Question about Intel DG31PR Motherboard

1 Answer

I cannot see video my computer - Intel DG31PR Motherboard

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

As you might know, there is a whole lot of problems which can cause this symptom, hence, we can start at the more basic solutions, if it doesn't work, we can try more unusual scenarios.

Firstly, if you get your video from your video card, you might want to try to plug your screen into your on board VGA port.

If this does not work, your motherboard might have blown, if it works, your graphics card is the problem.

Because, even though the drivers for the card is not installed, the visuals should still work, hence, not a software problem.

Try the above, let me know if it works.

kind regards
Andrea

Posted on Aug 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drivers Handycam DCR TRV22e


The USB streaming driver for the Camcorder is not available for Windows Vista OS from Sony at this point. Hence it is not possible to transfer videos using USB interface. You may use i.LINK or A/V interface to transfer videos from the Camcorder to the Computer which is running on Windows Vista Operating System.



Please follow the steps to transfer video to a computer using an i.LINK connection (IEEE 1394).



IMPORTANT: Video capture software and a compatible video capture card must be installed on the computer. Depending on the computer manufacturer, various video capture cards and software (Adobe Premiere, Roxio Video Wave, Microsoft Windows Movie Maker, etc.) may be available or already installed on your computer. If necessary, contact the manufacturer of your computer for further information.




NOTE: Many Sony VAIO computers are bundled with Sony DVgate Motion or DVgate Plus software for video capturing. Some VAIO computers also include Click To DVD software that will allow video capture to the computer hard drive or directly to a DVD.

  1. Connect an i.LINK cable (also known as IEEE 1394) to the i.LINK port on the digital camcorder.

  2. i.LINK Cable.
  3. clip_image001.jpg


    i.LINK port.


    clip_image002.jpg

    1. Connect the other end of the i.LINK cable to the computer.

    NOTE: The computer i.LINK ports and capture cards may have either 4-pin or 6-pin connections. Sony digital camcorders use i.LINK ports with 4 pins. If your computer only has a 6-pin i.LINK port, then it will be necessary to use a 4-pin to 6-pin i.LINK cable.

    1. Turn on the digital camcorder by moving the POWER switch to the VTR position.
    2. Cue the camcorder tape to the beginning of the video footage.
    3. Turn on the computer.
    4. Start the video capture software on the computer.
    5. Begin playing the recorded video in the camcorder.
    6. Begin importing the video with the capture software.

    It should now be possible to copy the video using the video capture software if the computer hardware and software are configured correctly.

Jun 23, 2012 | Sony Handycam DCR-TRV22E Mini DV Digital...

1 Answer

How install with windows 7


The USB streaming driver for the Camcorder is not available for Windows 7 OS from Sony at this point. Hence it is not possible to transfer videos using USB interface. You may use i.LINK or A/V interface to transfer videos from the Camcorder to the Computer which is running on Windows 7 Operating System.


Please follow the steps to transfer video to a computer using an i.LINK connection (IEEE 1394).


IMPORTANT: Video capture software and a compatible video capture card must be installed on the computer. Depending on the computer manufacturer, various video capture cards and software (Adobe Premiere, Roxio Video Wave, Microsoft Windows Movie Maker, etc.) may be available or already installed on your computer. If necessary, contact the manufacturer of your computer for further information.

NOTE: Many Sony VAIO computers are bundled with Sony DVgate Motion or DVgate Plus software for video capturing. Some VAIO computers also include Click To DVD software that will allow video capture to the computer hard drive or directly to a DVD.

  1. Connect an i.LINK cable (also known as IEEE 1394) to the i.LINK port on the digital camcorder.


i.LINK Cable.

1_8_2012_11_50_04_pm.jpg

i.LINK port.

1_8_2012_11_49_45_pm.jpg



  1. Connect the other end of the i.LINK cable to the computer.

NOTE: The computer i.LINK ports and capture cards may have either 4-pin or 6-pin connections. Sony digital camcorders use i.LINK ports with 4 pins. If your computer only has a 6-pin i.LINK port, then it will be necessary to use a 4-pin to 6-pin i.LINK cable.

