Question about Brother MFC-7820N Laser Printer

2 Answers

Toner life end message flashes

I don't understand why the message "toner life end" keeps flashing even after I've installed a new toner cartridge. I followed all the instructions on the package and the message doesn't go away.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 62 Answers

Did you reset the toner life?

open the front cover, press the option button, on the screen will display ''reset toner life 1 yes 2 no ''
press 1 and close the cover.

toner life reseted

Posted on May 11, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Toner life end

Posted on Apr 15, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Xerox workcentre m24 replace toner even if the toner is new


There is no need to worry a lot what you can do is that, just open the toner access door located at the front of the printer and then you can scroll down the list of cartridges until you find the one which is giving you the message of Replacing toner.

Then press the button "1" to reset the display toner settings. If still you find any of the difficulties then we have a best place available which can actually sort out your issue and they are Micro Toner Supplies and their official website is where you can find a lot of things is https://www.microtonersupplies.com.au/toner/xerox-toner-cartridges

Basically these guys(Xerox Toner Cartridges) are famous for supplying cartridges at a specific cost and to your mentioned area but in this site there is a contact option available where you can contact them and can solve you issue. Hope this may work to you and if still you find any difficult even after accessing the prescribed website then there are many other websites where you can find better solutions.

Aug 30, 2014 | Xerox Office Equipment & Supplies

1 Answer

How to reset toner life end message on dcp8060


The counter reset method depends on the cause of the toner life end message and the condition of the newly installed cartridge.
When a USED toner is installed the reset gear is set to IN USE.
When a NEW toner is installed the reset gear is set to FACTORY SET.

Dec 13, 2013 | Brother DCP-8060 All-In-One Laser Printer

1 Answer

Keep getting a "toner end


If you are using a refilled toner cartridge or a third party cartridge that is most likely the problem.

Try using a factory new cartridge.

Don

Nov 11, 2010 | Office Equipment & Supplies

1 Answer

Toner light is on on Brother HL-2170 Laser Printer and the computer is not recognizing a print task. Can you help me fix this problem? Also, I just replaced toner a couple weeks ago.


Description of Problem 100000013553
I just replaced the toner cartridge and the Toner LED is still on, or the status monitor continues to display the message "Toner Life End". What can I do?

Description of Solution 200000017394
@font-face { font-family: Verdana;}@page Section1 {size: 8.5in 11.0in; margin: 1.0in 1.25in 1.0in 1.25in; }P.MsoNormal { FONT-SIZE: 12pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"}LI.MsoNormal { FONT-SIZE: 12pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"}DIV.MsoNormal { FONT-SIZE: 12pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"}A:link { COLOR: blue; TEXT-DECORATION: underline}SPAN.MsoHyperlink { COLOR: blue; TEXT-DECORATION: underline}A:visited { COLOR: purple; TEXT-DECORATION: underline}SPAN.MsoHyperlinkFollowed { COLOR: purple; TEXT-DECORATION: underline}DIV.Section1 { page: Section1} If the Toner LED is still on, or the status monitor continues to display the message "Toner Life End" after installing a new toner cartridge, verify you are using a genuine Brother toner cartridge.

The yield of the TN starter toner cartridge is approx. 1,000 pages.
The yield of the TN330 toner cartridge is approx. 1,500 pages.
The yield of the TN360 toner cartridge is approx. 2,600 pages.
Approximate cartridge yield is declared in accordance with ISO/IEC 19752(Letter/A4).

Brother strongly recommends that customers use only genuine Brother drum units and/or toner cartridges. Each Brother laser printer is designed to work at pre-set temperatures that are matched exactly to each of our individual toner formulations. Each individual component is designed to work with the other to ensure quality and reliability. Using non-Brother supplies may affect the hardware performance, print quality and machine reliability. The Brother limited warranty does not apply to any problem that is caused by the use of third party drum units, toner cartridges or toner.

1. Verify you installed a NEW, out of the box, genuine Brother toner cartridge (TN360/TN330).

If a toner cartridge from another machine was installed (even if there?s still toner left in the used cartridge) or a starter toner cartridge (included with the purchase of a machine) was installed, the Toner LED will stay on and the message "Toner Life End" would continue to appear on the display.

