Question about Bosch Washing Machines
E-mail me to get all the steps
Posted on Aug 26, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
To change the seal the easiest way is to take the front of the appliance off. Remove the kick plate at bottom and you will see some screws holding the front panel on remove these Then open door and remove the screws holding the door lock on and unlip the seal by releasing the clamp on the front. The front should now lift off, if it doesnt then pull out the soap drawer and behind that at the bottom of the drawer is a screw holding the front on remove this then push the front panel down then it will lift off You can now take the clamp holding the seal to the tub off. Fit the new seal, fit the clamp to the seal and tub. From here, rebuilding is the reverse of the strip down.
Posted on Feb 18, 2010
Tips for a great answer:
Mar 19, 2018 | Bosch Washing Machines
Nov 05, 2014 | Washing Machines
Feb 14, 2011 | Bosch Washing Machines
Feb 18, 2010 | Bosch Classixx WFO 2466 Front Load Washer
Jan 11, 2010 | Bosch Washing Machines
Dec 28, 2009 | Bosch Classixx WFL 2066 Front Load Washer
Dec 07, 2009 | Bosch Washing Machines
May 16, 2008 | Washing Machines
354 people viewed this question
Usually answered in minutes!