  1. Turn on the digital camcorder by moving the POWER switch to the VTR position.
  2. Cue the camcorder tape to the beginning of the video footage.
  3. Turn on the computer.
  4. Start the video capture software on the computer.
  5. Begin playing the recorded video in the camcorder.
  6. Begin importing the video with the capture software.

It should now be possible to copy the video using the video capture software if the computer hardware and software are configured correctly.

Jan 08, 2012 | Sony DCR-TRV285E Digital-8 Digital...

1 Answer

I NEED DRIVER OF HANDY CAM SONY TRV265E


The USB streaming driver for the Camcorder is not available for Windows 7 OS from Sony at this point. Hence it is not possible to transfer videos using USB interface. You may use i.LINK or A/V interface to transfer videos from the Camcorder to the Computer which is running on Windows 7 Operating System.


Please follow the steps to transfer video to a computer using an i.LINK connection (IEEE 1394).


IMPORTANT: Video capture software and a compatible video capture card must be installed on the computer. Depending on the computer manufacturer, various video capture cards and software (Adobe Premiere, Roxio Video Wave, Microsoft Windows Movie Maker, etc.) may be available or already installed on your computer. If necessary, contact the manufacturer of your computer for further information.

NOTE: Many Sony VAIO computers are bundled with Sony DVgate Motion or DVgate Plus software for video capturing. Some VAIO computers also include Click To DVD software that will allow video capture to the computer hard drive or directly to a DVD.

  1. Connect an i.LINK cable (also known as IEEE 1394) to the i.LINK port on the digital camcorder.


  1. Connect the other end of the i.LINK cable to the computer.

NOTE: The computer i.LINK ports and capture cards may have either 4-pin or 6-pin connections. Sony digital camcorders use i.LINK ports with 4 pins. If your computer only has a 6-pin i.LINK port, then it will be necessary to use a 4-pin to 6-pin i.LINK cable.

  1. Turn on the digital camcorder by moving the POWER switch to the VTR position.
  2. Cue the camcorder tape to the beginning of the video footage.
  3. Turn on the computer.
  4. Start the video capture software on the computer.
  5. Begin playing the recorded video in the camcorder.
  6. Begin importing the video with the capture software.

It should now be possible to copy the video using the video capture software if the computer hardware and software are configured correctly.



i.LINK Cable.


1_1_2012_10_42_23_pm.jpgi.LINK port.
1_1_2012_10_42_43_pm.jpg

Jan 01, 2012 | Sony Handycam DCR-TRV265E Digital...

1 Answer

DRIVER WIN 7


The USB streaming driver for the Camcorder is not available for Windows 7 OS from Sony at this point. Hence it is not possible to transfer videos using USB interface. You may use i.LINK or A/V interface to transfer videos from the Camcorder to the Computer which is running on Windows 7 Operating System.


Please follow the steps to transfer video to a computer using an i.LINK connection (IEEE 1394).


IMPORTANT: Video capture software and a compatible video capture card must be installed on the computer. Depending on the computer manufacturer, various video capture cards and software (Adobe Premiere, Roxio Video Wave, Microsoft Windows Movie Maker, etc.) may be available or already installed on your computer. If necessary, contact the manufacturer of your computer for further information.

NOTE: Many Sony VAIO computers are bundled with Sony DVgate Motion or DVgate Plus software for video capturing. Some VAIO computers also include Click To DVD software that will allow video capture to the computer hard drive or directly to a DVD.

  1. Connect an i.LINK cable (also known as IEEE 1394) to the i.LINK port on the digital camcorder.


  1. Connect the other end of the i.LINK cable to the computer.

NOTE: The computer i.LINK ports and capture cards may have either 4-pin or 6-pin connections. Sony digital camcorders use i.LINK ports with 4 pins. If your computer only has a 6-pin i.LINK port, then it will be necessary to use a 4-pin to 6-pin i.LINK cable.

  1. Turn on the digital camcorder by moving the POWER switch to the VTR position.
  2. Cue the camcorder tape to the beginning of the video footage.
  3. Turn on the computer.
  4. Start the video capture software on the computer.
  5. Begin playing the recorded video in the camcorder.
  6. Begin importing the video with the capture software.

