Question about HP PSC 2410 All-In-One InkJet Printer

1 Answer

Hp psc 2310

How can i solve my problem in my printer? It says that "Alignment Failed.. please try again.."? please help me...

Posted by on

  • Anonymous Aug 06, 2008

    Similar problem. My problem started after I replaced the out-of-ink black cartridge with a new one. It always display the message 'Press OK to printing align Cartridges page'. After pressing OK a page gets printed and the message 'Alignment Failed .. please try again" is displayed. I tried many times and the same message appears each time i tried. I too need help to fix this problem.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Expert
  • 79 Answers

Hi,
unplug the power cable
Press and hold # and 6 on the printer while keeping these tow buttons on hold plug the power cable back in . when the screen goes off release the buttons and press the power button to turn the printer on. it ll perform a semiful reset on the printer .
if the issue still persists then unplug the power cable again
Press and hold OK and CANCEL on the printer while keeping these two buttons on hold plug the power cable back in . when the screen goes off release the buttons and press the power button to turn the printer on . follow the screen ...
it shud be resolved ..
:-)

Posted on May 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My HP 950xi is stuck on "Press enter to align cartridges." How do I delete or bypass this message on my printer?


Have you already solved your problem? There are at least three posts about the same problem and the PSC 950.
If you solved your problem, please comment, saying how you did it, so that you can help others.
If you didn´t solve it, check this HP FAQ:
Solving Print Cartridge Alignment Problems
Note that it says (in the end) that you can bypass the alignment page and use the information from the last successful alignment in your printer, by pressing and holding the Enter button, and then pressing Setup .
I offered this same suggestion to other posters: one replied it didn't solve his/her problem; the other, let know it did.
It might work for you. Please try and give some feedback (even if it is not positive).

Aug 05, 2009 | HP PSC 950 All-In-One InkJet Printer

1 Answer

I cannot get my cartridges to align. I keep getting a error message. It print black, but not in color


Have you already solved your problem? There are at least three posts about the same problem and about the PSC 950.
If you solved your problem, please comment, saying how you did it, so you can help others.

If you didn´t solve it, check this HP FAQ:
Solving Print Cartridge Alignment Problems

Note that it says (in the end) that you can bypass the alignment page and use the information from the last successful alignment in your printer, by pressing and hold the Enter button, and then press Setup .

I offered this same suggestion to another poster, who replied it didnn't solve his/her problem. It might work for you though. Please try and give some feedback (even if it is not positive).



Jul 18, 2009 | HP PSC 950 All-In-One InkJet Printer

2 Answers

My printer is HP PSC 2310. While installing my


Before uninstalling or downloading a bunch of unnecessary files, try looking for the file in your computer by using the search engine in windows (press start -> search -> type hpfmom10.hlp -> press enter). Then once the file is found, copy it's address to the field where the installation think the file is located. Way easier and less time-consuming than other solutions.

Jul 16, 2009 | Printers & Copiers

3 Answers

Printer prints a test page every time it is turned on.


Hi everyone

After replacing the print cartridges 2 steps need to be done:

1. Wait for the test page to be printed out and

2. Put a page over the scanner glass and press scan button on your

printer.

Turn off the printer and turn it on again to see if the problem was

solved.

Ali Khan

Dec 19, 2008 | HP PSC 1350 All-In-One Thermal Printer

1 Answer

It automatically print a page everytime I start my hp psc 1315


Hi Siddarth

In HP PSC 1315 printer after replacing new Ink Cartridges the printer always prints Alignment test page every time you turn it ON.To resolve this problem you must complete the alignment process.

Steps

1.Turn the printer ON.
2.Once its ON, it will print the Alignment page. Place the page in the scanner bed correctly.
3.Then Press START SCAN button.
4.The power light will start blinking, wait until the power lights turns solid.
5.Now Alignment process is over.Discard the paper from scanner.
6.Turn the printer OFF and then ON, it will not print that page again.

Note:Please follow this steps every time when you replace the Cartridges.

Thanks
Rizwan
rizwan84tx@gmail.com

Dec 08, 2008 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

HP PSC 1510 PRINTER


first ckeck out the your cartages are ok and then when you start the printer them it print the alignment page then put it in the scanner and scan it your problem will be surually solved

Jul 26, 2008 | HP PSC 1510 All-In-One InkJet Printer

Not finding what you are looking for?
HP PSC 2410 All-In-One InkJet Printer Logo

Related Topics:

974 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96467 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...