Question about Husqvarna Viking 1

1 Answer

I bought a new computer . I have VIP Customizing Plus embroidery software and cannot get the computer to recognize the dongle. Is there anything I can do,to get a "patch" ,to get it to work? thnak you

Posted by on

  • clara0714 Aug 26, 2010

    I did download the only upgrade I was able to find, which was 3.1.4. My software is version 6.2 and I am working on Windows XP. I have rebooted several times....still no luck. It goes about half way thru the installing process and then I get a blue screen error oxooooooo7f. I read what I could find on blue screen errors and they suggested I do windows debugging.....completely lost me at that point! Don't have any idea of where to even start. Thanks!

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 944 Answers

Hi,
Hi did you restart the system and try whether it is detecting or not.?If not

Could you please download the latest version of the
VIP Customizing Plus embroidery software.If you could not find them just mail the support team.they will send you the link.

The windows 7 and Vista cant recognize the older version.So download the latest one.

post a comment for further assistance.


thank you for using fixya have a nice day:-)

Posted on Aug 26, 2010

  • Natarajan Ramasamy
    Natarajan Ramasamy Aug 27, 2010

    Hi,
    Blue screen errors is the fault with windows XP.You have reinstall XP to solve this issue.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am looking for a replacement dongle for my VIP customizing software. My old dongle was damaged and no longer works. My software is from around 2000, however I have been asked to transfer some desi


You should contact the software vendor. They should be happy to replace your non-working dongle for a new one, even for a very old software version. They may have to charge you for the replacement dongle, but it should be much less than the cost of new software.

If they balk, know that there are now many different software options out there for much less than the typical dongle-enabled packages. Don't pay $1200 for an 'upgrade' if you can get a different package for $99. Search Google for 'embroidery software' and you'll see a lot of choices.

Jan 05, 2015 | Husqvarna Sewing Machines

1 Answer

I bought a new computer with Windows 8 & now my dongle is not recognized, why?


I tried the Husqvarna Viking dongle drivers for 4D VIP Customizing software on a new Windows 8.1 system, but nothing worked. (It worked fine on my old Vista system). After a few weeks of frustration, I found this site : http://www.safenet-inc.com/support_and_downloads/Download_Drivers/Sentinel_Drivers/.
I downloaded the Sentinel Driver v7.5.8 (they work for Windows 2000/XP/Server 2003/2008/2012/Vista & Windows 7&8 (32 bit and 64 bit)), installed it, restarted my computer, and everything worked like a charm.
Somebody should tell Husqvarna about those drivers...

Jan 26, 2013 | Sewing Machines

1 Answer

My VIP customizing reader writer box suddenly


Does your reader require a dongle/hard key? If so is it fitted correctly into the machine?

If that isn't the case perhaps an email to Viking/Husky is in order.

For Machine Support
Toll free 1-800-446-2333
Monday-Friday 8:00a - 4:00p CST
info@husqvarnaviking.com

For Embroidery Software Support
Phone: (615) 280-3510
Monday-Friday 8:30a - 9:00p CST
Saturday: 10:00a-2:00p CST
software@husqvarnaviking.com

Jul 16, 2012 | Husqvarna Sewing Machines

1 Answer

I have the old VIP Customizing software for my Des 1 and my Iris My computer was stollen and I do not have the RSWE file needed to update my dongle to make it work....VERRRRY upsetting since HUS does not...


If you have the disc to install the program if should also install the dongle automatically. I just loaded my old copy 2 weeks ago and it was all done with that one disc. You have to install the software BEFORE plugging the dongle...
feel free to e-mail me lewgnr922@gmail.com

I'm looking how to put the sample fonts from the free floppies into the program to use on my designs. Disk Manager only does designs and customizer won't recognize the fonts directly off the disc.
Any suggestions??? lew

Jan 13, 2011 | Husqvarna Designer I

1 Answer

Designer 1 vip customizing is installed on our Vista system computer but when we try to use disk mgr the response is no dongle inserted. when it in the USB port. Dongle is S/N 17311 412-7063-01...


I admit I did not think that VIP Customizing worked on Vista at all, but I now know that some people have got it going. Have you searched the www.sewmuch4retirement.com website (the late Jan Henning's website, which is an absolute gold mine of information for Husqvarna and Pfaff machines)? The other solution might be to partitition your hard drive and run Win XP on one partitition, and use that to install and run VIP Customizing. There are also Yahoo Groups specializing in Husqvarna machines and products. These groups have a lot of members with a wide range of machines, software and experience. I'm sure there is someone out there with a similar problem and someone else with the answer.