2. Verify the toner cartridge is installed correctly by following the steps listed below:

a. Open the front cover by pulling the tabs on the left and right side of the printer towards you.

b. Lift the drum unit slightly and pull it out. Place the drum unit on a piece of disposable paper or cloth to avoid spilling and scattering the toner.

c. Remove the toner cartridge from the drum by holding down the lock lever (blue tab) on the left side of the drum unit and lift the toner out. Handle the toner cartridge carefully. If toner scatters on your hands or clothes, immediately wash it off with cold water.

d. Gently rock the toner cartridge from side to side five or six times to distribute the toner evenly inside the cartridge.

e. Place the toner cartridge into the drum (be sure it clicks into place).

f. Clean the primary corona wire inside the drum unit by gently sliding the blue tab on the top of the cartridge from right to left several times. Return the blue tab to the home position before reinstalling the drum unit assembly.

g. Reseat the drum unit into the printer pressing it in securely.

h. Close the front cover making sure it latches on both sides.

If the Toner LED is still on or the status monitor continues to display the message "Toner Life End" the printer will need service.

The printer has a one year limited exchange warranty. If the printer is in warranty, call Brother Customer Service at 1-877-Brother (1-877-276-8437) for warranty options.

If the printer is out of warranty, contact a Brother Authorized Service Center for repair by clicking on the link below:
http://www.brother-usa.com/service/default.aspx

Jul 21, 2010 | Brother HL-2170W Laser Printer

2 Answers

"toner life end" message even with new cartridge


Open the front cover
Press the OPTIONS button
Press the START button
Press the number 1 key twice
Close the front cover.

You may need to go through the steps above twice to reset the toner.

Jul 11, 2010 | Brother IntelliFax-2820 Laser Fax

2 Answers

I am changing the ink cartridge i put the new one in and it keeps saying End of life and it has a new cartridge what do i do


Here is the solution that will reset the count and allow your fully functional toner cartridge (the one the printer tells you is empty) to continue to work.

Open the front cover.
Press options button.
Press the start button.
Press + or up arrow button 10 times.
Press set button.

You have to do this with a long pause or the system will reset and you will have to start over.

Good luck.

May 24, 2010 | Brother DCP-7020 All-In-One Laser Printer

1 Answer

Lexmark e250dn printer, toner light is flashing, new cartridge


Could be photoconductor at end of life.

You shoul still be able to do a printer test print (press the arrow button).

Look on the printed pagesfor Toner AND Photoconductor.

These show as OK when new or very low count, and 100% when fully used.

If the toner is showing as 100% when you've just replaced it, either the chip is faulty, the wrong one, or if the cartridge is a remanufactured one possibly nor been replaced.

Jan 19, 2009 | Lexmark E250dn Laser Printer

3 Answers

Change of toner


I have a brother mfc 7840w

I first used the electrical tape trick and that worked for a while. Then got the toner low message again. I then tried the *00 trick, which works as follows:

1. lift lid and open front cover
2. press clear/back. "Replace Drum?" will appear on the screen.
3. Press "*00" it will then read accepted and the toner low error (End of Toner Life) should go away.
4. close it all up and your done.

Jun 08, 2008 | Brother MFC 7420 All-In-One Laser Printer

2 Answers

MFC 8460N giving Toner Life End message


I just solved my own problem. Try it for yours. I had been using several compatible toners for the MFC-8460N with no problems until today, as I posted earlier. On a hunch, I went to the local office supply store and purchased one original Brothers TN550 toner and put it into the printer and closed the cover. Everything clicked. Toner End Life message gone. I then took that Brother toner out and put the compatible one back in and still everything was fine. Am keeping the original Brother toner as a "kickstarter" if it happens again.

Mar 10, 2008 | Brother MFC-8460N Laser Printer

1 Answer

Toner life end


There is no reset code the likely thing is that you have a faulty toner cartridge. Put another new one in and check the machine then.

Before you try the above shake the toner cartridge and tap it some more as it may also be the toner inside have become solid and needs breaking up.


Hope one of the above works for you
Thanks J

Jan 08, 2008 | Brother IntelliFax-2820 Laser Fax

Not finding what you are looking for?
Brother MFC-7820N Laser Printer Logo

5,047 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

James Cagle
James Cagle

Level 2 Expert

454 Answers

Samyfam
Samyfam

Level 3 Expert

379 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...