Question about Polaroid FLM-3232 Television

1 Answer

I have a Polaroid FLM323B and was watching it and it just went out. No power light, no nothing, what could have fried?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,889 Answers

Sounds like a power surge related problem. My money would be on the Power supply board itself. In cases like these it might be a good idea to replace the entire board itself (costs about 100$) instead of going component by component coz off late the protection circuitry have been getting weaker and as a result a lot of components are getting fried by surges. Last week I have worked on a set with similar problem that had the following fried components blown 10A fuse, 2 Voltage , 2 10KOhm resistors , Regulator ICs, 2 Circuit protectors along with a few capacitors of varying values of capacitance!

Posted on Aug 26, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Polariod Product FLM323B HDLCD Model3200--Have sound but now no picture what do i need to do to fix


Check its back light. Replace the back-light inverter; if found faulty. If you wish to get some details, check the site linked here. Pull up older posts. Check the site in 'Mosaic' view. It will make search easy. http://electronicshelponline.blogspot.com/

Jan 18, 2014 | Polaroid FLM-3232 Television

2 Answers

Polaroid FLM323B,power board What is the voltage at these pins?


Check the caps on the power supply board, this is the most common problem with this model. Here is a link to a repair guide for a TV that uses the same power supply board

http://www.ccl-la.com/blog/index.php/visco-vsc-37v1-no-picture-lets-repair-it/

I hope this helps, if so please rate my solution

BuddyMc

Jan 24, 2012 | Polaroid FLM-323B Television

1 Answer

Where is the diode z 9


If your board is like this Polaroid FLM323B 3200 this is your answer..
1_23_2012_3_05_52_am.jpg

Dec 04, 2011 | Polaroid FLM-323B Television

1 Answer

Need polardiod flm323b flat screen power supply diagrams


Not available, try getting a p/s on-line. if not have a tv shop repair yours.

Oct 30, 2010 | Polaroid FLM-323B Television

1 Answer

My flm323b polaroid tv has sound but no picture


It's bad power board or bad inverter.

Here is a link on how to test the power board:
http://blog.coppelltvrepair.com/2010/09/how-to-test-power-supply-r0804-0901.html

Hope this helps. If it does please rate it - we need your support too!

If you have any questions do not hesitate to contact us.

bobby @ www.coppelltvrepair.com

Oct 19, 2010 | Polaroid FLM-323B Television

1 Answer

I have a polaroid 3200 TV while I was watching tv it made a loud noise as if an engine were reving up and then went black when you turn on the tv the blue led illuminates but nothing else. Any Ideas....


msp_pitt, The first place I would investigate would be the units MAIN "switch-mode-power-supply" to see if any capacitors have blown-up or vented themselves to room atmosphere. I would also check the units "inverter supply" board for bad capacitors or other fried components. You may or may not find parts or boards for this unit. could try some place called "shop jimmy" I think. Before you do anything visit YOUTUBE. You might find information there also, or a DIY video of common fixes for SMPS's on your unit. Good luck. 12fixlouie

Jan 30, 2010 | Polaroid FLM-323B Television

1 Answer

Flm323b power supply


Replace Q2 by 18N50, Q8 and Q9 by STP6NK60 and Z2 and Z4 by !n4739. I have the same problem and fix it.

May 22, 2009 | Polaroid FLM-323B Television

1 Answer

Blue light special Polaroid flm323b


Yep. Symptoms could be anything from high-pitched hum to no picture at all. On these defective models, I would start at the caps and work back. It won't hurt to replace them anyway.

http://www.fixya.com/support/r741402-polaroid_flm_373b_lcd_tv_black_screen

Nov 08, 2008 | Polaroid FLM-323B Television

1 Answer

I have a 32" tv, LCD HD tv Model number FLM323B w/built in HD tuner. It made a poping sound and went completely out. and then came back on for about 15min. and popped again and went completely out the...


Polaroid says the part is the control box,,Cost to fix is around 700.00. Yuck Yuck. Polaroid offered a refurbished tv in place of the one that doesn't work. they offered a 90 day warranty. The costs of shipping my old one back to them was at my expense.....
We are going to buy a new TV... Problem solved,,,Won't buy another Polaroid...

Aug 27, 2008 | Televison & Video

Not finding what you are looking for?
Polaroid FLM-3232 Television Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...