It should now be possible to copy the video using the video capture software if the computer hardware and software are configured correctly.



Jan 01, 2012 | Sony Handycam DCR-TRV265E Digital...

1 Answer

I should connect my Sony DCR-HC23E DV Digital Camcorder with a PC windows 7 ultimate USB port. I can't find drivers for compatibility


The USB streaming driver for the Camcorder is not available from Sony at this point. Hence it is not possible to transfer videos using USB interface. You may use i.LINK or A/V interface to transfer videos from the Camcorder to the Computer which is running on Windows 7 Operating System.


Please follow the steps to transfer video to a computer using an i.LINK connection (IEEE 1394).
IMPORTANT: Video capture software and a compatible video capture card must be installed on the computer. Depending on the computer manufacturer, various video capture cards and software (Adobe Premiere, Roxio Video Wave, Microsoft Windows Movie Maker, etc.) may be available or already installed on your computer. If necessary, contact the manufacturer of your computer for further information.
NOTE: Many Sony VAIO computers are bundled with Sony DVgate Motion or DVgate Plus software for video capturing. Some VAIO computers also include Click To DVD software that will allow video capture to the computer hard drive or directly to a DVD.

  1. Connect an i.LINK cable (also known as IEEE 1394) to the i.LINK port on the digital camcorder.

shajanrs_52.jpg

i.LINK Cable.



i.LINK port.

shajanrs_53.jpg

  1. Connect the other end of the i.LINK cable to the computer.

NOTE: The computer i.LINK ports and capture cards may have either 4-pin or 6-pin connections. Sony digital camcorders use i.LINK ports with 4 pins. If your computer only has a 6-pin i.LINK port, then it will be necessary to use a 4-pin to 6-pin i.LINK cable.

  1. Turn on the digital camcorder by moving the POWER switch to the VTR position.
  2. Cue the camcorder tape to the beginning of the video footage.
  3. Turn on the computer.
  4. Start the video capture software on the computer.
  5. Begin playing the recorded video in the camcorder.
  6. Begin importing the video with the capture software.

It should now be possible to copy the video using the video capture software if the computer hardware and software are configured correctly.


Feb 26, 2011 | Sony DCR-HC23E DV Digital Camcorder

1 Answer

I NEED DRIVER SONY HANDYCAM DCR TRV22 WINDOWS 7


The USB streaming driver for the Camcorder is not available for Windows 7 OS from Sony at this point. Hence it is not possible to transfer videos using USB interface. You may use i.LINK or A/V interface to transfer videos from the Camcorder to the Computer which is running on Windows 7 Operating System.


Please follow the steps to transfer video to a computer using an i.LINK connection (IEEE 1394).


IMPORTANT: Video capture software and a compatible video capture card must be installed on the computer. Depending on the computer manufacturer, various video capture cards and software (Adobe Premiere, Roxio Video Wave, Microsoft Windows Movie Maker, etc.) may be available or already installed on your computer. If necessary, contact the manufacturer of your computer for further information.

NOTE: Many Sony VAIO computers are bundled with Sony DVgate Motion or DVgate Plus software for video capturing. Some VAIO computers also include Click To DVD software that will allow video capture to the computer hard drive or directly to a DVD.

  1. Connect an i.LINK cable (also known as IEEE 1394) to the i.LINK port on the digital camcorder.


i.LINK Cable.


shajanrs_37.jpg


i.LINK port.


shajanrs_38.jpg

  1. Connect the other end of the i.LINK cable to the computer.

NOTE: The computer i.LINK ports and capture cards may have either 4-pin or 6-pin connections. Sony digital camcorders use i.LINK ports with 4 pins. If your computer only has a 6-pin i.LINK port, then it will be necessary to use a 4-pin to 6-pin i.LINK cable.

  1. Turn on the digital camcorder by moving the POWER switch to the VTR position.
  2. Cue the camcorder tape to the beginning of the video footage.
  3. Turn on the computer.
  4. Start the video capture software on the computer.
  5. Begin playing the recorded video in the camcorder.
  6. Begin importing the video with the capture software.

