Question about Acer AL2216W LCD Monitor

1 Answer

AL2216W LCD monitor "Power status Green blinking" & No display.

Hi everybody,

I have a AL2216W Acer LCD monitor connected to my HP machine with XP os through VGA D-connector. When my system was IDLE for a long time the LCD screen went blank. After some time when i touched the keyboard, my system came on running, but no display in LCD. Restarted the system, but in vein.connected the LCD to other computers which are running but the screen is blank with the power LED blinking in green colour.
Please somebody help me to sort out the issue. I was using the resolution of 1680X1050.

Regards,
Rajeeb

Posted by on

  • elcid6 Nov 23, 2008

    monitor goes blank screen after sitting will not come on even if you turn the monitor off and on it comes on for a second the goes blank again but you can see the computer on through the screen. It seems like the led is not staying on

  • djwu Jan 29, 2009

    I've a Acerr AL2216W LCD hooked up to PowerMac G4 with the same issues. The green light blinks but LCD will not show anything. I tried unplugging and replugging the power and VGA cable.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 975 Answers

LOOKS LIKE A BURN SOLDER !! , open the monitor , check the PC BOARD around the transformer area , look for burn spot or cold solder , RE solder it , try again , hope this helps please rate solution and thanks AJ

Posted on May 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an Acer Monitor AL2216W and it will come on, the Acer name appears, then no signal and then the green light goes to orange. Is this the power supply or what?


It will go into sleep mode if it does not detect the signal from the PC. Try is with other PC first, also make sure the cable is seated properly.Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.
Here is the inside of your monitor:
http://s807.photobucket.com/albums/yy352/budm/ACER/Acer%20AL2216W/

Dec 22, 2011 | Acer AL2216W LCD Monitor

1 Answer

I have acer lcd al2216w on the lcd there is a green line comes between my screen it cant be remove i dont not how he comes please tel me what i do change a new lcd or what it can repairable or not


Hi there reinstall the display driver & then give a look. If you face same problem then its may problem with your display driver or in the monitor.

Jan 18, 2011 | Acer AL2216W LCD Monitor

3 Answers

My Acer AL2216W Black LCD Monitor all of a sudden is wavy & flickering!?!?!? Is there anything I can do about it?


Hello,i think your LCD monitor is faulty and you should consider replacement.but first take to a qualified service personnel.

Dec 22, 2010 | Acer AL2216W LCD Monitor

2 Answers

Acer al2216w problem


wronge connection check it

May 01, 2010 | Acer AL2216W LCD Monitor

1 Answer

AcerAL1714 LCD Not Connecting With DELL Inspiron 15 Vista Laptop


There is a symbol of Two monitors on F3 Or F4 button

1. Press Fn key and hold it
2. by holding Fn key press F3 key

Your monitor will start displaying

Oct 05, 2009 | Acer AL1714 17" LCD Monitor

2 Answers

Same problem, acer sucks imo


I think I may have fixed it but I haven't rebooted my computer yet. I uninstalled the latest ATI driver version 9.3 and then installed an older driver version 7.3. Monitor now turns on and off and gets signal every time so far. I'll post back if it the problem comes back after I reboot.

Apr 08, 2009 | Acer AL1916W 19" LCD Monitor

1 Answer

Native resolution suddenly scrolls.


The native resolution for the Acer AL2216W is 1600X1200. It is acting correctly for the resolution you have set it to.

Apr 05, 2009 | Acer AL2216W LCD Monitor

1 Answer

1 line going across my acer al2216w 22" widescreen lcd monitor


Is the line still there if you unplug the monitor from the PC and bring up the onscreen display or menu? If so the LCD panel is likely bad, and would be replaced if under warranty. If the line is not there you can try to replace the VGA or DVI cable that connects the LCD to the PC. You can also connect the LCD to another PC and see if the lines are still there to make sure it is not the graphics card on the PC.

Mar 18, 2009 | Acer AL2216WBD LCD Monitor

1 Answer

Blurred "No Signal" in the TFT when only power cable is connected.


in display settings try to reset the screen resolution

Oct 16, 2008 | Acer AL2216W LCD Monitor

Not finding what you are looking for?
Acer AL2216W LCD Monitor Logo

642 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computer Monitors Experts

 Elex
Elex

Level 2 Expert

49 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

John Trigg

Level 2 Expert

250 Answers

Are you an Acer Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...