Question about Armitron Watches

1 Answer

I bought a ladies armitron watch.. and can't reset time.. day etc is fine.. the symbols left hand side say 'set' 'mode' right hand side 'ADJ' 'AL' ... can you help.. Thanks Leanne

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 831 Answers

Thank you for contacting FixYa.

  • Look at your watch as if it were a clock face, even though it may be a digital. Most Armitron watches have four buttons around the perimeter of the watch. There will be a button at the 2 o'clock position; this will be button "A." There will also be a button at the 4 o'clock position. Consider this button "B." On the opposite side will be button "C" at the 8 o'clock position and button "D" at 10 o'clock.
  • Press the "D" button until the numbers begin to flash on your digital watch. Press and hold the "D" button again until the seconds begin to flash by themselves. Press the "B" button to advance the seconds. You may hold down the button in order to cycle through the numbers faster.
  • Hold down the "A" button in order to move on to setting the Armitron minutes. Once they begin flashing, press the "B" button just like you did to adjust the seconds. Press the "A" button one more time, and you will see the hours flash on your watch face. Hold down the "B" button and cycle through, making sure the a.m. and p.m. is correct.
  • Change the date on your Armitron watch by once again pressing the "A" button. This should cause your date to blink. Press the "B" button to change the days.
  • Cycle through the months by pressing the "A" button one final time and holding down the "B" button.
  • Posted on Aug 27, 2010

    1 Suggested Answer

    6ya6ya
    • 2 Answers

    SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

    Hi,
    a 6ya expert can help you resolve that issue over the phone in a minute or two.
    best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
    the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
    click here to download the app (for users in the US for now) and get all the help you need.
    goodluck!

    Posted on Jan 02, 2017

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    How to set the wr330 watch lost instructions.


    On the face of the watch, there are four buttons arranged around the circle of the watch face in four positions. Starting with the upper left hand button (labelled SET), and working clockwise around the face of the watch (to ADJ., EL, and MODE), I'll label the buttons "A", "B", "C", and "D".

    In other words...
    Button "A" is the button labelled "SET" in the upper left hand corner of the watch.
    Button "B" is the button labelled "ADJ." in the upper right hand corner of the watch.
    Button "C" is the button labelled EL in the lower right hand corner of the watch.
    Button "D" is the button labelled "MODE" in the lower left hand corner of the watch.

    Setting the Time.
    1. Press and hold D as if you were setting the alarm. As above, the stopwatch will momentarily appear and then after 2 seconds the alarm time will appear with the hour flashing.
    2. Press and release D and the seconds on the time of day will begin to flash.
    3. Press and release B to reset the seconds to zero provided they are below 30. If they are above 30, the seconds will reset and the minutes of the time of day will advance by one.
    4. Press and release A to change from flashing seconds to flashing minutes/flashing hours/flashing day of the month/flashing month of the year/flashing day of the week. In each flashing mode, pressing and releasing B advances the value by one unit.
    5. Press and release D to exit time setting mode.

    Mar 16, 2011 | Armitron Digital Sport #45/6967PNK Watch

    2 Answers

    My watch is stuck on military time somehow. I would like to know how to change it back to normal time. My watch is a Armitron Alarm/Chrono WR 165 sports watch. The number on the back is 45/6915. Thanks for...


    Welcome to Fixya,


    The Armitron WR165 is a digital watch that includes a 24-hour alarm, hourly chime, stopwatch feature, countdown timer and is water resistant up to 165 feet. With a rubber wristband and rugged style, the watch is meant for outdoor enthusiasts and athletes. The WR165 can be found online, in some sporting supply stores and in certain department or general home stores. Setting the Armitron WR165 only takes a few steps to perform properly.


    1 - Push the top button on the left-hand side of the watch until the seconds flash on the display.Press the top button on the right-hand side to zero the seconds.


    2 - Push the bottom button on the left-hand side of the watch until the hours flash and then the top button on the right-hand side of the watch to increase the hour on the watch display. Note that "PM" will appear on the watch display for PM times, but there is no "AM" indicator on the display.


    3 - Press the bottom button on the left-hand side of the watch until the minutes flash on the display.Press the top button on the right-hand side of the watch to increase the minutes on the display.


    4 - Repeat to set the month, date and weekday on the watch. Press the top button on the left-hand side of the watch to return to time mode.


    5 - Press the bottom button on the left-hand side of the watch to enter the stopwatch mode. Press the top button on the right-hand side of the watch to start the timer. Press one more time to stop timing. Press the top button on the left-hand side of the watch to reset the stopwatch to zero and the bottom button on the left-hand side of the watch to return to time mode.


    6 - Press the bottom button on the left-hand side of the watch twice to set the alarm. Press the top button on the left-hand side of the watch until the hours flash on the display. Press the bottom button on the left-hand side of the watch until the alarm number flashes. Press the top button on the right-hand side of the watch to choose Alarm Time 1 or Alarm Time 2. Push the bottom button on the left-hand side of the watch again until the hours flash. Push the top button on the right-hand side of the watch to choose the alarm hour, followed by the bottom button on the left-hand side of the watch to change to minutes. Press the top button on the right-hand side of the watch to advance the alarm minutes. Press the top button on the left-hand side of the watch to set the alarm time and the bottom button on the left-hand side of the watch to return to time mode.

