Question about Neff U1421 Double circotherm Electric Oven

1 Answer

Main oven door will not close properly. Is there any adjustment for it.

Posted by on

  • bupi May 21, 2008

    my neff oven door will not shut properly and so it loses heat...please help me!

  • Anonymous Sep 25, 2008

    Oven door appears a close fit one side but top right has much movement and heat escapes.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Neff Master
  • 3,463 Answers

This comment applies to most electric ovens that have drop down doors with hinges at the bottom.
The hinges are not adjustable, and in every case the problem is caused by one or both hinge springs being weak.
The only solution, is to replace both oven door hinges together.

Posted on Jan 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello, I have a Turbochef tornado oven, while operation i am getting a Fault code Close door error and it keeps on coming while closing the door with a beep . Can anyone please try to resolve the error...


seems like your primary switch isn't closed correctly or it might bad.
step to trouble shoot
OVEN HAS 5000 VOLTS MOVING INTO IT PLEASE BE CAREFULL
1.press back key to turn off the oven.
2.Open left side pannel.
3.press 'back' and 'enter' key together.Then, enter 9428 and then press enter.
4.You will be directing to an testing screen.At the bottom of thetesting screen there are many alphabets.In which you can see 'P' ,'S' and 'M' .
5.Open the door and watch what happened to alphabet 'P'.I meant to say that when door open alphabet will highlited ,and when closed its seems an regular 'P'
6.open door and close the door .And also keep an eye on the primary switch at the top left corner of the oven where the door latches engaged.If it engaged very nicely and you still see an highlited 'P' in the testing screen then REPLACE THE PRIMARY SWITCH OR IF SWITCH IS OKAY THEN CHEK THE WIRING UPTO MAIN BOARD.
7.If switch doesn't latches properly then adjust switch ,by lossning the screw and aligned it properly.
PLEASE LET ME KNOW IF YOU KNOW HOW TO USE MULTIMETER,SO I CAN EXPLAIN YOU HOW TO CHECK THE SWITCH.
ALSO PLEASE RATE MY ANSWER.
THANKS

May 12, 2011 | TurboChef TORNADO Electric Oven

2 Answers

Both oven doors do not close properly. lights stay on & can't heat properly with doors not closing tight. is there an adjustment for these doors?


We have similar Jen Air double oven and with the same problem but only on the lower oven. The doors are interchangeable and the top door fits fine but the lower door will not close completely at the top. It does turn out the light but has never cooked properly. I checked with several appliance repair shops and the hinges are not adjustable, but since one door closes and our other doesn't it is not a hinge problem, just a defective design.

We let this go too long and are out of warranty so I doubt Jennair is going to do anything. I hope someone post a solution but it is clearly not problem with the henges but with the receptacle they go into.

Jan 04, 2011 | Jenn-Air WW27430P Stainless Steel Electric...

1 Answer

The door on the main oven doesn't close properly. i think its a hinge problem rather than a seal problem.


Check the small screws in the door where the hinge goes into it. If they are tight then it is possibly the other end of the hinge. Unfortunately, to get to that you will need to take the oven out of its housing and then take the side panels off to gain access to the hinges.

Nov 23, 2010 | Stoves 720EF Electric Double Oven

2 Answers

Neff u1661n2gb/05. main oven not working and shorts out electric when try to switch on. top oven works no problem


I had a problem similar. The bottom oven stopped working and the left hand set of controls and clock died. I had three figure quotes for repair. I took the main control unit out from behind the switches, its a pain to do. I took pictures of where the wires went to save confusion later. I removed the main switch unit from the control unit by gently pushing back the inbuilt plastic clips. dont loose the small white connector piece on the end of the switch shaft. I gently pulled the switch knobs from the front then the knob extensions through the same holes. once the unit was out I turned it upside down I could see where two solder tracks on the circuit board had burnt out. I gently cleaned them up and bridged the gap with two short tinned pieces of single core wire I had stripped. I used a soldering gun as it gets really hot really fast and wouldnt damage the components underneath. the only fiddly bit when putting it back together was locating the bottom edge of the control unit in the little gulley, I had to bend the edge of the gulley down to make it easier. Once it was all back together it worked. Half an hour and I saved £300! Now I have to fix the hinges on the bottom oven door as it doesnt shut properly at the top. Any ideas anyone?

