Question about Sony Handycam DCR-HC28 Mini DV Digital Camcorder

Open Question

Getting error message hdv recorded tape cannot playback

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
silly girl
  • 513 Answers

SOURCE: Tape Cleaning on-screen warning

Have you tried using a different tape? Try using a sony tape if you've been trying with another brand. Sometimes they work only with their own, and it can just kick in. Could also have something to do with the battery. Try replacing. Do not let your Li-Ion batteries run all the way down before charging and do not charge them fully and let them sit idle. both of these things kill these types of batteries. Hope it helps

Posted on Apr 02, 2006

Ad
  • 169 Answers

SOURCE: error message 31:22 reinsert cassette tape

reel sensor is the problem of your camera it is a common problem to that model,maybe the pinch roller is loosen to the post cause of the lock of that is been broke..that roller is that one that pulling the tape...only a technician can put it back to the mechanism and replace that lock...in sony service they replace the whole assembly and cost a lots...i suggest find other service center for fixing it...hope that roller is not lost in your camera...

Posted on Sep 07, 2007

SOURCE: cassette loading error 31:23

I have had this same problem several times. In all cases the problem has been a tape that has been run at the very end of it's lenght and it is too tighten. I loose the tape manually just a bit and it helps. Just be careful not to leave the tape too loose.

For loosing the tape you have to push the lock button with e.g. a pen and while doing that just take the tape out just a bit. Tape should be left at the level it was. It must not look like a loosen tape. If you get it out too much, just roll it back by twisting the reel again while pushing the lock button down.

To be able to loose the tape you of course need to open the protective lid first. For this there is a separate lock switch at the side of the cassette.

Posted on Mar 05, 2008

  • 1 Answer

SOURCE: No playback pics. Blue screen.Can't record.Used x2 since service.

I just made contact with a service tech who seems very competent and who won me over. Have problem with video and audio dropout similiar to dirty heads on a 10 year old DCR-VX2000 but which is a larger problem attributed to worn parts which will need replacement. Do not know how old your unit is, but will share name of person/company if you wish. Only thing that worries me is if you by chance had had yours repaired by them!!! They are a Southern California company.

Posted on Mar 13, 2009

aneesh ch
  • 73 Answers

SOURCE: I was using my dcr-h28 minidv cam yesterday and an

first u buy a headcleaning tape and put it 5 second play then cheak again.the same complaint showing again u must go a repairing shop may be ur head gon .any doubt call 00971503853766

Posted on Jul 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

How to Edit/Convert Sony HDR-FX1 HDV Files to FCP,Adobe Premiere,Avid Sony's...


How to Edit/Convert Sony HDR-FX1 HDV Files to FCP,Adobe Premiere,Avid
sony-hdr-fx1.jpg
Sony's HDR-FX1 is the first three-CCD HDV camcorder to hit the market. The Sony HDR-FX1 HDV camcorder can record and playback both in high definition and in standard MiniDV formats, so the choice is yours. What's amazing is that with this camera, you can play and record both formats on a MiniDV tape!
With the Sony HDR-FX1, Sony developed a special compression engine. It encodes in MPEG2 at the same bit rate as DV. As a result, you can use the same miniDV tapes you're accustomed to buying to record at stunning high definition. Moreover, when in high definition mode, the camcorder records audio in MPEG1 Audio Layer II, providing excellent sound quality.
Sony HDR-FX1 Handycam Camcorder Supported Format:
Audio system: MPEG1 Audio Layer 2 Stereo;
Dolby Digital Output : MPEG1 Audio Layer 2-Stereo (HDV), PCM (DV)
Video: Digital Video Format: MPEG-2
Video Recording System: Real-Time HD Codec Engine, HDV/DV Recording
Still Image Format: JPEG
The Advantages and Disadvantages of Sony HDR-FX1 Handycam Camcorder:
Advantages:
1.Sharp and vibrant three-chip HD images;
2.Native 16:9 capture;
3. Ability to downconvert video for use with existing editing systems and displays.
Disadvantages:
1. No XLR inputs or independent audio-level controls;
2. No 24P;
3.Somewhat difficult to control and monitor focus manually;
4.Limited HDV editing and distribution options at this time.
Final Cut/Abobe Premiere/Avid/Canopus/Pinnacle/Ulead Support Sony HDV/DV files Editing
Along with the announcement of the HDR-FX1, Apple Computer is announcing support for the HDV spec with their popular video editing program, Final Cut. "Native HDV support in future releases of Final Cut will enable our customers to create high quality HD content with affordable HDV cameras, including Sony's much anticipated HDR-FX1 camcorder," said Rob Schoeben, Apple's Vice President of Applications Marketing.
Adobe has also stated that they will be releasing an HDV plug-in for their popular Premiere editing system later this year. "The Sony HDR-FX1 is a milestone product, bringing HD-quality video at resolutions of up to 1080i at a price that will encourage widespread adoption of HDV across the industry. In keeping with our commitment to lead the HD revolution, Adobe plans to release a HDV Plug-in for Adobe Premiere Pro later this year," said Steve Saylor, Vice President, Digital Imaging and Video, Adobe Systems, Inc.
Avid, Canopus, Ulead and Pinnacle also announced support for HDV. Editing support has been a big issue for HDV in the past, with third party companies supplying solutions for Final Cut and Adobe Premiere.
Aunsoft Video Converter for Mac Supports Native Sony HDV/DV files Converting
With the release of Aunsoft Video Converter for Mac, no matter what usages you want to deal with Sony HDR-FX1 recorded HDV/DV files, for sharing on your websites, YouTube, Vimeo, Dailymotion, Motionbox, Myspace, etc, for playing with your iPad, iPhone 4, iPod, Android Phones, Xbox 360, etc, for making forever collection by burning to Blu-ray or DVD, etc, it can help you to convert Sony HDV/DV files to MOV, AVI, WMV, 3GP, MP4, FLV, F4V, etc formats you wanted. Take it as your Sony HDR-FX1 converter, and you have the choice to deinterlace HDV/DV files, merge HDV/DV files into only one.

on Jul 15, 2010 | Computers & Internet

1 Answer

Hi. put in a mini-dv tape recorded on a sony z1 camera, the sony dsr-45p tape deck doesn't show any footage from the tape despite the camera had playback to show that footage was recorded. Using a windows...


the issue is probably related to the format the tape was recorded in. a z1u records in hi def (hdv) the dsr 45 is standard def ntsc. not compatable, play the tape in a z1 to recover

Oct 22, 2010 | Sony DSR-45 Mini DV VCR

1 Answer

I recorded a MiniDV with a HD camera the Canon HV30 to be specific. When trying to play it back on my Canon zr950 i get an error message. Will my tape only playback on an HD video camera? What do I do?


Canon ZR950 is an older Standard Definition camera that records in DV format, and does not recognize HDV format recorded by HV30.

HV30 can be switched to DV format, which should be playable on ZR950.

Dec 10, 2009 | Canon VIXIA HV30 DV Camcorder

1 Answer

Canon HV10 camcorder - can't get video mode to playback


hi, if you get blue screen,but your recording has been ok, then you must be change LCD FLAP, you sure get fix your camera,

Aug 30, 2009 | Canon HV10 HDV Digital Camcorder

1 Answer

HVR-Z1E Capture problem


Hi George, Sounds like you and I are of the same level with this Cam and editing , would love to compare notes with you if you would care to drop me a line gemfilmsni@yahoo.co.uk
Pat

Jun 06, 2009 | Sony HVR-Z1 Mini DV Digital Camcorder

1 Answer

Not able to import video from camcorder


Sir,
Check this  link




Thanks Good Luck
Appreciate to rate as "Fixya"

Mar 26, 2009 | CyberLink Power DVD 5.0 (cd-powerdvd5) for...

1 Answer

While trying to upload video i get std playback is locked


According to page 89 of the manual (available here), you need to set the playback standard (HDV/DV) of the camcorder to match the standard used when recording the tape. Instructions for doing this are on page 40 of the manual.

Mar 08, 2009 | Canon VIXIA HV30 DV Camcorder

1 Answer

Head cleaning required


i have the JVC MiniDV Digital Video Cleaning Cassette. I began having trouble when I was shooting DV24P and when I went to playback I noted audio dropouts. I'm using SONY Premium DVM60 tapes. I began having Head Cleaning Required message. I have ran the Cleaning Cassette and the message disappears, but even trying a brand new tape, switching to DV playback i get the error message. Luckily, the shoot i was on the master audio was being captured by a secondary device and we were able to simply use the video from my camera. Since then, I was able to play & capture both the video & audio previously recorded in HDV30P and I didnt receive an error message. Now though I cannot record any DV audio without dropouts. When I tested just moments ago, I was able to record HDV and both video & audio were clean, but during playback I still received the Head Cleaning message. Is the record head different from the playback head? Can you manually clean the heads by removing the plastic door cover with a lintfree cotton swab and rubbing alcohol (obviously disconnecting and removing all power & powering off prior to cleaning), the same way any previous machine heads were cleaned in our stations? I think I may have got a batch of bad tapes that may have gunked up one of the heads some where and its getting missed by the cleaning tape. Is is possible that the head has been scratched, and will require replacement. If yes, is there any way to look at the head and detect this?

