Question about Lenovo Computers & Internet

1 Answer

System boots up but no image on monitor i have checked the monitor it works fine both fans are working no beeps no image what could the problem be

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 223 Answers

Sounds like your power supply is toast, or your video card is improperly seated in its slot. or maybe its simpler than that , how many video ports are on the back, check your monitor cable to the computer, try other VGA ports if they exist. ( need to boot it after the connection is made)

Posted on Aug 27, 2010

  • Trevor Groves
    Trevor Groves Aug 28, 2010

    Does my response answer your question? do you need further clarification or help? Please use the solution rating if your problem has been solved, or make a note if your still having trouble.
    Thanks! Gurvy

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My computer does not starts up. When i switch on, then I here i beap, hard drive red power light ons, hard drive try to rotate, i here some little noise there, After that the processor fan only spinns but...


yes.need more info.
check monitor is working fine
then check another beep coming
if monitor is fine,then check it's power led on,off,or on and off state.
replace main board battery.
try remove rams and boot again.if no beeps then you gotta problem in main board.


Support Me By Signup HERE

Nov 15, 2010 | Computers & Internet

1 Answer

After moving PC, it starts to boot up - shuts off before complete


CHECK YOUR SYSTEM SMPS or power card.

If this answer is helpful, please rate this.

Feb 25, 2010 | Gateway 310S (2900621) PC Desktop

1 Answer

Pc powers on but no display(light on board and fan is working)


Could be a loose Display Card... pretty rare that would happen if the System has been working fine. An event would have to occur to knock it out.
The PC should boot to the BIOS with everything unplugged in the System. Try to re-seat the Display Card first if not, unplug the Hard Drive to see if that is causing the issue. If you have an On-Board Video... pull the Display Card to see if you get a Boot.
Pull Modem as well...
If it were Memory you would get a beep. Wouldn't hurt to clean and re-seat Mem as well while your in there. Dust does cause errors because of poor connections. :)

Jan 07, 2010 | Shuttle (sn41g2b (black)) PC Desktop

1 Answer

When I power up computer, I get 2 very rapid beeps, pause, 6 beep


it depends on the beeping
but i guess it's ur graphic card
make sure that the card is firmly in place and also check the memory modules.

Sep 14, 2009 | Sony VAIO RB30C (VGCRB30) PC Desktop

1 Answer

No display on monitor


this lead to cpu overheating problem
clean your cpu fan and put some thermal grease between the fan and cpu

Jul 17, 2009 | Foxconn NF4K8AC-RS-1.0 Motherboard

1 Answer

My E-Machines desktop just stopped working. A few weeks ago, my user was corrupted so I had to do a system restore to get to my data on hard drive. Did that and backed up to external drive and it worked...


that beep means POST.. your computer hardware is fine .. please just re install the operating systemm... before that you might want to back up the hard drive data using bartpe or some tools similar to that.. if you dont have that expertise. just re install the operating system .. you should get back to work...

remember beep meaning POST meaning your hardware is fine.. the operating system is just corrupted / broekn

May 13, 2009 | E-Machines eMachines Desktop PC

1 Answer

No display on computer


First thing is do you have a beep when the system boots? Sounds like you may have a BIOS issue I would start there........your RAM and processor are more than likely NOT the problem

Apr 15, 2009 | HP Pavillion a818n Desktop PC (Refurb)...

1 Answer

System will not start


hai

check the cmos battery and ram first

then clean the ram slots and ram leads.

refix the prossor and fan

Sep 08, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lenovo Computers & Internet Experts

Michael Vincent Cruz

Level 3 Expert

868 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Lenovo Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...