in Australia press "REPEAT 7 6 8 8 4".
4. In the top right corner you will see your region code flash (eg: 4 for Australia).
5. Press 9.
6. Turn off and on and your BD-E6500 is now region free.

How this differs from the opening post is no need to open and close the disc tray.


- - - - - - - - - - - - - - - - - - - -

So, after pressing REPEAT please enter one of the following codes the matches your current region lock:

1 - 2 9 3 3 4 (US)
2 - 5 7 5 3 8 (Europe)
3 - 5 6 7 3 2 (South East Asia)
4 - 7 6 8 8 4 (Australia / South America)
5 - 5 3 8 1 4 (India, Ukraine, Belarus, Russia, Africa)
6 - 2 4 4 6 2 (China)

9 - Region Free

Then press '9' and your player is region free.

Jan 12, 2016 | Samsung Televison & Video

1 Answer

Why won't it stream or play disk?


Call Kurtis: Why Your Samsung Blu-ray Player May Not Play ...

sacramento.cbslocal.com/.../call-kurtis-why-your-samsung-blu-ray...

KOVRSep 26, 2013 - Blu-ray players aren't the same as DVD players. ... disc compatibility issues arise and firmware updates for our Blu-ray players are ... My BD-C6500 is apparently one of those old blu rays that won't play blu rays. ... If you are viewing netflix streaming thru your samsung bluray then YES it definitely can. Its not ...

play mp4 files on a blu-ray player - MP4 - Streaming Video ...

www.tomsguide.com/answers/id.../play-mp4-files-blu-ray-player.html
Jan 9, 2014 - I see a lot of Bluray players will play mp4 files. ... If it won't do it via the USB port, will it do it if the mp4 files are on a DVD? ... player has a menu, items likeDisc Tray, Netflix (I use this menu choice to watch streaming Netflix), ...

Sony BDP-S590 3D Blu-ray Disc Player with Wi-Fi (Black)

www.amazon.com/...Blu-ray-Player.../B006U1YUZE

Amazon.com, Inc.Sony BDPS790 4K Upscaling 3D Wi-Fi Blu-ray Disc Player. 4.0 out of 5 stars 334 ยท Panasonic DMP-BDT220 Integrated Wi-Fi 3D Blu-ray DVD Player .... With the Sony BDP-S590, you can wirelessly stream music throughout the home to .... at internet.sony.tv as in the past some Sony products won't connect to certain services ...

Amazon.com: Sony BDP-S5100 3D Blu-ray Disc Player with ...


Jan 07, 2016 | Televison & Video

3 Answers

Sony BDP-BX2 Blu-Ray player now rejects valid discs as "invalid"


Sometimes the latest update IS the problem, not the solution. If possible go back to an earlier version and retry the disks. Many of the answers here about power down and the like are all good and sometimes helpful things to do. They also point to the fact there isn't much a consumer can do to fix or repair malfunctioning DVD/Blu-Ray players and it always comes down to cost. Do you want to repair or replace. You've had your unit, you say, about 3 years? I think this is about end of life. Anyway, try the previous software version and if that works turn automatic update off.

Nov 14, 2013 | Sony BDP-BX2 Blu-Ray Player

1 Answer

I have a Samsung BD-C7500 blu ray dvd player with USA region setting and need to change/convert to Australia region setting... Is this possible?


The details below only work for the DVD Region (dependant on your Firmware) and not the Blu Ray.

1. Ensure that there is no disk in the tray.

2. Switch the player on.

3. Wait until the main menu page appears and the player stops doing anything.

4. Press the REPEAT button - just above the TV channel selector at the bottom right of the controller - and enter the players region code from below on the number pad.

5. The the players region code should appear at the top left corner of the screen.

6. Quickly enter a "9" to make the player region free. (Just try pressing 9 on the remote controller until you see 9 appear in the upper left corner of your TV screen.)

7. Open and close the disc tray. Power down and power up again.

All region codes are as follows

1 - 2 9 3 3 4
2 - 5 7 5 3 8
3 - 5 6 7 3 2
4 - 7 6 8 8 4
5 - 5 3 8 1 4
6 - 2 4 4 6 2

Jun 14, 2011 | Samsung BD-D7500 Player

1 Answer

My sister and I just purchased Beauty and the Beast Diamond Edition that includes the dvd and blu ray disc. When we put on the blu ray disc it played the previews in the beginning and then went to the main...


If you hit "Disc Menu" on the remote just as the fireworks start, you won't have to go through the entire Previews section, and then the disc seems to work fine...

Oct 11, 2010 | Samsung BD-P1500 Blu-Ray Player

1 Answer

I need a region free code for my Insignia NS-BRDVD player (a bluray/DVD player purchased in Canada).


This worked for my NS-BRDVD2-CA, basically the same model as yours.
1. Turn on the player.
2. Press the home/setup button and release. Enter 9-1-1-3 on the number pad.
3. "Configure player" appears in the wheel menu to the left of the screen. Using the up or down arrow button on your remote, navigate to it and press enter.
4. Three menus appear on a blue screen in the centre of the set: DVD Region, BD Region, and BD Profile. Select the one you want and press enter.
5. A grey screen appears in the centre showing the various regions. Navigate to the one you want and press enter.
6. Exit the grey menu by pressing the left arrow key, then press it again to exit the blue menu. The screen will appear as it did in step 3 before you pressed enter.
7. Open the drawer and put in your foreign disc. Wait a little bit. When it's ready, the disc's main menu appears. Play it like you would any disc.
8. Voilà! Consider yourself fortunate: You're now able to play foreign DVDs and Blu-rays on your cheap North American player.

P.S. Remember that you have to do this every time you want to play a foreign DVD, because when it's shut off the player automatically defaults to Region 1 for DVDs and Region A for Blu-rays (i.e. North America for DVD and the Americas for Blu-ray). The "configure player" menu disappears sometimes, too; to see it again, simply re-perform the "home/setup, 9-1-1-3" hack.

Aug 15, 2010 | Insignia NS-BRDVD Blu-Ray Player

1 Answer

Blu-ray disc stops at main menu


Cheryl

Has your husband verified you have the most current Firmware for your unit? this should take care of your issue

http://www.samsung.com/us/support/download/supportDown.do?model_nm=BD-P1500&mType=FM&vType=L&disp_nm=BD-P1500

Jan 22, 2009 | Samsung BD-P1500 Blu-Ray Player

3 Answers

No picture from samsung blu-ray to samsung TV


Put the blu ray player into the tv to see if you get a picture,if you do put it back into the amp then assign the hdmi input you have used in the amps set up menu,if you did not get a picture when hooked up to the tv run a cable from the video [yellow] out put to the video in put on the tv and then set the out put of the blu ray player.

Hope this helps.

CABLE GUY.

Nov 16, 2008 | Electronics - Others

1 Answer

Troubelshooting of YDP 530 DVD player


Diamond Electronics makes/made Yahoo DVD players

http://diamond-electronics.com/NewOne/index.html
Manual & some Trouble shooting
http://diamond-electronics.com/NewOne/productInfo/ydp530.html

Jan 08, 2008 | Yahoo YDP305 DVD Player

Not finding what you are looking for?
Samsung BD-P1500 Blu-Ray Player Logo

282 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...