Question about Panasonic sa-ht800V Home Theater Audio System SA-HT800V System

1 Answer

My receiver for the Panasonic-SA-HT800V is toast

My receiver for the Panasonic-SA-HT800V is toast, but the other components (speakers SB-FS803, SB-PC803, SB-WA312) are fine. I cannot find a SA-HT800 system available for purchase. 

Can I purchase any other receiver that can use these speakers?

Thank you.
WB

Posted by on

  • 7 more comments 
  • johndhugins Oct 16, 2008

    It's not completely toast, but I have a lot of problems with the disc player. Is the connection to the subwoofer (and therefore to the surround speakers) standard, or is it specific to the Panasonic system? If so, can you replace the player with another Panasonic?

    My future purchase will be done differently. I don't like having to replace the whole HT system, just because the player goes out.

  • Anonymous Oct 20, 2008

    I had a power outage and when the power came back on I can no longer see the display such as what setting it is on, what the volume is at and so forth. I can only get sound to come out when it is on tuner or when playing a dvd. No sound at all from the speakers or sub when I am trying to watch my dvr which is ran to the tv with the sound system tied into the tv as well.

  • Anonymous Jan 21, 2009

    Same situation here - looking for a compatible DVD / VHS (or just DVD is okay) that I can use with the speakers I already have. Thanks!

  • Fred Day Dec 14, 2011

    I am trying to sell my folks system to down grade to plain dvd player call if interested 7653356009 $125.00

  • Fred Day Dec 14, 2011

    I am trying to sell my folks system to down grade to plain dvd player call if interested 7653356009 $125.00

  • Anonymous Mar 22, 2014

    where can I buy all the leads required for the panasonic SC-HT800V Model SB-WA330

  • Anonymous Mar 28, 2014

    cannot balance speaker volume

  • Anonymous Mar 28, 2014

    How can i balance the speaker volume

  • Anonymous Mar 28, 2014

    how do I balance speaker volume

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 51 Answers

Ebay? the speakers can only be used with this model..unless you strip the speaker wire...

Posted on Jul 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I would like to connect my computer to my panasonic sa-ht800v unit and hear the sound thru the surround sound speakers


In general, your PC's sound card (and its controlling software) will determine what it can connect to.

Even the most basic PC would have stereo analog output via the typical green 1/8" connector or a headphone jack that easily adapts to RCA pair for analog audio connection. Any Line Level input EXCEPT PHONO would accept the PC's output. The output level would be controlled by the sound card software and settings.

The SA-HT800's single LINE Input would accept the Green stereo audio or speaker output from a standard PC, once adapted. Select VCR.



Find your PC's Sound Controls and enable the applicable input. make sure the volumes of both Inputs and Outputs are turned up.

Though not applicable to theGemini, more-advanced sound cards and audio hardware would have similar adaptable 5.1 or 7.1 (paired) analog outputs and / or digital audio outputs that conform to the s/pdif or Dolby Digital standards.

Mar 26, 2011 | Panasonic sa-ht800V Home Theater Audio...

1 Answer

I hooked up the Panasonic sa-ht800V Home Theater Audio System SA-HT800V to an old tv the only hook up is the coaxial cable i turned TV to channel 3 and i get picture from the dvd is the a setting a need to...


Look at Page 12 if your TV only has RF coaxial antenna input...

http://www.retrevo.com/support/Panasonic-SA-HT800-Home-Theater-Systems-manual/id/312bh741/t/2/

Add in the Video cable (included) if the TV has an input for it and you'll be able to manage the SA-HT800 through the TV.

Make all the other necessary selections prescribed in the manual.

Jan 23, 2011 | Panasonic sa-ht800V Home Theater Audio...

1 Answer

Panasonic sa ht800v error code h07


Hi,H07 code is the error code when the spindle motor goes faulty

Aug 13, 2009 | Panasonic sa-ht800V Home Theater Audio...

2 Answers

Cannot get tv to play through speakers with cable dvr unit


Not enough info but... have you checked to see if your audio is output on the dvr and input on the reciever? also selecting the right audio on the tv menu might help... there is also a chance you might have to route the audio stright from the tv to the audio reciever instead of going from the dvr.

Jun 30, 2009 | Panasonic sa-ht800V Home Theater Audio...

2 Answers

Error61 code


thats a "protect" mode..your audio outputs are stressed and overheating..will need to be replaced soon

Aug 26, 2008 | Panasonic sa-ht800V Home Theater Audio...

2 Answers

NO DISC message


I assume that problem is dirt on laser lenses. If you don’t get any result after this, than you can replace receiver with new one. If you want to use your existing speakers with new receiver with integrated amplifier, you must pay attention on wattage, to be same like old one (i.e. 100W), and also resistance (i.e. 4 ohm). If it’s same like old receiver, you should have no problem. Good luck.

May 06, 2008 | Panasonic sa-ht800V Home Theater Audio...

1 Answer

NO DISC message


Open up the unit and clean the lens using a cotton swab and alcohol. If that does not resolve the problem, try a music CD and report the results here. I suspect that the optics have begun to fail. If that is the case, the music CD will play but a DVD will not. The optics assembly is available (part # RAF3023A-1) for about $60.
Dan

May 06, 2008 | Panasonic sa-ht800V Home Theater Audio...

2 Answers

How do I solve Panasonic SA-HT800V error code F61?


unplugged a Panasonic HDTV plasma for four minutes, plugged back in and Now the DVD does not work.

How to reset?

Aug 28, 2007 | Panasonic sa-ht800V Home Theater Audio...

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

1,075 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4850 Answers

kakima

Level 3 Expert

102366 Answers

Michael Kovalik III
Michael Kovalik III

Level 2 Expert

117 Answers

Are you a Panasonic Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...