Question about Linksys SPA-2102 NA Analog VoIP Adapter (2) FXS, (2) RJ45 (SPA2102-NA)

2 Answers

My Linksys SPA2102 is not working. The power light flashes slowly, and the internet light flashes quickly, and i know it has internet because my computer is connected to the system. However, when I pick up my phone, there is no tone and I can't dial.

Posted by on

  • ficazam Aug 27, 2010

    I already reset it over the phone, but it is still not working, and now i think it doesn't have internet anymore.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,513 Answers

Hi,

It seems that a reset over the phone is required for your linksys. Please click on the bellow link to understand the steps how to do this.

http://www.voip.com/help/Residential/Troubleshooting/Troubleshooting/Troubleshooting.aspx

Let us know if you have something more to ask else please accept the solution.
Thanks for contacting fixya.com

Posted on Aug 27, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,800 Answers

I'm assuming that all bills are paid and the connection is active.
The internet light (actually the LAN status light ) it flashes rapidly to signal that data is being transmitted so at least you had a good connection. But the power light should have stayed constantly lit - it blinks when it signals a hardware fault or when it's incapable of communicating with other devices. 
Also on the case there are 2 more leds for the phone connections - normally they should be fully on on stand-by and blinking when you are using the phone. If this led doesn't light at all then the phone isn't recognized so either the phone is faulty or the Linksys adapter. Use another phone - if it's the same then you need a new adapter.

Posted on Aug 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i set the linksys spa2102-r back to factory settings


Unplug the unit. Using a ball point point push down the reset button. While pushing the button down, power up the unit. Continue to hold the button down for 15 seconds or until you get a visual indication on the front panel.

Apr 23, 2011 | Linksys SPA-2102 NA Analog VoIP Adapter...

1 Answer

Connecting VOIP device without having any router, but wifi intern


hi yvo2000. Sorry, you cant do that. That router (well, the SPA2102) needs a cable from your neighbor's router in order to provide internet to the POTS jacks. Please don't forget to rate my answer if it helped you. Thank you :D

Apr 28, 2010 | Linksys Computers & Internet

1 Answer

How unlock linksys modem spa2102


If it's locked to sunrocket, google for SPA2102 sunrocket unlock. Loads of how-tos out there.
If it's not sunrocket, go to broadbandreports.com and send a PM to DogFace05. He has a small business based around unlocking SPA2102 routers (so it's not free - but will turn your SPA into something usable)

Dec 05, 2009 | Linksys SPA-2102 NA Analog VoIP Adapter...

1 Answer

Need to add Linksys WRT54G-TM wireless router with Linksys SPA 2102 phone adapter


your SPA2102-R seems to have one ethernet connection and one internet connection.
your WRT54G-TM seems to have one internet connection and 4 ethernet connections.

What you are trying to achive is; plug a ethernet cable into the ethernet connection on your SPA2102-R then plug the other end into the internet port of the WRT54G-TM

hope this helps, I have assumed that you intend to use a DSL broadband supplier not ADSL.

if you are changing service from DSL to ADSL then your WRT54G-TM needs to be first in line configured and working. then plug the internet port from the SPA2102-R into any of the WRT54G-TM ethernet ports.

Nov 06, 2008 | Linksys Wireless-G WRT54G Router

1 Answer

Linksys SPA2102 conflicts with my Router


I have the same problem and I configure my router in PPPoe with my username and password provided by my ISP and now my router is working...

Sep 04, 2008 | Linksys SPA-2102 NA Analog VoIP Adapter...

1 Answer

I have just had a wireless internet system put in how do i make voip calls? I AM A NEWWBEE PLEASE HELP


hey if you r having wireless system then you have to connect your spa2102 to your pc

connect your pc to internet via wireless connection
now you r having lancard on your pc which is free rightnow
connectyour spa2102 to this lan card
and if you r having win xp then go to my network plase
rightclick on it
go to property
you can se local area connection and wireless connection both in this window
right click on wireless connection and go to its property
find internet connection sharing or allow other users to connect internet via this connection/pc
enable it so that your spa 2102 can get internet connection via lancard

Feb 13, 2008 | Linksys SPA-2102 NA Analog VoIP Adapter...

1 Answer

Linksys Phone Adapter with Router Model SPA2102-R Connecting to Internet


from the cable modem or dsl connection, connect to WAN on the linksys device From PC port to the computer. you will have to make sure if all the port or opened. Normally DATAONE will not block any ports but its always adviceable to check if all the potrs are opened. you will have to put your mac code on the modem. If that does not work you might have to clone your device (information transfer from modem to your device) and you should be good to go...............

Nov 19, 2007 | Computers & Internet

Not finding what you are looking for?
Linksys SPA-2102 NA Analog VoIP Adapter (2) FXS, (2) RJ45 (SPA2102-NA) Logo

Related Topics:

1,346 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...