Nov 16, 2010 | Neff U1661 Double circotherm super...

2 Answers

The door of the main oven does not close properly even though we replaced the hinges (which worked initially) only about 18months ago. It's a U1420 NOGB double oven


If ther is notjhing obstructing the door from closing poroperly, then it sounds to me like the hinges are the cause of the problem again.
Make sure there is nothing trapped at the bottrom of the door, and that the hinge/s are not loose.
If it is leaving a small gap at the top of the door, then I think your only option is to replace the hinges again, as there is no adjustment possible of the hinges.
Hope this assists you with your problem

Dec 03, 2009 | Neff Ovens

3 Answers

My oven door does not close tight


These hinges are now obsolete and you cannot get them anywhere. The poblem with this type of hinge is not with weak springs or anything like that, it is with the pivot pin in the door hinge. Follow these instructions and it will not cost you anything for the repair.
It is best to remove the oven from the housing. Remove both sides of the oven panels, you have to remove the top first, then the sides (remove about 20 screws all together). Support the bottom oven door first by tying a bit of string between the bottom and top oven door hand rails. This will stop the door falling down when you remove the springs. unhook the springs and the door will just slide out. (Use a loop of string attached to the back end of the spring to pull it from its holes.)
Dismantle the door by removing the screws. You will probably find that the the hinge pivot pins have come away from the U shaped hinge bracket. The secret is to make sure that these are fixed firm back into the bracket. What I did was to nip the U hinge bracket in a vice, (or use pliers) so that the pin will now protude slightly each side of the bracket. This allows more surface bearing area so the pin will not pull itself out of the hinge. To further make sure, I glued the ends of the pin with epoxy resin.
Then reassemble.
My door now feels like a new one even though it is 15 years old.

Sep 16, 2009 | Stoves 720EF Electric Double Oven

3 Answers

Kitchenaid Superba microwave oven combo close door error


turn off the main power outlet it will work.

Feb 09, 2009 | Ovens

1 Answer

Slack oven door on Tecnik 8085


The hinges cannot be adjusted, the only solution is to replace both hinges.
Plz rate my comments.
Thankyou..

Jan 05, 2009 | Tecnik Ovens

1 Answer

Bakers pride pizza oven not lighting


Hello. Usually this problem is related to the pilot being dirty, and not heating the bulb for the safety device properly/hot enough to fully open the valve. If you have a general purpose mini torch you can heat the metal bulb near the pilot with it, if this is the problem, the safety will open, and the main burner will come on. CAREFUL, you are not on/around the main burner, as it will allow gas to come on to the main burner, and if your pilot is not working properly, might not light the gas. Get the pilot cleaned and adjusted.

or... :) I know... your safety has failed, allowing gas to the pilot, but internally is not opening, this requires replacement. Last though, it could be your thermostat, its last in line, and would require replacement. The safety, and the thermostat are mechanical valves, open or closed depending on its function.

If you have a more current type, they will have a combination valve, and thermopile/thermocouple that are electromechanical, your thermostat at this point can be either mechanical, or electromechanical. This system has a few more possible causes for your symptom.
You can tell which you have by how you light the pilot, have a red button on the front of the unit, by the on/off valve? this is the first type.
Have to open a small door to access a knob, turn it to pilot, and hold in? this is the latter type.
ask if you need more help.
Hope that helps, and thank you.

Dec 17, 2008 | Bakers Pride Y-600 Gas Single Oven

Not finding what you are looking for?
Neff U1421 Double circotherm Electric Oven Logo

1,328 people viewed this question

Ask a Question

Usually answered in minutes!

Top Neff Ovens Experts

bosch5

Level 2 Expert

157 Answers

paulcarew

Level 3 Expert

1915 Answers

xxxxxx xxx

Level 3 Expert

4706 Answers

Are you a Neff Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...