Question about Car Speakers & Subwoofers

4 Answers

Error 4 cd in toyota land cruiser - Car Speakers & Subwoofers

Posted by on

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 818 Answers
  • Sergio Scalfaro
    Sergio Scalfaro May 06, 2008

    Error messages
    If the player malfunctions, your audio system

    will display following error messages.“WAIT”:
    The compact disc player unit

    may be too hot. Allow the player to cool

    down.

    “ERROR 1”:
    The disc may be dirty, damaged

    or inserted incorrectly (up−side

    down). Clean the disc and re−insert it.

    “NO DISC”:
    The compact disc changer of

    the separate unit is empty. Insert a disc.

    “ERROR 3”:
    There is a problem inside

    the system. Eject the disc or magazine.

    Set the disc or magazine again.

    “ERROR 4”:
    Over−current. Ask your

    Toyota dealer to inspect.

    “CD OPEN”:
    The compact disc changer

    lid of the separate unit is open. Close the

    compact disc changer lid.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,037 Answers

You basically need to replace the head unit.

Simple as that, which sucks a little bit I know.

If you have any further questions, please let me know.

thanks

Posted on May 06, 2008

  • Benjamin Patri
    Benjamin Patri May 07, 2008

    Please don't forget to let me know your thoughts about my solution.





    If your problem is fixed, please rate this solution as that is one of the biggest
    aspects of how this website works and in order to receive any credit in
    helping you, I need to be rated.










    Otherwise, let me know if you have further questions and I would be glad to help.











    Thank you

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,142 Answers

Please provide the make and the model for the stereo

Posted on May 06, 2008

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 555 Answers

What is the error code you see?

Posted on May 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2013 dual cab landcruiser wiring Gide for stero


The Crutchfield web site can be very helpful on these. Here is a link: Find the car audio gear that works with your Toyota Land Cruiser

Not a 2013 but this video may help as well.

Jan 02, 2015 | Dual Car Speakers & Subwoofers

1 Answer

Toyota premio 2006 asking for map disk and only cd player only how can I solve it? anyhelp


follow this step and fix it. God bless you
There is a memory error; the unit needs to be reset. Unplug the power cord and plug it back in.

Nov 04, 2013 | Car Speakers & Subwoofers

1 Answer

How to fix the ERR1 in Toyota Yaris CD Player


Error #1 means unreadable disc.

This condition appears a few reasons:
- Burned disc. These players don't always like burned CD's. Try burning your discs slower (like 8x instead of 40x, yes this makes a difference) or using higher quality CD-R's. Made in Japan discs are the best (Taiyo Yuden). Yes this also makes a difference.
- Dirty or scratched disc.
- Dirty Laser. I've had really good luck with those CD cleaners. It is a CD with some small brushes on the bottom. Worth a shot.
- Deck is plain junk.

Additionally, in this lnk could find other details about fix-error-1-cd-player.html

Hope this helps (remember to rate this answer ans send us your comments).

May 25, 2011 | Car Speakers & Subwoofers

1 Answer

I hav a clarion auto cd/stereo displaying err 6 please explain, thank you


Error 1.Battery inside CD Changer needs to be replaced.
Error 2.CD error message. Mechanism has as eject problem or takes a long time to select CD.
Error 3.CD error message. The pick-up is out of focus during play mode due to scratches on the disc or contamination.
Error 4.Connection problem. Reconnect the data cable.
Error 5.CD error message. Could not read correct data due to CD ROM.
Error 6.CD error message. Could not read data from disc because it is upside-down.

For error code 6:
Try an original purchased cd with no scratches and see if the cd player reads it. If yes then lens is dirty or tired so try using a cleaning cd(has little brushes on it). If it doesn't read with the original cd try using the cleaning cd and if no go then look at purchasing a new cd player!

Nov 01, 2010 | Car Speakers & Subwoofers

1 Answer

2001 Lexus LS430 6 Disk CD Player ''CD ERROR''


The sixth place is where the cd that was being played has to be put before it can take another cd to play. there should be a reset button some where im not sure where yet but I will find out and let you know shortly.

Aug 27, 2009 | Car Speakers & Subwoofers

1 Answer

Error 1 comes up on screen when cd played panasonic rx77 cd and cassette player.has active screen.


Don't know if this will help, but with my panasonic CQ-C8300N there are 4 error messages, all to do with CDs.

They are as follows:

CD E1 - Disc is dirty, or upside down.
CD E2 - Disc has scratches.
CD E3 - No operation by some cause! - see your dealer.
CD E4 - The file is not readable.

From my panasonic manual.

Jul 28, 2009 | Panasonic Car Speakers & Subwoofers

1 Answer

Jensen hd5112 error 2


CD Changer Error Codes: If problems arise during CD changer operation, the following error codes may appear in the display:
ER-1: No magazine loaded.
ER-2: Problem in the disc loading function.
ER-3: Error in the disc loading function.
ER-4: Error in the disc unloading function.
ER-5: Error in the magazine position.
ER-6: Error in the laser pickup position.
ER-7: Error in the laser focus on the disc.

Dec 21, 2008 | Car Speakers & Subwoofers

Not finding what you are looking for?
Car Speakers & Subwoofers Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Speakers & Subwoofers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Car Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...