May 31, 2008 | JVC GY-HD100 Mini DV Digital Camcorder

2 Answers

Get Final Cut Pro 5.04 to communicate with my XH A1


Many HDV cameras and decks are able to play and record DV as well as the higher-resolution HDV format. Additionally, many of these HDV devices will attempt to automatically change their settings to match the format of the tape that it's playing. Here are some tips for using these types of devices with Final Cut Pro / Final Cut Express.
Tip: Make explicit settings on your HDV device. Instead of using an "Auto" setting, make your own settings on your HDV device to keep the communication going between it and Final Cut Pro / Final Cut Express. This also helps Final Cut Pro / Final Cut Express keep things running smoothly with HDV devices that handle both DV-NTSC and DV-PAL.
For example, say you're using an HDV deck to capture footage from a tape that was recorded as DV-NTSC. Before capturing in Final Cut Pro / Final Cut Express, make sure that you set the deck to DV mode specifically—don't rely on Auto mode. With some devices, you may need to disconnect it from FireWire to change the mode.
For a common capture workflow, this sequence of steps can provide the best results:
  1. Quit Final Cut Pro / Final Cut Express if it's open.
  2. Insert your tape into your HDV deck or camcorder.
  3. Use the device's menus to set it to match the format that's recorded on the tape.
  4. Connect your HDV device to your computer with a FireWire cable.
  5. Open Final Cut Pro / Final Cut Express.
  6. Choose an Easy Setup for DV or HDV (whichever matches the format recorded on your tape).
  7. Proceed to Log and Capture.
Tip: Quit Final Cut Pro / Final Cut Express before changing modes. It's generally a good idea to quit Final Cut Pro / Final Cut Express before you change the mode on your device from DV to HDV, or from HDV to DV, and then re-open the application again.
Tip: Use an Easy Setup to play back non-default HDV format footage on your HDV device. You can use Final Cut Pro / Final Cut Express to make your HDV device play back footage in its non-default HDV format. For example, maybe you have a 1080i60 HDV device and want to play back footage that was recorded as 1080i50. Or perhaps you have a 1808i50 HDV device and you want to play back footage that was recorded as 1080i60. To do this, follow these steps:
  1. Connect your camera to your computer.
  2. In Final Cut Pro / Final Cut Express, choose an HDV preset Easy Setup that matches the format of the tape's footage (you don't need to restart Final Cut Pro / Final Cut Express).
  3. Your device's LCD display should automatically display a switch to 60 or 50, indicating the type of media that's being played.
Playing back non-default DV format footage on your HDV device You can also use your HDV device to play back footage in its non-default DV format too. For example, maybe you have a 1080i60 HDV device and want to play back footage that was recorded as DV-PAL. Or maybe you have a 1080i50 HDV device and want to play back footage that was recorded as DV-NTSC. If so, follow these steps:
  1. Make sure that your device is in DV/DVCAM mode.
  2. Put your device into Play/Pause mode, then open the Log and Capture window in Final Cut Pro / Final Cut Express.
  3. Make sure that your device's LCD (or other readout screen) displays the same format as your tape or Final Cut Pro / Final Cut Express will misinterpret what type of device you have.
Tip: Avoid recording both HDV and DV formats on the same tape. Use separate tapes whenever you want to record in a different format. If you need to record over existing footage in a different format (for example, you have a tape with DV-PAL on it, but you want to record over it with HDV 1080i50), it's a good idea to black and code the tape, or completely record over the old footage with contiguous recording in the new format. If the tape contains even a second of, say, DV in the middle of an HDV tape (or vice versa), it could cause unexpected results later when you try to capture video from that tape.
For more information, see HD and Broadcast Formats and the Final Cut Pro / Final Cut Express User Manual, available under the Final Cut Pro / Final Cut Express Help menu

Dec 04, 2007 | Canon XH A1 Mini DV Digital Camcorder

Not finding what you are looking for?
Sony Handycam DCR-HC28 Mini DV Digital Camcorder Logo

Related Topics:

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Cameras Experts

Larry Stiles
Larry Stiles

Level 2 Expert

287 Answers

kakima

Level 3 Expert

102366 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...