Oct 16, 2010 | Husqvarna Designer I

1 Answer

Loaded autodigitizing onto our new computer with Windows 7. Everything loaded just fine but when I try to open program it does not recognize the dongle.


There is an update for dongles and windows 7.

Info on Husqvarna Viking website - http://www.husqvarnaviking.com


When installing the 4D Embroidery System onto Windows 7 computers, the dongle drivers may not initially work correctly, as the 4D Embroidery System installs a set of dongle drivers which were created before Windows 7.
Download and install the latest dongle drivers prior to installing the 4D Embroidery System. Failure to do this, may result in the "Dongle driver not found (E0009)" when you try to open the 4D modules.
Please follow the steps below to install the latest dongle drivers BEFORE installing the 4D Embroidery System
  1. Download and install the latest Dongle Drivers.
  2. Insert your 4D Dongle.
  3. Install your 4D Embroidery System software (and all updates).
  4. Open your 4D Embroidery System software to confirm that your dongle is working correctly.
If you installed the 4D Embroidery System software before installing the latest dongle drivers and if you experience problems such as the error message "Unable to start hasplms service..."; download and install the latest Dongle Drivers.

Link to dongle drivers - http://www.vsmsoftware.net/downloads/HASP/haspusersetup.exe

Good luck.

Feb 09, 2010 | Husqvarna Designer I

1 Answer

I have a Husqvarna 1250/Viking 1+ that my aunt recently gave me when she upgraded machines. I have installed the Customizing 95 (version 1.31) software on my laptop and it works fine. However, I can not...


1. Did the software come with a dongle? This is a "key" that looks like a memory stick, that is actually a copyright protection device. You cannot access the program without it. To get the program to recognize it. plug it into a free USB Port, then power up your computer. It will read the dongle as a new device and install it on your computer. Always make sure the dongle is plugged into the same USB port as when its installation.

2. Check the operating system compatibility of your embroidery software and your computer.

What is your computer's OS? If you have Vista, it will not read Win95-XP. In that case, you may need to find a used computer to dedicate to your embroidery and install Win 98. I have XP 2000 and it reads all the Win programs back through 95.

My Husqvarna Rose/3D Embroidery Studio, will not operate with the Vista program. It will run on XP, because XP is backward compatible to previous Windows programs.

If this is the problem, you can still purchase older Windows programs very affordably. Before installing it on your hard drive, I would get expert instructions from a professional, who would back up your hard drive. I've also heard of people partitioning their hard drives, so that they could use more than one operating system.

(This is MUCH CHEAPER than purchasing a new machine and all the software, etc to go with.)

Just a note: The small notebooks they've come out with, do not have the proper drive to run your embroidery program.

3. If you have the reader'writer that came with the machine and no serial port on your computer or printer, you can take the box to your local Radio Shack or computer repair, where you can get an adapter with a serial plug on one end and a USB plug on the other, or get the "Ultimate Box Plus". The adapter is cheaper.

One, or all, of these little tidbits may fit your problem.

Hope this helps.

Aug 01, 2009 | Husqvarna Viking 1

1 Answer

What Version of VIP customizing is for Designer 1 USB stick


When you purchase the Husqvarna Viking software it comes with a code key called a "Dongle". It plugs into a usb port and "unlocks" the software. You can't just load the software and have it work without the dongle and you cannot just purchase a dongle. That software is about 3 versions old and is not being supported anymore by Viking. Their new software starts at $400 and is called 4D embroidery. Their web site shows what it can do.

May 21, 2009 | Husqvarna Viking 1

1 Answer

Husqvarna #1+ Dongle Not working with my computer.


You probably need to install the XP drivers for the dongle. I don't have the exact website at my fingertips (brain tips?) right now, but if you visit Jan Henning's Sew Much 4 Retirement website I think she has it amongst her Tips section. I had a similar problem years ago, but solved it by putting the installation CD into the computer, not running the automatic Install, then opening the program. It then goes looking for the dongle driver on the CD. This solution does not work for everyone, some need to download the drivers off the internet.

May 10, 2009 | Husqvarna Designer I

1 Answer

VIP Customizing


Not sure this will do the trick, but try loading the updates from the Husqvarna website - there have been some Patches to 3D software. Also, go to Configure and click on Reset Modules. That might do it.
Pamsquilt

Sep 23, 2008 | Husqvarna Designer I

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

963 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

184 Answers

Tally Girl
Tally Girl

Level 3 Expert

1125 Answers

Derek Massey

Level 2 Expert

92 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...