How to stop red blinking "paper"? couldn't stop

Epson printer blinks both red and green lights, which means the paper gets jammed in your Epson printer. You can fix the issue using the steps:

·Check printer ink cartridge
·Check the printer print head and fuser
·Fix the paper jammed

Follow the steps to fix Epson printer lights blinking error.

Every time there is paper jam, the printer knows the job is not completed and hence tries to re-print after the paper is removed and cover is shut.

Clear the print job from computer.
Power off the printer and Clear the paper jam (if any)
I would try to use different tray. The paper pickup roller in one path may be worn out.
eg Sheet feeder or multipurpose tray.
Load paper in new tray
Set the application to use new tray

Ensure you sue the right thickness (gsm) of the paper. Quality of paper is crucial. Too thin; too thick can affect functioning.

Dear
Pl. select the paper size ( as mentioned on the paper packet) on computer on click START-PRINTER AND FAXES(new window opened)-(right click on printer icon) PRINTING PREFERENCE(new window opened)-select PAPER -paper option (here the paper size to be selected- APPLY. This may set the paper size default.
Thanks.

Dear Sir,

By analyzing your printer paper jam problem,it deffinately due to paper piece or dust particle wrapped to the the printer page roller.So check your printer keenly for any paper piece or any other obstacle disturbing printer roller and clean dust wrapped on printer roller with brush.Then turn on the printer give the page to the printer,care must be taken that page inserted is must be straight.then give the print. It definitely solves your problem.if you have any problem regarding this issue comment your problem with more information,we will glad to assist you.

good luck

thanking you for choosing fixya

dear sir

1. it is problem paper miss feed
2. over temparature

clean thermostator.thermostator over dry toner
or cartridge assembling problem

its not the problem of toner cartridge.its the problem of gears which pulls the paper they r worn out or may be cracked internally.exactly what happens when you u give the print for the first time the printer gets command and the gears starts spinning and the paper gets pulled because it gets a pressure internally and after 2 pages that pressure gets low and it stops pulling the paper.some times changing the paper thickness solves the problem temporvarily .i mean use the thick quality paper instead of thin.

Solution: Bought a new printer.

It turned out to be a paper jam. I was getting the wrong msg from the printer. I notice that U have charged my bank acct. 4 BOTH of ur plans, Since I solved the problem myself, pls rescind these charges. Thank you. jrfoley1@ juno.com

turn it off..let it set for 4 min..and then turn it on..try a test page first, though

hi, mezz

try this

There are 2 different types of flashing patterns with those two lights on the printer.
***
Resume light and power light BLINKING ALTERNATELY
Problem: Paper is jammed in the printer.
***
Resume blinking SIMULTANEOUSLY with power light

Problem:
The print cartridge carriage is stuck.

Solution:
1. Open the top of the printer.
2. Remove anything that is blocking the carriage path.
3. Turn the printer off.
4. Turn the printer on.

Problem:
There is something wrong with the printer. (I didn't write it, I am pulling this from actual HP tech documents, so don't blame me on this one) :)
Solution:
Turn the printer off.
Turn the printer on.
If the printer will not turn off, unplug the power cable from the electrical outlet or wall outlet.
Unplug the power cord from the back of the printer.
Wait about 30 seconds.
Plug the power cord back into the wall outlet.
Plug the power cord to the back of the printer.


oke, post in me back

tq
cropp