It should now be possible to copy the video using the video capture software if the computer hardware and software are configured correctly.



Feb 08, 2011 | Sony Video Cameras

1 Answer

My computer operating system is vista, it unable to recognise the the sony handycam DCR-HC40E, although i downloaded the update. thank you. e-mail: dralifrcs@yahoo.com


The USB streaming driver for the Camcorder is not available for Windows Vista OS from Sony at this point. Hence it is not possible to transfer videos using USB interface. You may use i.LINK or A/V interface to transfer videos from the Camcorder to the Computer which is running on Windows Vista Operating System.


Please follow the steps to transfer video to a computer using an i.LINK connection (IEEE 1394).


IMPORTANT: Video capture software and a compatible video capture card must be installed on the computer. Depending on the computer manufacturer, various video capture cards and software (Adobe Premiere, Roxio Video Wave, Microsoft Windows Movie Maker, etc.) may be available or already installed on your computer. If necessary, contact the manufacturer of your computer for further information.

NOTE: Many Sony VAIO computers are bundled with Sony DVgate Motion or DVgate Plus software for video capturing. Some VAIO computers also include Click To DVD software that will allow video capture to the computer hard drive or directly to a DVD.

  1. Connect an i.LINK cable (also known as IEEE 1394) to the i.LINK port on the digital camcorder.


i.LINK Cable.


shajanrs_60.jpg


i.LINK port.


shajanrs_61.jpg

  1. Connect the other end of the i.LINK cable to the computer.

NOTE: The computer i.LINK ports and capture cards may have either 4-pin or 6-pin connections. Sony digital camcorders use i.LINK ports with 4 pins. If your computer only has a 6-pin i.LINK port, then it will be necessary to use a 4-pin to 6-pin i.LINK cable.

  1. Turn on the digital camcorder by moving the POWER switch to the VTR position.
  2. Cue the camcorder tape to the beginning of the video footage.
  3. Turn on the computer.
  4. Start the video capture software on the computer.
  5. Begin playing the recorded video in the camcorder.
  6. Begin importing the video with the capture software.

It should now be possible to copy the video using the video capture software if the computer hardware and software are configured correctly.



Feb 07, 2011 | Sony Handycam DCR-HC40E Mini DV Digital...

1 Answer

My camcorder wont be seen by the usb connection to my windows 7 laptop?


The USB streaming driver for the Camcorder is not available for Windows 7 OS from Sony at this point. Hence it is not possible to transfer videos using USB interface. You may use i.LINK or A/V interface to transfer videos from the Camcorder to the Computer which is running on Windows 7 Operating System.


Please follow the steps to transfer video to a computer using an i.LINK connection (IEEE 1394).


IMPORTANT: Video capture software and a compatible video capture card must be installed on the computer. Depending on the computer manufacturer, various video capture cards and software (Adobe Premiere, Roxio Video Wave, Microsoft Windows Movie Maker, etc.) may be available or already installed on your computer. If necessary, contact the manufacturer of your computer for further information.

NOTE: Many Sony VAIO computers are bundled with Sony DVgate Motion or DVgate Plus software for video capturing. Some VAIO computers also include Click To DVD software that will allow video capture to the computer hard drive or directly to a DVD.

  1. Connect an i.LINK cable (also known as IEEE 1394) to the i.LINK port on the digital camcorder.

Connect the other end of the i.LINK cable to the computer.

NOTE: The computer i.LINK ports and capture cards may have either 4-pin or 6-pin connections. Sony digital camcorders use i.LINK ports with 4 pins. If your computer only has a 6-pin i.LINK port, then it will be necessary to use a 4-pin to 6-pin i.LINK cable.

  1. Turn on the digital camcorder by moving the POWER switch to the VTR position.
  2. Cue the camcorder tape to the beginning of the video footage.
  3. Turn on the computer.
  4. Start the video capture software on the computer.
  5. Begin playing the recorded video in the camcorder.
  6. Begin importing the video with the capture software.

