Question about Arris DCT6200 DTV Receiver

3 Answers

I just bought a MAGNAVOX DTV TB100MW9. Before hook-up,we fot channels 4,6,10,20. After hook-up, all I am getting is 4 PBS channels. Why

Posted by on

  • fblas2 Aug 03, 2008

    I too bought Magnavox dtv receivers and can only get channel 4.1 for the normally local broadcast channels. Channels 4, 5, 7, and 9 are the normal channel plus some pbs channels. What I can get are a group of foreign channel broadcasts, which I do not want. I have a rabbit ear antenna on only one tv since all of the rest of my sets are satellite. I have tried orienting the antenna every way possible. I don't want to go out and buy a new antenna if the problem is with the dtv receiver. Any comments will be helpful.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Need help on what to do on connecting my converter box up. Don't know how to connect it up. Also can't get to tv to stay on ch 3. help

Posted on Jan 08, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a sony dvd player for dvd disk and regular hs cassetes connected to a 6 year old GE TV.after I connected my Magnavox converter I get quite a few channels, not as many as before. I;m on a high hill several miles from Pittsburgh. I have a large rotatable anttena in my attic and several TV;s around the house with rabbit ears my TV reception is excellent on all TV antennas I receive now with the coverter channels 2.1, 4.1, 4.2, 8.1, 8.2, 11.1, 11.2, 13.1, 13.2, 13.3, 22.1, 22.2, 53. 1,2,3. all with antennas. The problem I have is recording on my Sony recorder, what could be my problem. I can no longer record CH 4. I have my TV, recorder, and coverter on CH 3. I have tried different settings as to TV antenna or tv antenna/cable, nothing works

Posted on Jun 10, 2008

Picture and sound goes off after a few minutes

Posted on May 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Magnavox TB100MW9 DTV Converter repair


After a close-by lightning strike, my Magnavox TB100MW9
Digital TV Converter box stopped working. I took it apart and found a
shorted diode (the fat one on the power side of the board)
marked with the number SB340. From the NTE cross-reference
web site, I found a replacement diode, NTE586 (Si, Fast
Switching, Schottky Barrier Diode) that cost me $2.40 at
a local electronic parts store. I replaced the diode and
it works fine!

on Apr 27, 2015 | Magnavox TB100MW9

1 Answer

Magnavox TB100MW9 DTV Converter repair


It is likely the converter will have to be replaced

Jun 18, 2013 | Televison & Video

1 Answer

Tb100mw9 dtv converter I cannot access setup wizard.


Unplug,replug the converter box back like about an hour later.The box will resetting itself back to the factory setting,should able to bring up setup wizard than.

Jun 06, 2011 | Magnavox TB100MW9

1 Answer

Magnavox DTV converter shows no signal


do you have your converter box hooked up to an antenea? If so, if you move the antenea, then you may have to reprogram the channels through the converter box. This happened to us. So, we played around with the antenea until we found the most channels came through and marked the area around the antenea (you can use tape, or if you do not care a permanet marker like us. Note our antenea sits on top of our tv.) We have not had any trouble since. We marked the place for the antenea, in case someone moves it or so we can try to get more channels when the final switch happens. We gain a lot of stations, but lost only one.

Hope this helps,
The Gordons :)

Jan 06, 2009 | Insignia Digital-to-Analog Converter for...

1 Answer

Magnavox TB100MW9 DTV Digital to Analog Converter Will not display anything


If you have purcased the audio/video cables and attached them properly, all you need to do is to make sure your television on 3 or 4 (a channel with no signal). I had this problem until last night and discovered the channel setting to 3.

Jul 05, 2008 | Sony RMT-V202 Remote Control

3 Answers

TB100MW9 DTV DIGITAL TO ANALOG CONVERTER


I assume you are attempting to connect another device to the set.
Selection of the output channel is normally accomplished from the external device, not the set.

Jun 30, 2008 | Philips Magnavox 27MS343S 27" TV

1 Answer

I just bought a MAGNAVOX DTV TB100MW9. Before hook-up,we fot channels 4,6,10,20. After hook-up, all I am getting is 4 PBS channels. Why i have a dtv converter box the set up menu does not come up to...


connect the cable box to your tv using the audio/video cables
yellow -red-white
to the same colors on the rear of the tv.
switch the the input to audio/video 1 2 or 3
which ever one works.
Thanks guy9

Jun 17, 2008 | Televison & Video

Not finding what you are looking for?
Arris DCT6200 DTV Receiver Logo

291 people viewed this question

Ask a Question

Usually answered in minutes!

Top Arris Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72248 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

69199 Answers

Are you an Arris Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...