Question about Maytag MMV4203D Microwave Oven

1 Answer

We have installed the Micro Wave Model MMV4203D Stainless Steel. This model microwave was purchased at Home Depot along with a Maytag Stove , Dishwasher and Refrigerator. (All working very well with the excerption of the Micro Wave) We did not use an outside venting option. It is self venting. Problem: When the vent fan is on there is no suction. The water vapors from a boiling pan of water just accumulate on the bottom of the Micro Wave. If you place a piece of paper next to vent the paper falls to the top of the stove. Any idea what is the problem and possible solution. Lack of vent in Maine. Thanks

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 122 Answers

You vent fan motor may be trying to vent upwards instead of towards tthe front of the unit, you may need to rotate motor

Posted on Aug 26, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maytag model MMV4203 display shows SE


same thing as Samsung - shorted key - google manual

Feb 01, 2016 | Maytag MMV4203D Microwave Oven

1 Answer

Maytag model MMV4230DS00, everything seems to work but nothing heats, no humming or noises.


Hi,
Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips

heatman101

Aug 05, 2011 | Maytag MMV4203D Microwave Oven

1 Answer

On the back seam of the oven where the floor meets with the back side, there seems to be some rust. is this a problem?


It is strange as the inside of micro wave ovens are usually stainless steel. Clean off the rust, you may find it is not rust at all. If it is rust it will be problem because it means that eventually dangerous radiation will be able to escape from the oven. But clean it first and inspect if there has been any corrosion of the material under the rust.

Mar 06, 2011 | Maytag Appliances Over-the-Range Microwave...

1 Answer

The exhaust system never has worked. Will not pull any air from the cooking stove under micro as it was supposed to.


Check the cabinet over the top of the microwave, the unit should be vented to the outside of your home, if not it was a venting model and just never connected to the vents.

Jun 14, 2010 | Maytag MMV4205 Microwave Oven

1 Answer

Where do i get kit to install over the stove microwave oven


You can try this site http://maytag.com/catalog/accessory_category.jsp?cat=109 . I'm not sure what make micro wave you have but you will most likely find what your looking for on the makers web site. Good luck.

Dec 19, 2009 | Microwave Ovens

1 Answer

Amana aco 1840 over stove micro wave. heating not working .


FIK IT THE HEATING ELEMENT IS STRIGHT FORWORD AND COST IS CHEAP, GO FOR IT .

Oct 24, 2009 | Amana ACM1580 Convection Microwave Oven

1 Answer

Micro wave has come loose from hanger on bottom. Need to know how to reattach microwave to brackets. maytag mmv5100


MOST OF THEM YOU CAN TAKE THE SCREWS LOOSE FROMTHE TOP OF THE CABINET OVER THE STOVE, YOU NEED TO PPL, REMOVE TOP SCREWS HOLD IT AN TILT IT AN THEN PULL IT AWAY FROM THE WALL, MOST WALLL BRACKETS HAVE A HOOK THAT THE MICRO MOUNTS TOO IT 90%OF THE WEIGHT IS BEEN HELD BY THE WALL. GOOD LUCK LEAVE SOME FEEDBACK.!

May 28, 2009 | Maytag MMV5100A Microwave Oven

1 Answer

Aplliance fronts in stainless steel


I'm not sure about some of those appliances but ApplianceArt.com maybe able to help you. They sell stainless panels as well as the Softmetal adhesive stainless that's been on HGTV's "I Want that," "Design on a Dime," and "Real Estate Intervention." And I think some others.

May 08, 2009 | Maytag MMV4205 Microwave Oven

13 Answers

I need to buy a new MBBS Thermador Microwave


I spent the better part of three days trying to find a microwave that will fit and it's hard because so many are on line only. Last night I successfully installed the 2.2 cu. ft. GE profile counter top unit with inverter technology. The unit is an exact match, the Thermador even fits in the GE box with the styrofoam! I installed the venting materials for the side and rear vents and the platform at the bottom. I put the clips and decorative molding on and it's perfect! I found it in stock at Lowe's for $198. I took me about 45 minutes total to install. If I can do it, anyone can - 48 year old mom with 5 kids!

Nov 27, 2008 | Thermador MBBS Microwave Oven

Not finding what you are looking for?
Maytag MMV4203D Microwave Oven Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9047 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

225 Answers

Are you a Maytag Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...