- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.
Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.
The best way to transfer pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.
Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo management program such as Picasa. Organize edit and share your photos
- The basic requirement is interface cable. There is no additional s/w required to transfer videos. - Just connect your video camera with laptop using cable. It will automatically recognize your camera and installs drivers if required. - It will open screen containing all your video/image files stored in your camera.
I've discovered for you on the Panasonic web site the compatibility driver for the USB connexion between your camera and the PC. It is HERE. All you have to do is to download the driver to your computer and to install it. If you will SCROLL DOWN on the same page you will have all indications concerning of how you are supposed to get the driver to run properly.
You need to use a firewire cable to transfer the video stream from camera to the PC. This is because the gs34 (supposedly) does not support full speed USB 2.0. You need to have a firewire port on your computer. If you do not have one, you can purchase a firewire card.
Please refer this page for more information about this problem.
This thread gives some information about purchasing the cable and the card.
you connect via a usb cable or bluetooth which is a wireless connection. if you have tried connecting with a usb cable, what happens? If the device cannot be seen or recognized by your pc the most common reason is that you dont see a device you plugged in is that you dont have the proper drivers installed on your pc. See what error meesages you get, and troubleshoot! Are you saying your internet connection on your PC is via vodafone usb dongle? This should not affect your ability to connect a mobile phone via a usb cable which should work without being connected to the internet. Its all a question of hsving the correct drivers, but some software wont work with the dongle software, which has to be uninstalled. Troubleshoot for the correct drivers them get technical help from micromax
go to this link to download the softwaqre for your computer to recognise the VDR-D250.
This driver allows the computer to recognize the camera. It does not allow the transfer of data. Data Transfer is only possible if optional DVD Movie Album software is installed. This optional software is available through parts distributors, part number LSFT0643-1A. Please refer to our Customer support page for Parts distributor locations. To install driver - Please save the Zipped file to your desktop, Unzip, then connect your camcorder to your PC with the included USB cable and set the camcorder to playback mode. Then install the driver. You will get a setup error when trying to install the driver if the camcorder is not connected to the PC prior to installing the file.
I am not sure which camera you are reffering but when you need to import still pictures you set the mode on the camera right(it should be instructed on the camera panel itself) and connet it via a working USB connecting cable and then the computer would treat you camera and the memory card as a mass storage device. Or if the images are in a memory card, plug it out and connect it through a card reader. You do not need a software for that. HAH it is different in case of a Video file. You would need a Studio Software like Power Director, Pinnicle Studio and so on.
If you are using USB connection, you don't have to install a driver. It should be plug and play and the driver should be installed for you automatically. If you do see a find new hardware message which ask you to install driver, you can follow the instructions to install the standard USB driver from Windows (use the recommended options or the search in windows option). If it is not showing up after the installation, open device manager of control panel and and found the device, then right click on it and choose update driver, then browse to the driver file windows\system32\drivers\usbstor.sys and install it.
If you like to use some Panasonic software or driver to play around the content of the dv, check the following links for downloads. http://panasonic.jp/support/global/cs/soft/download/index.html http://panasonic.jp/support/global/cs/e_cam/index.html
Fist of all I like to inform in computer S-Video output of the camera usually does not fit to computer. Only if the computer has S-Video Input card it will be possible. However logic is simple. Digital Camera or Camcorders uses 1394 or USB connection to connect to the computer. You havent indicate what model of JVC you use, almost all JVC Digital Cameras come with USB connection option. All you need to put USB cable in between. If it asks driver, use the CD comes with the Camera or download from JVC's support website. http://support.jvc.com/