Question about Nintendo Video Game Consoles & Games

1 Answer

My contrl dont work - Nintendo Video Game Consoles & Games

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 142 Answers

I'm sure you have tried most of these steps but I'm going to list them any way. So we have a complete picture of the trouble shooting process.

1. Sync system first (by pressing the sync button located next to the SD memory slot)
2. Right after you hit the sync button on the system, hold down the 1 abd 2 buttons on the remote (or press the sync button located under the battery cover).

Try replacing the battery's and or rechargeable battery for the controller. Repeat the sync process above.

Try another controller with your wii or try your controller with a different wii. Repeat sync process above.

If another controller works with your system than that would indicate that there is an issues with your xbox controller.

If your controller works with another wii and no other controllers work with your wii than there is a issue with your console.

If your wii is still under warranty I suggest contacting Nintendo directly.

If possible please rate this solution.

Posted on Aug 26, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Steering wheel controls do not work on radio

By Who?
Was the Battery disconnected? in the Process?
Sounds Like a possible short in the Sound contrl Module

Jan 06, 2014 | 2009 Chevrolet Chevrolet Malibu LT

1 Answer

How to adjust power assist contrl valve on a 1967 mustang?

How was it working before you replaced the parts ?
Normally the front alignment makes the car want to return to center.

Aug 06, 2012 | Ford Mustang Cars & Trucks

1 Answer

Got a true cooler with a new compressor... noticed ice on evap when checking temp contrl. replaced temp contrl and still not getting as cold as it should be... ???

probably an wrong freon level. Check that out. could be a freon leak from when the compressor was replaced. Bad weld joint could be the issue.
Let me know if I can be of any further help,.

Jun 16, 2010 | True GDM-47 Refrigerator

1 Answer

I dont know how to turn on my built in webcam

go to device manager and check is driver loaded for web cam device.
go to scanners/camera icon in contrl panel and click on that
click on camera icon i u can see any live streem then web cam will be working 
if not 
restall web cam driver software and test as above


Mar 11, 2010 | Acer Aspire 5610-4648 Notebook

1 Answer

Drying cycle working but not drying clothes

First clean filter for lint - next be sure the temp sensor at blower if free of lint - next, in the heater contrl unit, two solinods contrl the heating process - I hope it's the first two ideas - Try it - Good luck

Oct 15, 2009 | Bosch Exxcel WVT 2850 Front Load Washer /...

1 Answer

I can hear them but they dont hear me

is the mic plugged into the correct socket? r u sure the mic is working? if so click on start and go to all programs > accessories > system tools > volume contrl.. make sure that the mic vol is high and its not muted

Jun 08, 2009 | Yahoo Messenger

2 Answers

Diagnostics "P1762 Manufac. Contrl. Transmission"

Had the same code on my 2002 Jeep Grand Cherokee. Started having shifting problems as well. Code is for governor pressure sensor on trans. Cost me about $800 for dealer to fix. No problems after part changed out.

May 22, 2009 | 2002 Jeep Grand Cherokee

4 Answers


Projector on Standby, press RESET, <<=, ==>, ENTER to reset lamp timer.

May 14, 2009 | Sony VPL CS4 Multimedia Projector

1 Answer

I dont knoe how to unistall the device from me computer...i installed it and it said that something was not installed right so it will not work right...

Go into Start --> Contrl Panel --> Printers and other Hardware --> System --> Hardware --> Device Manager device manager and find the device while it is plugged into the computer, right click and select uninstall.

If any software came with it, go to Start --> control Panel --> add/Remove Programs

Jun 19, 2008 | GPX Audio Players & Recorders

Not finding what you are looking for?
Video Game Consoles & Games Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Consoles & Games Experts

Bee Santiago

Level 2 Expert

268 Answers

Raj Patel

Level 3 Expert

916 Answers

Martin Murray

Level 3 Expert

1623 Answers

Are you a Nintendo Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides