Question about Lexmark X2670 All-In-One Printer

2 Answers

I need a manual, their was no manual with the box. i need help! the printer was printing 3-4 cys of everything and i couldn't get it to stop...so i unpluged the big horizontal {3 " x 1/12} plug now it won't print...i need a hard copy of the manual... what if something else happens? i left a msg on the lexmark ? Official site and can't find it anymore!!! i am new to the internet, etc. re: i am also new to windows. My name and address are: Becky Ann Haden, 4079 meadowleigh way, gahanna, OH 43230. you can still answer my problem anyway...please help me get my printer going again...i am begging you...thank you very much...bye, becky my e-mail is becky4079@att.net that's it...

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lexmark Master
  • 17,129 Answers

Hi Becky, please do not worry as we are in an age of electronics and sometimes they act so funny specially at times you need them.
I will try to help you out. I hope you have the software Cd that came along.
1.Now remove the plug of the printer from the computer .
2. Open control panel and open install/remove program icon.
3. In the window you will find all the programs in your system. now click on the printer software... Lexmark.. and uninstall( ONLY IF YOU HAVE THE SOFTWARE WITH YOU).
4. Now use the Cd to load and install the lexmark printer software.
5.Now you must plug back your printer to be detected as the new hardware.
6. Try to take a test print, it this wont work I think there is an error on the printer harware then you might need a new board.
But please do not panic but take your time to do this and I hope it will reset back.
Credit me if this advice works .

Posted on Aug 26, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 54 Answers

I have the manual plz give me your email id or sent me a link on my email id samathelostking@gmail.com

Posted on Aug 26, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to print on envelopes


I reviewed the manual and looked at a close up picture and conclude that it appears this machine is not built to print out on envelopes.

I suggest calling Canon at 1-800-828-4040.

Sorry I couldn't help more.

Oct 16, 2012 | Canon imageCLASS MF5750 All-In-One Laser...

1 Answer

When I go to print everything looks good. The paper feeds through the printer but nothing prints on it.


Hi,

Welcome to FixYa.

This problem might be due to blockages in the print head nozzles or if a FINE Cartridge is empty.

Kindly try the print head cleaning function to remove any blockages in the print head nozzles.

The procedure for cleaning the print heads, in the printer driver setup window (The printer driver setup window can be displayed through the application software in use or the Start menu of the Windows), is as follows:

Cleaning:

1. Make sure that the printer is on and click Cleaning on the Maintenance tab.

Print head cleaning starts.

2. Click OK when the confirmation message appears.

3. Next, the Nozzle Check dialog box opens.

To check whether the print quality has improved, click Print Check Pattern. To cancel the check process, click Cancel.

If cleaning the head once does not resolve the problem, clean it once more.

Deep Cleaning:

Deep Cleaning is more thorough than Cleaning. Perform deep cleaning when two cleaning attempts do not resolve the print head problem.

1. On the Maintenance tab, click Deep Cleaning.

The Deep Cleaning dialog box opens. Follow the instruction shown in the dialog box.
Click Initial Check Items to display the items you need to check before performing Deep Cleaning.

2. Make sure that the printer is on and then click Execute.

Click OK when the confirmation message appears.
Print head deep cleaning starts.

If there is still no sign of improvement, the ink may have run out and the cartridges need to be replaced.

For more details, please download and install the complete on-screen manual from this link.

Thanks for using FixYa.

Dec 15, 2011 | Canon PIXMA MX310 All-In-One Printer

1 Answer

Couldn;t print a operators manual for the Thermos grill 2 go


Not usre why you couldn't print the manual (printer problems?) but short of providing an link to the Owner's Manual and the Assembly Manual., the only thing left to do is provide you with the telephone number for Char-Broil (they are the manufacturer) Customer Support: 1-866-239-6777

Owner's Manual
http://www.charbroil.com/bps/char-broil/char-broil/knowledge/grill2go-va%20manual%20-%20english%20-%20040303.pdf

Assembly Manual
http://www.charbroil.com/bps/char-broil/char-broil/knowledge/4656110-6213-e.pdf


I hope this helps you. Please let me know. Thanks.

Jun 19, 2011 | Thermos Grill2Go Gas Grill 4656110

2 Answers

Cant get printer to print


I know this is going to sound odd, but did you install a new cartridge? My son worked on his for a while after putting in a new cartridge and couldn't get it to print. His friend, who is very good with computers and all helped, and to no avail they couldn't get it to work.
The printer at that time was very new, so we didn't think that could the problem...they were missing something. As it was, they were so intent on installing and setting it all up, they put the cartridges in without removing the tape that is placed over the end of the cartridge after being manufactured. Once they realized and removed both tapes, everything worked out fine.
It could be something that simple...if you were in a hurry. And, yes, I know it sounds impossible, but I KNOW THAT THIS ACTUALLY HAPPENED so it could happen again. Good luck.

Apr 08, 2011 | Lexmark X2500 All-In-One Printer

2 Answers

PRINTER COLOR PROBLEMS


o.k. I can give you a few tips that may be of assistance.

you need to run a printer alignment page like you do when you put in new cartridges.

unplug your printer plug it back in.
open door and take out print ink cartridges.
put them back in and then close the door.

It should now prompt you to do a test alignment page.

Also, Another thing to try is to hit file, top left of page, hit print, click properties. color tab.

make sure you are printing high quality on chose different color management options.

FINALLY TRY THIS:

When Printing Becomes Faint or Colors are Incorrect

When printing becomes faint or colors are incorrect, even if ink remains in
the ink tanks, the print head nozzles are probably clogged. Follow the
procedures below to maintain the print head.
Important Before maintaining the print head, check the following;
􀁺 Open the front cover and make sure that the ink tank
contains ink. If it is out of ink, replace it.
􀁺 Ensure that all the orange tape of the ink tank has been
peeled off.
􀁺 Press "PUSH" on the ink tank and ensure that the ink tank
is installed securely.
􀁺 Increase the Print Quality setting in the printer driver
-----------------------------------------------------------------------------------
Printing the Nozzle Check Pattern
Print the nozzle check pattern to determine whether the ink ejects properly from the print
head nozzles, and to verify print head alignment. Use this function when printed results are
blurred or the color is incorrect.
1 With the printer on, load a sheet of Letter-sized paper in the printer.
2 Open the Printer Properties dialog box.
See "Opening the Printer Properties Dialog Box Directly from the Start Menu" on
page 25.
3 Print the Nozzle Check Pattern.
(3) When the confirmation message is displayed, click OK.
When the confirmation message is displayed after the nozzle check pattern has
been printed, click OK.
See "Examining the Nozzle Check Pattern" on page 52.
Note Nozzle check pattern printing can be executed also from the printer
itself. With the printer on, load a sheet of Letter-sized paper in the
printer. Hold the RESUME/CANCEL button until the POWER lamp flashes
--------------------------------------------------------------------------------------
Print Head Cleaning
Clean the print head if you suspect that the nozzles might be clogged. Cleaning the print
head consumes ink, so perform print head cleaning only when necessary.
The print head can be cleaned also from the printer itself. With the printer on, load a sheet
of Letter-sized paper in the printer. Hold the RESUME/CANCEL button until the POWER lamp
flashes once.
1 Ensure that the printer is on.
2 Open the Printer Properties dialog box.
See "Opening the Printer Properties Dialog Box Directly from the Start Menu" on
page 25.
3 Start Print Head Cleaning.
(1) Click the Maintenance tab.
(2) Click Cleaning.
(3) Select the print head to be
cleaned.
(4) Click Execute.
-------------------------------------------------------------------------------------------
Print Head Deep Cleaning
If print quality does not improve by standard print head cleaning, try performing print head
deep cleaning, which is a more powerful process. Print head deep cleaning consumes ink,
so perform this procedure only when necessary.
1 Ensure that the printer is on.
2 Open the Printer Properties dialog box.
See "Opening the Printer Properties Dialog Box Directly from the Start Menu" on
page 25.
3 Start Print Head Deep Cleaning.
(1) Click the Maintenance tab.
(2) Click Deep Cleaning.
(3) Select the print head to be
deeply cleaned.
(4) Click Execute
-------------------------------------------------------------------------------------------
Aligning the Print Head
This operation must be carried out when using the printer for the first time. Aligning the
print head positions allows you to print without shifts in the color registration.
Print head alignment is performed either automatically or manually. This section deals with
automatic print head alignment only.
1 With the printer on, load a sheet of Letter-sized paper in the printer.
2 Open the Printer Properties dialog box.
See "Opening the Printer Properties Dialog Box Directly from the Start Menu" on
page 25.
3 Print the pattern.
(1) Click the Maintenance tab.
(2) Click Print Head Alignment.
(3) Check that paper is loaded in the
printer and click OK. If a message
warning you not to perform other
operations appears, click OK.
It takes about one minute to start
___________________________________________________

this covers everything you should solve the problem with my advice.

please give me a good rating for my time and effort! Thank You


Mar 28, 2010 | Canon i860 InkJet Photo Printer

1 Answer

Everytime I hit print I get a box saying Epson Status Monitor 3 Could not find specified file.


Go to the start menu and look at your programs under Epson and uninstall the status monitor 3 you don't need it to print. If it's not there try to find it in the uninstall programs under the control panel. If you get rid of it your printer should still print fine you just won't get all the messages from it. You can still do everything you need from the front panel. Just download the user manual from Epson.com You can still download the status monitor 3 from Epson if you really need it, but it may not work because of the previous installation.

Aug 25, 2009 | Epson Stylus 880 InkJet Color Printer

2 Answers

Will not print


When the ink absorber is full it cannot clean. Ink box needs to be replaced by a repair shop, and the count reset.

Jul 26, 2009 | Brother MFC-3240C All-In-One InkJet...

1 Answer

Canon mp530 issues with printing


Use scaled printing (Mac OS X) Instructions to use scaled printing. You can manually select the scaling ratio you wish to use to print images and documents. scaling_sample.jpg Note: The Scaled Printing function is not available when Borderless Printing is selected (OS X.version 10.2.1 or higher).
  1. Open the Page Setup dialog box.

    mac_osx_select_page_setup.jpg

  2. Specify the Scaled Printing settings.

    mac_osx_page_setup_options_ip8500.jpg

    Note: For a reduced scale printing, enter a value smaller than 100 %. For an enlarged scale printing, enter a value greater than 100 %.

  3. Click 'OK'.

    mac_osx_page_setup_click_ok.jpg

  4. Open the Print dialog box.

    macx_file_print.jpg

  5. Click 'Print'.

    mac_osx_click_print.jpg
Printing will now begin.

I hope it helps!!!

Nov 27, 2008 | Canon PIXMA MP530 All-In-One InkJet...

1 Answer

Installation


i had this problem too - i did notice that the printer shows up in the printer control panel so i tried doing a test page - a dialog box appeared recommending cleaning - see quick start guide manual and do maintenace / cleaning - then manual said do nozzle check pattern - after this i went back to dialog box and clicked ok - and finally finally the test page printed

Aug 06, 2008 | Canon PIXMA MP470 All-in-One Printer

2 Answers

Xerox 8560MFP won't print first page from one tray and rest from another


Microsoft word overides the print driver for page choice. Choose from within word File | Page Setup | Paper.
Tray one on this printer is the manual feed tray. tray 2 is the first drawer.
Ensure the printer driver is set up for the additional trays

Jul 02, 2008 | Xerox Phaser 8560MFP Laser Printer

Not finding what you are looking for?
Lexmark X2670 All-In-One Printer Logo

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18390 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...