    I hope this will help you.

    Thank you for usinf Fixya.

    Feb 21, 2011 | Watches

    1 Answer

    How do i set the time and date on my watch?


    Hi,

    This is direct link to all ARMITRON watch manuals/instructions: http://www.armitron.com/watch_instructions.asp

    or

    You can also try with this approach. This is for Armitron WR 330,but i believe this could also help you.

    The following labels are on the inner ring of the watch; I've given their positions relative to where numbers would be on the face of an analog watch.
    "ST/STP" is at 2:00; "EL" is at 4:00; "MODE" is at 8:00; and "ADJ" is at 10:00.
    To set the time, date, and day of week:
    Press and hold in the "MODE" button until the display starts flashing. (This is the alarm time.)
    Press the "MODE" button again; the seconds begin flashing. Press "ADJ" to set them to zero.
    Press the ""ST/STP" button to change what you want to set. The options appear in this order each time you press the "ST/STP" button: minutes, hour, month, day, day of week.
    Use the "ADJ" button to change the value of the setting.
    Touch "MODE" to save the settings and return to time mode.


    Thanks for using Fixya. Please rate the solution.

    Nov 06, 2010 | Armitron 165 watch

    2 Answers

    How do you set time on the Armitron Women's Sport Large Digital Pink Resin Strap Watch #456963PNK+


    Here is what I found....

    Hi, I have a 40/6753 and here is what I found to set the watch
    ................Adj......................Start/Stop

    ...............Mode
    .............................EL
    Press and Hold down the MODE button until the display starts to flash that you are Adjusting the alarm. If you need to adjust the alarm here ya go :)
    Press the mode button again and it switches from adjusting the ALARM to adjusting the TIME.
    At this point the display will be flashing the seconds. Press the ADJ button and it will switch to Adjusting the Minutes. Press the AdJ button to advance the minutes.
    Pressing the Start/Stop will switch to Adjusting the Hour. Again pressing the ADJ button will advance the Hour until you get to the correct one.
    Once correct press the Start/Stop to switch to Adjusting the DATE. Press the ADJ to advance Month and Day.
    Pressing the Start/Stop will finally switch to Adjusting the DAY OF THE WEEK. (little circle to the left hand side). Again, pressing the ADJ will advance the Day until correct.
    This took me an hour just pressing buttons until I could figure this out. I hope this helps everyone.
    Joe

    Posted by: Joe From Oregon on February 04, 2008 at 09:39 PM

    Aug 24, 2009 | Armitron Watches

    2 Answers

    How to set an Armitron WR330 Watch


    he following labels are on the inner ring of the watch; I've given their positions relative to where numbers would be on the face of an analog watch. "ST/STP" is at 2:00; "EL" is at 4:00; "MODE" is at 8:00; and "ADJ" is at 10:00.
    To set the time, date, and day of week:
    Press and hold in the "MODE" button until the display starts flashing. (This is the alarm time.)
    Press the "MODE" button again; the seconds begin flashing. Press "ADJ" to set them to zero.
    Press the ""ST/STP" button to change what you want to set. The options appear in this order each time you press the "ST/STP" button: minutes, hour, month, day, day of week.
    Use the "ADJ" button to change the value of the setting.
    Touch "MODE" to save the settings and return to time mode.
    The website listed below has many instruction sheets, but does NOT have instructions for this watch as of 25 December 2008.
    Check:
    http://www.armitron.com/WatchInstructions.html

    Mar 15, 2009 | Watches

    3 Answers

    Ladies Armitron 45/6967


    Armitron alarm/chrono
    1.To set the time hold the mode button until the alarm flashes, then hit it one more time and the time will flash to be changed. Once the alram or time is flashing use the ST/STP button to navigate between hour, minute, month, day and day of the week, the ADJ button changes the numbers.
    2.While holding down the ADJ button use the ST/STP button to turn off the hourly CHIME and the ALARM chime.
    Hope this helps!! K~~

    Sep 27, 2008 | JCPenney Armitron Sport Link Bracelet...

    3 Answers

    Armitron WR165 watch - changing time


    When you're in the regular time mode press "set". The secons should blink. Pressing "mode" brings you to the hour spot (hour should blink). Press "adj" to change the hour. To set the min., press "mode" again and the min. spot should blink press "adj" to change. Keep pressing "mode" then "adj" until all necessary time components are set correctly. Press "set" to get to regular time mode.

    Aug 15, 2008 | Watches

    2 Answers

    Can't set time on a 2 button armitron watch


    Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} Armitron says if the model is not listed on their site call them 718-784-0700. I did and they promptly e-mailed me PDF.file instructions for my M516 watch. - David

    Mar 10, 2008 | Watches

    2 Answers

    Instructions for ladies' Armitron 45/6974


    From the instructions that came with the watch:

    Press the button at the top left to get into time change mode, press on the bottom left button to move between seconds, hours, minutes, etc.

    Press the top right button to change numbers; hold to move quickly.

    Mar 10, 2008 | Bulova Watch

    Not finding what you are looking for?
    Watches Logo

    Related Topics:

    151 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Armitron Watches Experts

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18392 Answers

    Michael Vincent Cruz

    Level 3 Expert

    868 Answers

    Jimmy Accardi

    Level 2 Expert

    101 Answers

    Are you an Armitron Watch Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...