Balck n decker hover mower gx 300 need manual as took switch box off as not working and need to know where to put the bits :)

Could be a bad battery or your charger may be faulty.

DeWalt's website will have one. (DeWalt, Black and Decker, Stanley Bostitch, Porter Cable, etc are now all the same company). Go to this link and put your model number in the search box. Pick your correct model from the search results and on the right hand side of the page will be a link for the owners manual.

DeWalt, Black and Decker, Porter Cable, Bostitch parts diagrams and manuals.

It sound like the battery isn't charging correctly. Check all the battery contacts are clean first and then try and check the charger is ok.

you could just try drilling the case out where the lever pivots and put a long nut and bolt to hold the lever in place

This might help. It's from the black and decker website. Should give you enough info to be able to remove the bag.

http://www.dewaltservicenet.com/documents/English/Instruction%20Manual/625233-00,BV2500.pdf

did you open the mower maybe loose connection on the rectifier or maybe worn brushes.

try this link..........scroll down till you find your model

http://www.useandcaremanuals.com/manuals.asp?ID=1

the black actuator that moves on & off facing up. looking at the switch terminal facing u. ok. all left side terminal for white & red. all right side terminal are for 2 black wire. if you have fax machine i can send u the wiring. [email protected]

cmm1200 switch in the handle problem. switch contact maybe burnt out. parts are available. see dewaltservicenet.com or toolpartsdirect.com for diagarm etc.

i used impact gun with 3<4 socket and run the impact in reverse