Question about Lexmark Z600 InkJet Printer

1 Answer

Ink cartridge i dont know how to change my ink cartridge on my printer

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You have to on the printer. Then you open up the front cover, the cartridge place will move to the center of the printer.  push the lock button of the cartridge and you may remove the old cartridge. You have to remove the old cartridge and change with the new one.

Posted on May 21, 2008

6 Suggested Answers

wayneard
  • 1901 Answers

SOURCE: I cant figure out how to change the ink cartridges on my lexmark

On an X4850 the whole top of the printer opens up to reveal the cartridge carriers. Press down on the latch of each side to reveal the cartridges.

Here is a link to the User guide: X4850 User Guide It is described on page 94.

Posted on Nov 20, 2008

  • 2692 Answers

SOURCE: changing ink cartridge in printer

Download a manual and follow the directions to do so:
http://www.epson.com/cgi-bin/Store/support/SupportIndex.jsp

Posted on Jan 17, 2009

cyberguru4u
  • 90 Answers

SOURCE: changing the onk cartridge

You can find it in manual which is in support section of printer's website...

Posted on Feb 25, 2009

Grubhead
  • 4576 Answers

SOURCE: Canon MP460 ink cartridge not recognised

Perhaps the chips in the cartridges have failed? In which case you may need to replace them with brand new cartridges. If that doesn't work you might need to send it for repair as the cartridges might have damaged your machine.

Posted on Apr 12, 2009

wayneard
  • 1901 Answers

SOURCE: how to change ink cartridge in dell 922 all in one printer

Hello,

Here is a link for the user manual in PDF for your printer:

922 AIO Manual

Replacement of cartridges begins on page 44 of the manual.

Thanks for using Fixya.

Posted on Apr 22, 2009

cns assoc
  • 677 Answers

SOURCE: I changed my ink cartridge but the printer is not working

Did you use Genuine Cartridges? Brother Genuine Cartridges????

ALL…. Epson & Brother Requires Genuine Epson Cartridges. !!!!!!!!
That sounds like your problem.

In Purchasing Epson's CX 5400, CX4600, & CX7400 and more, I found out that Epson does not like Generic Printer Cartridges. I also Purchased a Brother. That also does not like Generic Print Cartridges. Color that should be Yellow, will turn out Green, Blue Brown, etc.

These printers have a CHIP that will detect if it is Generic or Genuine. When they see it’s Generic Cartridges, it will print lines thru the words, stripes across the picture and also do a mix match with the colors. It also will not let you print anything, if only one of the cartridges is empty.

I wanted to print only Black, and would not let me, because I did not have any ink in one of my cyan cartridges. Go figure.

That's what these Companies do., so they can keep selling the ink cartridges. Some Printers, are able to use Generic, and some are refillable. Some you can refill them up yourself and I heard, quite MESSY.

So I learned, thru trial and error, that you must use the ORIGINAL Genuine Cartridges for these PRINTERS. Some people say some models work fine compatible, but not mine.......


I had to replace the printer, but Epson, Lexmark & Brothers are always on sale. My Brother & Epson cost me $50.00 with Rebate. .

This is the only advice I can give you. If you find this helpful, pls rate me.

Thanks and Good Luck :0)

Posted on Feb 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I dont know how to change the ink cartridge on my lexmark?


For more detailed instructions on how to change/replace the ink cartridges in your Lexmark printer, please refer to the Lexmark X5650 User's Guide. Turn to page 111 - Maintaining Print Cartridges.
I hope this information has been helpful.

Nov 30, 2011 | Lexmark X5650 All-in-One InkJet Printer

2 Answers

HPofficejetpro L7580 doesnt recognize cartridges have been replac


hELLO THERE
there should be a section there for the maintenance of the cartridges and change cartridges make sure that you use this whenever you change out a cartridge cause if you use this when you change out the cartridge the printer will always show low on ink also you can reger to your users guide for further instructions on how to do this ok? hopethat this has been very helpfull dont forget to rate my solution
best regards mike
(USN) retired

Aug 05, 2009 | HP Deskjet 6940 InkJet Printer

1 Answer

I don't know how to get out my ink cartige


Paper goes in the bottom tray in between the guides.

There is a handle just above the paper tray to open a door for changing cartridges.

Jul 21, 2009 | HP OfficeJet 6110 All-In-One InkJet...

1 Answer

Dont know how to change colour cartridges


Turn the printer on and open the lid. After a short while, the printer carriage unit containing the print head and ink cartridges will stop right in the middle of the printer, so you can easily replace the ink cartridges. After replacing them and ensuring they're fully seated, simply close the lid. The printer will run a few quick self-diagnostic checks and run a purge cycle, and it'll be good to go.

May 16, 2009 | Canon Printers & Copiers

2 Answers

Cant change the ink


Link for manual;

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=116&modelid=15402#DownloadDetailAct

Mar 20, 2009 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

My 2175 series printer is telling me to check print cartridges. I do that and then it tells me to close the door. It then repeats the commands. Do I just need new ink - they seem fine.I'm unable to print...


u can check the printer ink in printer properties..then dont open the door if u dont change the ink cause hp printer is automatic sensor...when u open the printer door the printer cartridge goes in center automatically...so if u dont change the ink close the door always

Sep 01, 2008 | HP Printers & Copiers

1 Answer

Ink carts not recognised


OK, i know this one ;-)

1 take out the cartridge thats not recognised ( 1 or all dont matter)

2 do a ink change with no ink in

3 put ink cartridge(s) back in.... wiggle the cartridge(s) to seat the "chip" right

4 do a ink change again, if not just follow the steps again.

I had to do this 5 times the other day before it picked it up.

It does work

Jan 31, 2008 | Epson Stylus Photo R300 InkJet Printer

2 Answers

Printer does register cartridges


with ours, it looks like there is ink in there, but it is not enough to register. When we put new catridges in, it fixes the problem

Jan 01, 2008 | Brother MFC-3240C All-In-One InkJet...

Not finding what you are looking for?
Lexmark Z600 InkJet Printer Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...