Question about Dryers

1 Answer

Need instructions on how to replace the belt on my Kenmore dryer

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dryers Master
  • 7,482 Answers

ALWAYS UNPLUG YOUR DRYER BEFORE ATTEMPTING TO DO ANY WORK ON IT.
If you have to check/replace your drum belt and if you have a front loading machine.
Remove the electrical console that holds the timer switch, start switch, etc. from the top of the dryer. Be real careful not to knock any of the wires off of the timer switch or other connections.
Note: Some lids hinge and can be tilted backward and not have to be removed.
Remove the lint filter screws and filter.
Then remove the top of the dryer.
Note: Some of the tops tilt backwards and do not have to be removed completly.
Remove the front of the machine, this will expose the belt and drum, remove the drum and belt and this will expose the drum rollers, idler arm bracket with pulley, and motor with pulley. Pay attention to the route of the belt, this will come in handy when you go to reinstall the belt and drum.
Sometimes the belt will slip off of the idler arm or motor causing the drum not to turn.
While you have the drum out, I would recommend that you lubricate the drum rollers at the shaft of the roller with a good grade of machine oil like 3 in One oil. This will save you a problem later with the rollers getting noisy, also check your drum rollers for flat spots, if they have flat spots on them this will cause a noise like a thumping type noise. You will need to replace the drum rollers if they have flat spots on them.
Please rate me

Posted on Aug 26, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to put belt on hotpoint dryer


Dryer Belt Replacement - YouTube

? 6:23
https://www.youtube.com/watch?v=dFB4vnmADh0
Jun 20, 2011 - Uploaded by Repairs101
How to do-it-yourself instructional on changing the drive belt on an electric ... She wanted to know about replacing the drive beltin her clothes dryer. ..... How to replace tumble dryer beltHotpoint, Indesit, Ariston, Creda, Proline ...

How to replace tumble dryer belt Hotpoint, Indesit, Ariston ...

? 9:36
https://www.youtube.com/watch?v=kNJGHyEPiJA
Jan 30, 2014 - Uploaded by how-2-repair.com
How to replace tumble dryer belt Hotpoint, Indesit, Ariston, Creda, .... to get right and the grooves correspond to the drive, so really obvious..

Dryer Drive Belt (part #WE12M29) - How To Replace ...

? 5:14
https://www.youtube.com/watch?v=ZXSJlWcZPiY
Oct 25, 2013 - Uploaded by AppliancePartsPros
Buy the new Dryer Drive Belt WE12M29 ... to replace the Dryer Drive Belt WE12M29 on GE, Hotpoint, RCA, Sears, and Kenmore dryers.


Jan 01, 2016 | Hotpoint Dryers

1 Answer

Kenmore 96281100 diagram


If you click HERE you will find instructions onthe whole job. This covers Kenmore and Whirlpool dryers

Feb 01, 2012 | Kenmore 62602 Electric Dryer

1 Answer

Will not spin


Sounds like a broken drive belt. Below is a video showing step by step instructions on replacing a worn or broken drive belt. FYI, most Kenmore dryers are manufactured by Whirlpool and the parts are interchangable.
Best of luck!
Greg

Dec 28, 2011 | Kenmore Dryers

1 Answer

Kenmore 400 need the map for install the dryer belt


Hi,

One of these diagrams should help you with replacing that Kenmore belt...

Kenmore Dryer Belt Diagrams and Replacement
heatman101

Jan 05, 2011 | Kenmore Dryers

1 Answer

I need to know how to fix the dryer belt on model 110.97574100 (gas dryer).Also is there anyway you can email an owners manual for this. I bought it new but lost the manual


http://www.searspartsdirect.com
Kenmore Gas Dryer
Model #11097574100
Owners Manual does not have drum belt replacement instructions, but service manual does. -- SWT

Aug 05, 2010 | Kenmore Dryers

2 Answers

Dryer drum does not turn


Most likely the belt broke, replace the belt

Aug 14, 2009 | Dryers

1 Answer

I need to replace the dryer belt from a Kenmore washer dryer comb


Remove the top lid, then the front panel to access the drum and belt. Unplug the dryer first.

Jun 07, 2009 | Kenmore Dryers

1 Answer

Dryer belt replacement


To replace the belt, you have to take the front off the dryer and lift out the drum. With the new belt, place it around the drum and with the drum in place put the excess belt through the idler pulley or bracket (depending on your model), then around the motor pulley. You push the bracket or idler arm toward the motor to get the "loop" of the belt around the pulley on the motor. Hope this helps! Paul Hoffmanns

Jun 17, 2008 | Dryers

Not finding what you are looking for?
Dryers Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Brad Brown

Level 3 Expert

15478 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...