Question about Cameras

1 Answer

My sony Cyber-shot present a mesage "Access" in the screen. What a need to do ? Thanks Victor Gonzalez

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello Victor

The problem is that the lens has become stuck in the barrel after dropping it. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

Hope the advise is useful.

Regards
Andrea

Posted on Aug 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

When I turn on sony cyber-shot camera I get a screen display that states "access". The lens keeps going in and out and then it states,"turn the power off and on again" What's...


When I turn on sony cyber-shot camera I get a Problem with the Sony Cyber-shot DSC-W35 Digital Camera when I turn on sony cyber-shot camera I get a screen display that states "access". The lens keeps going in and out and then it states,"turn the power off and on again" What's wrong??

Oct 12, 2011 | Sony Cyber-shot DSC-W35 Digital Camera

1 Answer

I turn my Sony Cyber Shot camera and I get ACCESS


I'll forward a link to a page where you can view the information to troubleshoot this issue.

Please click on the link to view the troubleshooting steps and follow all the steps and check if that helps.

http://www.kb.sony.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=C267279&sliceId=1&docTypeID=DT_KNOWLEDGEARTICLES_1_1&dialogID=91362627&stateId=1%200%2091366820

Thank You!

Mar 30, 2010 | Sony Cyber-Shot DSC-T1 Digital Camera

3 Answers

When I turn on my Sony Cyber-shot DSC-W35 the screen is dark with the word "Access" on it, moments later it tells me to power it off adn on again, any ideas?


Its lens error in your DSC-W35 camera.
Lens mechanism is either stuck or not retract completely and system control sense this error. Please replace lens assembly to get it fixed because lens mechanism is not repairable.
Thanks.

Dec 20, 2009 | Sony Cyber-shot DSC-W35 Digital Camera

2 Answers

Every time I try to turn the camera on it beeps and the screen says access... then says turn the power off then on again. Why?


Hi,
This problem is related to optical zoom motor,The part detail is given below:
Part No. Description
A-1231-924-A LSV-1160A

Replace the said part number and your camera work fine again.
Thanks for using fixya.

Jul 29, 2009 | Sony Cyber-shot DSC-W80 Digital Camera

1 Answer

Reseting Sony H1 digital camera


Hi

If you examine the body of the camera there is a tiny reset - which is recessed into the body. To access it you need somthing such as a bent out paper clip wire.

Hope this helps. Remember to rate my answer. Thanks.

Jul 16, 2009 | Sony Cyber-Shot DSC-H1 Digital Camera

1 Answer

SONY CYBER SHOT NOT WORKING


Hello samtx930, "turn off the power and on again" its a very commen problem and occurs when the lens block assembly start malfunctioning. Actually the slide motor not work properly and until the lens not come out completely the camera will not work, that's why the error message appears "Access" and then screen shows "turn off the power and on again". In this situation you have to replace lens block assembly.And the part No. is with description is given below: 1-788-363-11 OPTICS UNIT (ED13A) Thanks for using fixya.

Jun 14, 2009 | Sony Cyber-shot DSC-W55 Digital Camera

1 Answer

When I turn on my sony cyber shot it says turn power off & on


Hi,
    In your camera two problems are present 
1- BD board (main board) have to be replaced
2-Lens Block Assy. Also needs to be replaced.

You can contact any sony service centre nearby to you. For your convenience please visit:
www.sony.net
or
www.sonyworld.com
Here you can find contact info of nearest service centres.
Thanks for using FIXYA. 

Jan 20, 2009 | Sony Cyber-shot DSC-W55 Digital Camera

2 Answers

Sony Cyber-Shot DSC-W30. The lens is in a "stuck" position


You have a bad lens, it prob. also says turn off and on again.

Jun 30, 2008 | Sony Cyber-Shot DSC-S90 Digital Camera

2 Answers

Lens will not retract and no view on back of screen


possible bad lens assembly.These can only be replaced try alamo camera service .com

Jun 03, 2008 | Sony Cyber-Shot DSC-S90 Digital Camera

1 Answer

E 6120 PROBLEM


I wouldn't worry about thst 61:20 problem ( a lens problem I think) unless it is affecting your picture taking, I have the same thing on my Sony Cyber-Shot DSC-S40 camera and I find my little camera still takes beautiful photos with no problems, although when I turn my camera on itmakes some noise and access comes on the screen.

Nov 17, 2006 | Sony Cyber-Shot DSC-S40 Digital Camera

Not finding what you are looking for?
Cameras Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cameras Experts

kakima

Level 3 Expert

102366 Answers

Steve

Level 3 Expert

3287 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Are you a Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...