Question about Husqvarna Sewing Machines
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
There is a supressor, probably inside the case of the foot control, less likely in the body of the machine, that has burned out.......you may notice an acrid plastic/burnt odour near the source....sniff at the pedal or the rear of the machine to try to ident the location.
It is not actually necessary for the operation of the machine, it only stops interference if sewing while someone else is watching or listening to TV and Radio.
If you do not feel confident to undo, locate and remove this component I strongly suggest a quick trip to the repair shop (phone first, say the supressor is blown and ask for a quote)
You could also have a general service at the same time if it has been a while and is within your budget.
Posted on Dec 28, 2008
Yes, you should be able to just push in on the blade and flip it up out of the way. Page 22 of the machine's handbook shows how to change the blades, so you should be able to remove them the same way.
Posted on Feb 14, 2009
the eyes of the needles must line up with lower looper as they pass (timing) the distance between the needle and the looper must be exact. No distance between them and not touching. yep, that tight. they shouldnt move the needle even the slightest amount as they pass each other, yet no space between them.
Posted on Mar 19, 2009
Tips for a great answer:
Jun 15, 2016 | Sewing Machines
Jun 08, 2016 | Sewing Machines
Sep 02, 2014 | Husqvarna Viking Huskylock S15 Overlocker
Jan 31, 2014 | Husqvarna Sewing Machines
Jan 26, 2014 | Husqvarna Sewing Machines
Oct 26, 2011 | Husqvarna Huskylock Computerized 910
Feb 28, 2009 | Husqvarna Huskylock Computerized 905
Feb 14, 2009 | Husqvarna Sewing Machines
Feb 13, 2009 | Husqvarna Huskylock Computerized 910
Jun 16, 2018 | Husqvarna Sewing Machines
88 people viewed this question
Usually answered in minutes!