Question about Sony Mavica MVC-CD400 Digital Camera

1 Answer

Sony cd400 lens cap attached error - Sony Mavica MVC-CD400 Digital Camera

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance.

Regards
Andrea

Posted on Sep 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Error message states "lens cap attached" when that


Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea

Dec 07, 2010 | Sony Mavica MVC-CD400 Digital Camera

1 Answer

Lens cover attached error on my sony cd400 digital camera


Hello

The problem is that the lens has become stuck in the barrel after dropping it. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

Hope the advise is useful.

Regards
Andrea

Aug 28, 2010 | Sony Mavica MVC-CD400 Digital Camera

1 Answer

Sigma 70-300 +''no lense attached'' w/ sony a200 dslr


clean brass contacts with qtip and rubbing alcohol. let air dry couple of hours. do the body and the lens. hope that helps

Jun 02, 2009 | Sony Alpha DSLR-A200K Digital Camera

1 Answer

Mavica cd-400


Hi,
   The lens of camers get malfunctioning,Therefore you have to replace complete lens assymbaly.For this contact nearest SONY SERVICE CENTRE.

Thanks for using fixya.

Nov 26, 2008 | Sony Mavica MVC-CD400 Digital Camera

1 Answer

Mavica CD400 zoom not working


Hi,
   The lens assambly get malfunctioning.Therefore, YOu have to replace complete lens assy.For this plz contact nearest available SONY SERVICE CENTRE.

Thank you for using fixya.

Nov 25, 2008 | Sony Mavica MVC-CD400 Digital Camera

1 Answer

Battery error message at start up


put new battery in, theres a watch battery also that in camera

Dec 10, 2007 | Sony Mavica MVC-CD400 Digital Camera

1 Answer

Lens cap error


This is a CCD error it sees nothing so 'thinks' the cap is on- Nothing for but to get on to Sony support

Sep 10, 2007 | Sony Mavica MVC-CD500 Digital Camera

1 Answer

Mavica CD400 won't take photo


problem with the lens, try taking it out and putting it back in

Jul 30, 2006 | Sony Mavica MVC-CD400 Digital Camera

1 Answer

Disk error


Hello anuhera, This is a very common problem with the cd400 camera, I have learned the hard way that Sony's recommendation to use their [expensive] media was more than just self interest. There are a lot of quality issues with CD media. As my camera has aged it is more and more intolerant of off-brand media. This is true even though I have not shot more than a 1000 images with the camera. While I can plan on getting the c:13:01 error with unbranded disks, I can still use the Sony disks without much if any problem. To get your pictures back, go to www.cdroller.com and download their recovery software, worked great for me. Let me know if you need any additional info. Best regards, nightdiver

May 30, 2006 | Sony Mavica MVC-CD400 Digital Camera

Not finding what you are looking for?
Sony Mavica MVC-CD400 Digital Camera Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Cameras Experts

kakima

Level 3 Expert

102366 Answers

james laughton
james laughton

Level 3 Expert

2023 Answers

JonSnell Electronic
JonSnell Electronic

Level 3 Expert

20195 Answers

Are you a Sony Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...