It should now be possible to copy the video using the video capture software if the computer hardware and software are configured correctly.





shajanrs_19.jpg

Jan 26, 2011 | Sony DCR-HC19E Mini DV Digital Camcorder

1 Answer

I cannot copy the video file from my sony dcr-hc32 to my computer with windows vista


The USB streaming driver for theCamcorder is not available from Sony at this point. Hence it is not possible totransfer videos using USB interface. You may use i.LINK or A/V interface totransfer videos from the Camcorder to the Computer which is running on WindowsVista Operating System. Please follow the steps to transfer video to a computerusing an i.LINK connection (IEEE 1394).

IMPORTANT: Video capture software and a compatible video capture card mustbe installed on the computer. Depending on the computer manufacturer, variousvideo capture cards and software (Adobe Premiere, Roxio Video Wave, MicrosoftWindows Movie Maker, etc.) may be available or already installed on yourcomputer. If necessary, contact the manufacturer of your computer for furtherinformation. NOTE: Many Sony VAIO computers are bundled with Sony DVgate Motion or DVgatePlus software for video capturing. Some VAIO computers also include Click ToDVD software that will allow video capture to the computer hard drive ordirectly to a DVD.
  1. Connect an i.LINK cable (also known as IEEE 1394) to the i.LINK port on the digital camcorder.
i.LINKCable.
rsshajan_22.jpg


i.LINKport.
rsshajan_23.jpg
  1. Connect the other end of the i.LINK cable to the computer.
NOTE: The computer i.LINK ports and capture cardsmay have either 4-pin or 6-pin connections. Sony digital camcorders use i.LINKports with 4 pins. If your computer only has a 6-pin i.LINK port, then it willbe necessary to use a 4-pin to 6-pin i.LINK cable.
  1. Turn on the digital camcorder by moving the POWER switch to the VTR position.
  2. Cue the camcorder tape to the beginning of the video footage.
  3. Turn on the computer.
  4. Start the video capture software on the computer.
  5. Begin playing the recorded video in the camcorder.
  6. Begin importing the video with the capture software.
It should now be possible to copy the video usingthe video capture software if the computer hardware and software are configuredcorrectly.

Dec 08, 2010 | Sony Video Cameras

1 Answer

What do i need to use t3500 to watch tv


  • 1

    Determine what kind of video line-in connection the TV has. These connections are typically on the back or side of the TV. You also will need to determine what kind of video line-out connection the computer has.

    Types of video connections include S-Video, VGA, DVI and HDMI. The Resources section of this article offers links to sites that will help you identify the connection type of your TV and computer.

  • 2

    Purchase a video connection cable that is for the type of connection that the computer and TV share. For example, if the TV and computer both have S-Video ports, you should purchase an S-Video cable. S-Video connections are the most common and least expensive option.

  • 3

    Connect the end of the S-Video cable that matches the connection on the computer to the computer video line-out port. Connect the other end to the video line-in port of the same kind on the TV.

  • 4

    Convert video from VGA video to S-Video or even component video. Do this if the two connection ports on the computer and TV are not compatible. You will need to purchase a scan converter box, a VGA video cable, and either an S-Video or component video cable. Connect the cable that will connect to the computer jack to the computer and the converter box, and connect the S-Video or component video cable to the TV and the converter box.

  • 5

    Turn on the TV and use the remote control to select "Input." Some TVs will have multiple selections. Turn on the computer and play a movie or display an image on the screen. As you are scrolling through the "Input" options on the television, you will see a matching image of what you opened on your computer on the TV screen when the correct input is selected.

  • 6

    Adjust the screen resolution on the computer if the image on the TV is distorted, too small or too large. Do this by going into Control Panel and Display Settings on the computer. Select a different screen resolution until the image on the TV fits the TV screen

  • Oct 28, 2010 | Dell Precision T3500 Computer Workstation...

    Not finding what you are looking for?
    Intel DG31PR Motherboard Logo

    Related Topics:

    45 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Intel Computers & Internet Experts

    Tony

    Level 3 Expert

    2600 Answers

    David
    David

    Level 3 Expert

    778 Answers

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...